Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Windows & Doors in Miami, FL | TruePane Windows & Doors
We provide our Cws services across Miami, from pre-Andrew CBS homes in Westchester to bayfront condos near Biscayne Bay. The one thing that makes our CWS work here different: we know which CWS units pass Miami-Dade’s High Velocity Hurricane Zone code and which ones fail, and we’ll tell you straight before you spend a dollar on a repair that won’t hold. Call (954) 280-4413 for a free estimate.
Why Miami Residents Choose Us for CWS Service
We work on CWS windows and doors in Miami-Dade every week. That’s not a slogan. Our crews have pulled original CWS 200 Series single-hungs out of 1970s CBS homes in Kendall, replaced corroded 7000 Series sliding door hardware in bayfront high-rises, and rebuilt subsill bucks that were never engineered for current impact anchoring. Dale Kessler, our owner, learned the trade at McFatter Technical College in Davie and spent two decades working glass and framing along South Florida’s coastal corridor before founding TruePane. He’s the one who insists every opening gets measured twice before a truck rolls. That habit matters more in Miami than almost anywhere, because a CWS frame that’s out of square by a quarter inch will leak air and water the first time a 140 mph gust loads it.
Common CWS Windows & Doors Problems We Solve in Miami
- Salt-air pitting on CWS aluminum frames. Within a mile or two of Biscayne Bay or the Atlantic, we see CWS aluminum frames with pitted corner welds and clogged weep holes after as little as five years. The salt-laden air works into the mill finish and starts corrosion that standard inland frames never see. We treat this with marine-grade refinishing or full replacement, depending on how far the pitting has eaten into the extrusion.
- IGU seal failure in CWS insulated glass. Miami’s humidity and the thermal stress between air-conditioned interiors and 90-degree exteriors causes fogging in CWS insulated units in as few as five to seven years. Once the seal goes, the argon leaks out and the glass clouds. We replace the IGU with a new sealed unit rather than trying to “repair” a failed seal, which nobody can honestly do.
- Stripped or corroded locking hardware on CWS sliding doors. Original CWS 7000 Series sliding doors on pre-Andrew homes often have lock mechanisms seized by salt spray. The strikers corrode, the cylinders bind, and eventually the door won’t latch securely. We replace with OEM CWS parts when available, or ANSI-rated aftermarket hardware that meets Miami-Dade NOA standards when the original parts are discontinued.
- Frame racking on CWS casement windows in CBS homes. Concrete block construction settles over decades, and the subsill buck beneath an original CWS casement window was never designed for the anchoring schedules Miami-Dade now requires. When the buck fails or shifts, the sash binds, the operator gears strip, and air and water find their way in. This is a structural repair, not a lubrication job.
- Pre-1992 CWS jalousie windows with no hurricane protection. Tens of thousands of CBS homes across Hialeah, Westchester, and Kendall still have original jalousie windows, many of them CWS-branded from the original build. These louvered glass units are banned in new construction under Miami-Dade code and offer essentially zero wind-borne debris protection. Removing them and installing NOA-approved impact units is a job we do constantly, and it’s one a contractor in Tampa or Orlando will rarely, if ever, encounter.
CWS Service in Miami: What Local Conditions Mean for Your Equipment
Here’s what nobody outside Miami has to deal with: every window or door replacement in Miami-Dade County must carry a Miami-Dade County Notice of Acceptance, the NOA. This is the product-approval standard for the nation’s only designated High Velocity Hurricane Zone, and it’s stricter than anything in the rest of Florida’s building code. What that means for CWS owners specifically is this: original CWS units on pre-1992 CBS homes almost always fail wind-borne debris review. The single-pane glass, the original anchoring, the subsill buck, the frame extrusions, none of it was built for 175 mph design wind speeds. On a home in Westchester, Kendall, or Cws service in Hialeah, a CWS window that could be repaired in Tampa often requires a full frame replacement here. There is no way around it. The NOA is not a suggestion, and a contractor who tells you a cosmetic repair will bring an original CWS unit into code compliance is not doing you a favor. The one saving grace: upgrading to NOA-approved impact glass earns Florida wind-mitigation insurance credits, and in Miami those premium reductions can be substantial. We walk homeowners through that paperwork on every replacement we do.
CWS Models & Products We Service in Miami
We service the CWS series most common in Miami’s housing stock: the 200 Series single-hung and sliding windows found on 1980s aluminum-frame construction, the Architect Series casement and awning windows that went into mid-range CBS homes, the 7000 Series impact-rated sliding glass doors that were a premium upgrade before Andrew, and the Estate Collection double-hung and picture windows on higher-end builds. Our parts approach is straightforward. We use OEM CWS parts when they’re available. For older discontinued series, we source ANSI-rated aftermarket hardware and weatherstripping that meets Miami-Dade NOA requirements. We keep common CWS-compatible hardware stocked locally so a sliding door lock or casement operator doesn’t take two weeks to arrive. If the CWS frame is severely corroded, out-of-square, or no longer meets wind-load calculations, we recommend full replacement with a code-compliant impact unit. That’s a repair-vs-replace call we’ll make honestly, because we’re independent and answer to you, not a manufacturer quota.
CWS Service Pricing in Miami
CWS window and door service in Miami typically runs from about $180 for a simple hardware replacement up to $2,500 or more for a full impact-rated frame replacement, depending on the unit and the condition of the opening. A few things drive the cost here specifically: whether the existing subsill buck can be reused or needs reconstruction, whether the rough opening meets current anchoring schedules, and whether the home’s proximity to salt water has accelerated frame corrosion. Every estimate includes a written line item breakdown of parts, labor, and any anchoring work, so you see exactly what you’re paying for before we start. Call (954) 280-4413 for an exact quote on your CWS windows or doors. Estimates are free, and we’ll tell you if a repair makes sense or if you’re better off replacing the unit.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Miami
You can repair the hardware and glass, but jalousie windows cannot legally be installed as new construction under Miami-Dade code and will never pass wind-borne debris review. The louvered design simply cannot hold an impact rating. Replacing them with NOA-approved impact units is the only way to meet HVHZ requirements and qualify for wind mitigation credits. Call (954) 280-4413 and we’ll walk you through your options.
Yes. The wind-mitigation insurance credit is based on the product’s NOA approval and the installation meeting Miami-Dade anchoring requirements, not on who sold or installed the unit. An independent contractor can install NOA-approved CWS impact windows and the homeowner still qualifies for the premium reduction, provided the wind mitigation inspection documents the installation. We handle that paperwork as part of the job.
Salt-laden air corrodes standard aluminum window frames, weep holes, and hardware within years rather than decades. We see Cws repair in Key Biscayne and CWS frames within two miles of Biscayne Bay with pitted corner welds and seized lock cylinders that inland units never develop. Marine-grade anodized or painted finishes are a functional necessity near the water, not an upsell. If your CWS hardware is binding or showing white powdery corrosion, call (954) 280-4413 for an assessment.
No. Condensation between the panes means the insulated glass unit’s seal has failed and the desiccant inside is saturated. The only correct fix is replacing the IGU with a new sealed unit. We can often do this without replacing the entire door, if the frame is still square and the rollers are sound. Call (954) 280-4413 and we’ll tell you over the phone whether it’s likely an IGU-only job or a full door replacement.
Any replacement of an entire window or door unit in Miami-Dade requires a permit, because the new installation must meet current HVHZ anchoring and product approval requirements. A direct repair of an existing unit, like replacing a lock cylinder or a glass pane within the original frame, can usually be treated as maintenance without a permit. We pull permits on every job that requires them and pass inspections before we call the job done.
Service Areas Near Miami
We provide Miami service area coverage across Miami-Dade and into nearby communities. Our crews regularly work in Westchester, Kendall, Hialeah, and Coral Gables, and we cross the causeways for CWS service in Miami Beach and head north when needed for CWS service in Miami Gardens. If you’re within an hour of downtown Miami, we can usually schedule you within the week.
Book Your CWS Service in Miami Today
Call (954) 280-4413 to schedule your free CWS estimate. We’ll send a background-checked, uniformed technician who measures every opening twice and quotes you honestly, on paper, before any work starts. Same-day service is often available for urgent repair calls.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miami since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After