Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Windows & Doors in Edgewood, FL | TruePane Windows & Doors
We provide independent ES Windows service across Edgewood, and the thing that makes our work here different is simple: we know this half-square-mile city has its own building department, its own permit queue, and a housing stock full of 1950s-70s CBS ranch homes still carrying original aluminum windows. That changes how every ES Windows repair or replacement gets done. If you’ve got a fogged seal, a corroded frame, or a crank that won’t turn on an ES unit, call TruePane Windows & Doors at (954) 280-4413 and we’ll walk you through it.
Why Edgewood Residents Choose Us for ES Windows Service
We’ve been pulling failed windows out of mid-century concrete block homes long enough that nothing surprises us anymore. Dale Kessler started in this trade learning how humidity and aluminum don’t always get along, and that’s the exact problem most ES Windows owners in Edgewood are dealing with. Our techs know ES hardware, ES seal geometry, and how the original rough openings in these 1950s-70s ranches force you to adapt new units rather than drop them in. We carry OEM-compatible parts for common ES failures, and we stock tested aftermarket components for the older profiles where the factory no longer makes the piece you need. You get a straight answer on repair versus replace, and you get it the first visit.
Common ES Windows Windows & Doors Problems We Solve in Edgewood
- Failed IGUs from humidity ingress. We see this all over Edgewood, but especially where a jalousie got converted to an ES unit and the new frame wasn’t fully shimmed and sealed. Moisture gets behind the glass, the seal delaminates, and you’re staring at condensation between panes. Fix means new insulated glass, properly bedded this time.
- Corrosion at ES frame corners. Original 1950s-70s slab openings in Edgewood ranches often lack real drainage at the bottom track. Water sits against the aluminum, the anodizing breaks down, and the corners start to bubble and flake. We’ll tell you honestly when that frame is too far gone to save.
- Binding casement cranks. ES casement sashes bolted into uninsulated CBS walls go through serious thermal cycling every summer. The frames shift, the sash goes out of square, and the operator mechanism starts grinding. Sometimes it’s a gear kit. Sometimes it’s realignment. Sometimes the frame’s done.
- Chalky oxidation on west and south sides. Edgewood sits inland, but the UV here is no joke. ES aluminum frames on the afternoon sun sides will show white chalky oxidation within 7 to 10 years. It’s cosmetic until it isn’t, because the same breakdown that makes it look bad eventually compromises the corner seals.
- Worn or torn weatherstripping on ES sliders. The original ES Series 700 horizontal sliders in these Edgewood homes are aging fast. When the wool pile deteriorates, you get air leaks, water intrusion at the sill, and a track that fills with grit. This one’s usually an easy same-visit fix with the right seal stock.
ES Windows Service in Edgewood: What Local Conditions Mean for Your Equipment
Here’s the thing most window companies won’t tell you when they quote an Edgewood job. Every Window Installation - Edgewood has to go through the City of Edgewood’s own building department. Not Orange County. Not Orlando. The city hall on Hansrob Road handles permits, and that means a separate queue and a separate inspector. A house one block north, inside Orlando city limits, can sometimes get signed off weeks earlier than an identical job in Edgewood. For ES Windows owners, that changes how we sequence the work. We pre-file Edgewood permits before we order the units, and we coordinate wind mitigation paperwork with Edgewood’s building official ahead of the inspection. If that’s not done up front, the job stalls, and you’re the one waiting. Edgewood’s adopted Florida Building Code still requires wind-load ratings that original single-pane aluminum from the 1960s can’t meet, so on older ES units we’re often having the conversation about full replacement rather than patching another seal. The city’s permitting pace is what it is, but our part is being ready so the inspection doesn’t drag.
ES Windows Models & Products We Service in Edgewood
We service the full ES Windows line that shows up in Edgewood homes: the Series 500 single-hung, Series 600 casement, Series 700 horizontal slider, and the impact-rated casement with simulated divided lites. When factory parts are available, we use genuine ES Windows components. When the model’s been out of production long enough that the factory no longer supplies the profile, we source tested aftermarket hardware and seal kits that meet or exceed Florida Building Code. We keep common ES weatherstripping, balance hardware, and operator gear kits on the truck for faster Edgewood calls. For deeper cuts like custom IGUs, we order from local fabricators we’ve used for years, so turnaround stays tight. Our full ES Windows expertise lives on the ES Windows sales & service page if you want the deeper bench on models and options.
ES Windows Service Pricing in Edgewood
| Service | Price Range |
|---|---|
| ES Windows diagnostics / tune-up | $89 (maintenance visit rate) |
| IGU replacement (single pane) | $180-$340, depending on coating and size |
| Operator/crank gear kit replacement | $120-$250 installed |
| Weatherstripping re-seal, full perimeter | $160-$300 |
| Full frame ES replacement, permit-ready | Quoted per opening, $900-$2,400+ typical for Edgewood ranches |
What drives the cost in Edgewood is the same thing that drives everything else here: concrete block rough openings that need adapting, permit fees paid to the city, and code-required attachments for wind load. A free estimate means we come out, measure, show you the line items on paper, and register both warranty layers in writing before the truck leaves. No surprises, no change orders. Call (954) 280-4413 for your free estimate.
Serving Edgewood, FL - Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in Edgewood
Edgewood is its own incorporated city with its own building department, so every window and door replacement gets permitted and inspected through Edgewood city hall rather than Orange County or Orlando. The practical effect is a separate permit queue that can move slower or faster than neighboring jurisdictions, which is why we pre-file Edgewood permits before we order your ES units. Call (954) 280-4413 and ask us to check the current Edgewood inspection schedule for an accurate timeline.
Almost never. The original aluminum single-pane sliders installed in 1960s Edgewood ranches were built before Florida’s wind-load standards existed, and they typically fail the structural load calculations Orange County’s adopted Florida Building Code requires. In most cases the honest answer is full replacement with an impact-rated ES unit rather than trying to retrofit compliance onto a frame that won’t pass a wind mitigation inspection.
Yes, as long as the frame is square, the corners aren’t corroded, and the existing unit isn’t part of a permit-required upgrade. We’ll replace the IGU with genuine or equal-quality glass and re-seal the sash. But if the frame’s showing oxidation at the corners or the crank’s already binding, we’ll tell you straight: sometimes patching costs more over five years than replacing once. Call (954) 280-4413 and we’ll assess it honestly.
It fits, but not without adaptation. Jalousie openings in these CBS ranches are usually narrower and taller than modern casement dimensions, so the rough opening needs re-framing, new flashing, and proper shimming. We do this regularly on Azalea Lane and throughout Edgewood, and we handle the full frame replacement including the permit-ready wind load attachments. For the specifics on your opening, call (954) 280-4413.
The Series 500 single-hung and Series 700 horizontal slider are the two we see failing most in Edgewood, mostly from failed IGUs where humidity got behind the seal, or from corrosion where the slab opening trapped water against the bottom track. The fix depends on frame condition: if the frame’s solid, we replace the glass and re-seal. If the corners are bubbling and pitted, we recommend full replacement with a new ES unit that meets current wind-load code. Call (954) 280-4413 and we’ll give you a straight read on your particular window.
Service Areas Near Edgewood
TruePane Windows & Doors serves Edgewood and the surrounding Central Florida communities. If you’re nearby, we also provide ES Windows service in El Portal and ES Windows service in Eustis. Our full coverage area is listed on the Edgewood service area page. We work throughout Altamonte Springs, Orlando neighborhoods, and the smaller incorporated cities around Orange County.
Book Your ES Windows Service in Edgewood Today
If the pane is not true, the job is not done. That’s the rule we’ve worked under from the start, and it’s the rule that governs every ES Windows repair and replacement we do in Edgewood. Call TruePane Windows & Doors at (954) 280-4413 to schedule your free estimate, and we’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Door Installation - Edgewood, serving Edgewood since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.