Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Shingle, Tile & Metal Roofing in Fort Lauderdale: What to Know First
CWS shingle, tile, and metal roofing repair in Fort Lauderdale typically runs between $350 and $1,800 depending on what failed, and most jobs are completed in a single visit. We’re an independent CWS service provider, not a factory-authorized shop, which means we tell you plainly when an OEM part is the right call and when a quality aftermarket replacement will hold up just as well in this climate. This page is for homeowners who own a CWS roof system and want an honest assessment, not a sales pitch. If you have a leak, loose tile, or a metal roof panel that’s starting to lift, call us at (954) 280-4413 and we’ll talk through what you’re seeing before we ever schedule a truck.
Owners of CWS shingle, tile, and metal roofs in Fort Lauderdale call us when something is wrong but the last contractor they tried could not tell them why. We can.
How CWS Products Fail - and How We Fix Them
Every roof system has its own weak points. We’ve spent years working on CWS installations across Fort Lauderdale, and certain failure patterns show up again and again. Here’s what we find and what we do about it.
- CWS shingle systems with valley flashing separation. On CWS asphalt shingle roofs, the most common failure we see in Fort Lauderdale is valley metal pulling away at the seams after a few seasons of thermal expansion. Water finds the gap, runs under the shingle course, and stains the ceiling below. The fix is not more caulk. We pull the affected shingles, reset or replace the valley flashing with proper overlap, and re-secure the shingle courses. Caulk is a temporary patch; we do the repair so it stays repaired.
- CWS tile roofs with loose ridge caps after wind events. Fort Lauderdale gets real wind, and CWS tile systems with mechanically fastened ridge caps hold up better than most. But we regularly find caps that were bedded in mortar only, no fasteners. After a storm, the mortar cracks and the cap shifts. We remove the loose cap, inspect the water channel beneath, reset with a proper adhesive system and mechanical fasteners where the profile allows, and check every cap along the ridge while we’re up there.
- CWS metal roof panel screws backing out. On CWS standing seam and exposed-fastener metal roofs, the single most common issue is fasteners that work loose over time. The neoprene washers degrade under South Florida UV, and the screw slowly backs out. Water follows the screw shank. We replace with properly matched fasteners and new washers, and we check the surrounding panels for the same problem. A roof leak is rarely one screw; it’s usually a pattern.
- CWS tile systems with cracked field tiles from foot traffic. Tile roofs in Fort Lauderdale get climbed more than homeowners realize: tree trimmers, pest control, satellite installers. CWS tiles are solid, but a hairline crack lets water wick underneath. We identify the cracked tiles, replace them with matching profile and color, and if we see a recurring traffic area, we’ll tell you how to prevent the next crack instead of just selling you another tile.
- CWS shingle roofs with nail pops along the decking. In older Fort Lauderdale homes, we see CWS shingle roofs where the decking expands and contracts with humidity, and fasteners start to back out beneath the shingle. You’ll see small bumps in the shingle surface. Left alone, the shingle tears and water gets in. We identify the popped fasteners, secure them, and patch the shingle. It’s a small fix that prevents a much larger decking repair down the road.
Our CWS Shingle, Tile & Metal Roofing Process
We’ve learned the hard way that roofing work without a clear sequence wastes the homeowner’s money and the crew’s time. Here’s how a CWS job goes when you call TruePane Windows & Doors.
1. You call, our estimator answers. We ask for the address, the type of CWS roof system you have (shingle, tile, or metal), and what you’re seeing: a leak, a missing tile, a lifted panel, water staining. If we can save you a service call with a few targeted questions, we will.
2. We schedule the visit on a day a real estimate can be delivered. Our technician arrives in a marked vehicle, uniformed, and background-checked. We walk the roof and measure twice before we touch anything. Dale Kessler’s rule is simple: if it is not right on paper, it will not be right on the wall. Same goes for roofs.
3. You get a written estimate with the problem stated in plain English. If the leak is one loose valley seam, the quote says that. If the flashing is past saving and needs replacement, the quote says that too. We give you line items and dollar figures, not vague categories.
4. Parts get decided before work starts. For CWS systems, we’ll tell you when the OEM part is the smart choice, when a quality aftermarket part will perform the same and save you money, and what each option means for any remaining warranty. You make the call with the facts in front of you.
5. The repair is done, tested, and shown to you. We don’t leave until the affected area is verified dry and secure. If weather permits, we water-test the repair. You see what we did before the invoice is settled.
6. You’re covered by our Done Right Promise. If our work is not right, we make it right. No paperwork fights, no arguing, no fine print that covers neither.
What CWS Shingle, Tile & Metal Roofing Costs in Fort Lauderdale
Here are the honest numbers for CWS work in this market, based on what we’ve quoted and completed in Fort Lauderdale over the last several years.
| CWS Repair Scenario | Typical Range in Fort Lauderdale |
|---|---|
| Single valley flashing re-seal and shingle reset | $350-$650 |
| Ridge cap reset (mortar removal, re-bed, mechanical fasten) | $300-$550 per cap |
| Metal roof panel screw replacement (per panel) | $125-$275 |
| Field tile replacement (cracked tile, matching profile and color) | $40-$90 per tile |
| Valley flashing replacement (full valley) | $800-$1,800 depending on length and access |
What moves the price: roof pitch, access from the ground, whether the decking beneath is compromised, and how long the leak has been active. A roof that’s been leaking for a month costs more to repair than one caught in the first week. We give you the price before the work starts, not after. Call (954) 280-4413 to schedule a free estimate.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for CWS Work
We’re a windows and doors company by trade, and we’ve been serving Fort Lauderdale homeowners since 2008 through Dale Kessler’s second-generation glazier practice. Roofing repair came into the business for a practical reason: the same thermal movement, wind exposure, and humidity that fails a window seal also fails a roof flashing. Our technicians understand building envelopes, not just single components. That’s why CWS owners call us when another roofer has already given them a vague answer or an expensive replacement quote. We also work on related systems from PGT, CGI, ES Windows, and ECO Window Systems, which helps when a roof leak has damaged a window or door assembly below. The Done Right Promise covers every CWS repair we touch, and a real person answers the phone 24 hours a day.
FAQs
In most cases, a properly performed repair does not void your CWS warranty, provided the work does not alter the roof system’s original design or coverage. Where an OEM part is available and specified, we recommend it. Where an aftermarket part is appropriate, we’ll tell you before any work is done. If you want a warranty-safe path, call (954) 280-4413 and we’ll walk you through what your specific CWS system requires.
Yes, most CWS shingle, tile, and metal roof components are available through regional suppliers we work with regularly. If a specific profile or color is discontinued, we’ll source a matching alternative or tell you honestly if a full replacement section is the better financial choice. Call us with your roof type and we’ll check availability before you commit to a visit.
Most CWS leak repairs are completed within three to five business days of your initial call, depending on parts availability and weather. Emergency temporary mitigation, like tarping or sealing an active leak, can often be scheduled sooner. A live person answers our phone 24/7, so the fastest way to get on the schedule is to call (954) 280-4413 right now.
You know by looking at the scale of the problem. A single cracked tile, one lifted panel, or a localized valley leak is a repair. Water damage across multiple roof planes, decking rot visible beneath the shingles, or loose tile across more than 20 percent of the roof surface usually points to replacement. We’ll tell you which one you’re dealing with and we won’t quote a replacement when a $500 repair solves the problem. Call (954) 280-4413 for an honest assessment.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.