Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Roof Replacement & Installation in Fort Lauderdale: What to Know First
CWS roof replacement and installation in Fort Lauderdale runs $1,400 to $4,800 for most residential jobs, depending on deck condition, slope, and which CWS system you’re putting on. We’re an independent CWS service provider, not a manufacturer arm, which means we quote the work straight and stand behind what we install. Most CWS roof jobs take two to four days once permits clear and materials land. If you own a CWS home in Fort Lauderdale and the roof is failing or near the end of its life, call (954) 280-4413 and we’ll schedule a free estimate.
This page is written for CWS owners in Fort Lauderdale who want to know what a replacement actually costs, where the process is going to hit, and who they’re handing the job to.
Key Takeaways
- Independent CWS roof replacement and installation in Fort Lauderdale, not manufacturer-licensed work
- Free estimates with written line-item pricing; no change orders unless you sign for a scope change
- We register every material warranty in writing before our truck leaves your driveway
- All work covered by the Done Right Promise and The Keystone Standard
- Live person answers the phone 24/7 at (954) 280-4413
How CWS Products Fail - and How We Fix Them
- CWS Classic/Estate Series composition shingles. We see granule loss and premature cupping on south-facing slopes in Fort Lauderdale within 12 to 15 years, not the 25 the paperwork suggests. The heat load is genuine here, and the humidity keeps the decking damp beneath the felt. Our fix is a full tear-off to inspect decking and replace compromised sheets before laying the new system, not just laying over the old layer.
- CWS Premier Metal Panel roofs. The most common failure we see on these in Fort Lauderdale is not the panels themselves. It’s the neoprene washers on the fasteners breaking down in the salt air, especially within two miles of the Intracoastal. Once the washer fails, water wicks under the panel edge and you get rust trails on the underside. We replace with EPDM washers rated for coastal exposure and re-torque every fastener to spec.
- CWS Defender Tile Profile roofs. In Fort Lauderdale, the flat-profile concrete tile roofs pick up wind-driven rain at the hips and ridges. The original installs often skipped a proper ridge ventilation detail, which means the attic holds moisture and cooks the undersides of the tile. We correct the ventilation first, then set tile back with proper fastening patterns for the high-velocity wind zone.
- CWS flat/low-slope systems on Fort Lauderdale additions and porches. These fail at the seams and flashing before anything else. The original CWS installs on 1980s and 1990s homes often used torch-down that shrinks over time and pulls away at the parapet walls. We inspect the entire seam line and re-flash with materials approved for our climate rather than patching the visible spot and hoping.
- CWS skylight and penetration flashings. This one surprises owners. The roofing membrane can be fine, but the factory flashing detail around a CWS skylight or vent pipe will be the first thing to leak. We replace these with a formed metal detail that laps correctly in the right direction for Fort Lauderdale’s prevailing rain, which comes in off the ocean from the southeast in the summer and the northwest in the winter. Most original installs only accounted for one direction.
Our CWS Roof Replacement & Installation Process
Dale Kessler’s rule applies to any job we take on: if it is not right on paper, it will not be right on the wall. For CWS roof work, that means nothing left to guesswork.
- 1
Call and schedule a walk-through. One of our background-checked techs meets you in Fort Lauderdale, walks the roof, and inspects from the attic side where possible. We document everything in photos and write down what we see.
- 2
Written scope and pricing. We put your options on paper, side by side, with line-item costs so you see exactly what you’re buying. No verbal estimates and no vague allowances.
- 3
Permits pulled. We pull the permit for your Fort Lauderdale address and handle all inspections. This is standard, not an add-on.
- 4
Tear-off and deck inspection. We remove the old system completely and inspect the decking before we lay anything down. Any rotted or delaminated wood gets replaced before the new roof goes on.
- 5
Install to manufacturer spec. We install your CWS system with the correct fastening pattern, underlayment, and flashing details for this climate and wind zone.
- 6
Final walk-through and warranty registration. Before our truck leaves, we register both warranty layers in writing and hand you the paperwork. If it’s not done right, you call us and we make it right.
What CWS Roof Replacement & Installation Costs in Fort Lauderdale
Here’s where the money goes on a CWS roof job in Fort Lauderdale:
- Full tear-off and replacement, 1,500 sq ft ranch: $6,500 to $12,500, depending on CWS system and decking repair
- Small flat roof section over a porch or addition: $2,800 to $5,400
- Re-flashing around skylights, chimneys, or vents: $600 to $1,600 per penetration
- Decking replacement (per sheet): $70 to $110
- Permit and inspection fees for Fort Lauderdale: $400 to $900
What moves the price is slope, access, hidden deck rot, and the condition of your existing flashing. We quote all of it in writing before the job starts. Call (954) 280-4413 for a free estimate on your CWS roof replacement in Fort Lauderdale.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for CWS Work
We’ve been serving local communities since 2008. Dale Kessler grew up in Sailboat Bend and learned the trade at McFatter Technical College in Davie before spending decades working glass and framing along South Florida’s coastal corridor. That means we know what Fort Lauderdale weather does to a CWS roof. We’ve seen it across Coral Ridge, Rio Vista, and Dania Beach.
We’re also authorized installers for more than a dozen manufacturer lines, including PGT, CGI, ES Windows, and ECO Window Systems. So when a CWS roof replacement connects to window flashing or a wall intersection with your windows and doors, we handle the entire transition in-house instead of punting it to a second contractor. Every job is covered by the Done Right Promise. A live person answers our phone at (954) 280-4413, twenty-four hours a day, seven days a week. And we register both warranty layers before our truck leaves your driveway. That’s the standard.
FAQs
You don’t need to go through CWS. We’re an independent CWS service provider, which means we can inspect, quote, and install without waiting on a manufacturer dispatch. In practice, most Fort Lauderdale CWS owners get a faster response and a straight answer from a local contractor who’s seen the specific failure before. Call (954) 280-4413 and we’ll tell you what we see, free.
It can, yes, as long as the work doesn’t void the specific terms of your CWS warranty. We read the warranty language on your job before we touch anything and we’ll tell you plainly if a repair strategy could jeopardize your coverage. That’s part of putting it in writing before the work starts. If you have a CWS roof warranty question, call us at (954) 280-4413 and we’ll help you sort it out.
Emergency CWS roof repair in Fort Lauderdale typically lands between $450 and $2,800 depending on the damage, with temporary tarping at the lower end and structural repair at the top. If a CWS roof failure has water coming into your home, call (954) 280-4413 right away and a live person will answer, day or night.
If the decking is sound and the failure is isolated to flashing or a small seam, a patch usually makes sense. If you’re seeing recurring leaks, granule loss across the entire slope, or moisture in the attic, a full CWS roof replacement in Fort Lauderdale is often the cheaper option over five years. We’ll show you both paths on paper and let you choose. Estimates are free.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After