Mr-Glass Custom & Geometric Windows Nationwide | TruePane Windows & Doors

Mr-Glass Custom & Geometric Windows in Fort Lauderdale: What to Know First

TruePane Windows & Doors provides independent Mr-Glass custom and geometric window service in Fort Lauderdale as an independent Mr-Glass service provider, with most repair and replacement jobs completed in a single visit. Typical Mr-Glass shaped window work in Fort Lauderdale runs between $450 and $2,800 depending on the geometry, glass package, and whether the frame can be salvaged. We are not affiliated with or authorized by Mr-Glass, but our technicians work on their custom and geometric lines regularly throughout Broward County. This page is for Mr-Glass owners who need straight answers about repairs, parts, and honest pricing. Call (954) 280-4413 for a free estimate.

Call (954) 280-4413

How Mr-Glass Products Fail - and How We Fix Them

Fort Lauderdale’s salt air, humidity, and hurricane cycles expose weaknesses in any window line, and Mr-Glass custom shapes have their own failure patterns. Here is what we see most often in the field.

• Radius and arch sealed-unit fogging. Mr-Glass curved and arched units rely on flexible spacer bars that bend to the radius. Over time, the bend points on the spacer can crack microscopically, letting humid Fort Lauderdale air into the airspace. The glass fogs, and no amount of cleaning fixes it. We order replacement sealed units cut to the exact radius from a local fabricator, then reset and reseal the sash. If the original was a single-glazed radius unit, we can often upgrade to impact-rated laminated glass without changing the frame.
• Trapezoid and parallelogram frames pulling out of square. Geometric windows like trapezoids and parallelograms put uneven stress on the frame corners. In Fort Lauderdale’s wet-dry cycle, wood and older aluminum frames flex, and corner keys work loose. You will see the glass start to bind, or daylight sneaking in at the corners. We square the frame, replace the corner keys with reinforced versions, and re-bed the glass. If the frame is too far gone, we quote a full replacement before we touch anything.
• Custom picture window seals failing on the shaded side. Large fixed Mr-Glass geometric picture windows in Fort Lauderdale often sit partially shaded by eaves or awnings. The shaded side stays cooler, the sunny side bakes, and the thermal difference stresses the edge seal unevenly. Condensation between the panes shows up first on one side, not across the whole unit. We replace the sealed unit and recaulk the glazing channel with a marine-grade sealant designed for South Florida sun and salt exposure.
• Oversized openings settling and crushing the frame. Homes in older Fort Lauderdale neighborhoods like Sailboat Bend and Victoria Park shift. When a big custom window opening settles, the frame gets pinched, and the glass carries load it was never meant to carry. Cracks start at the corners, or the window stops opening. We fix the root cause first by shimming and reinforcing the opening, then address the window. Skipping the structural work means you will be replacing that window again in five years.
• Obsolete hardware on geometric casement and awning units. Some Mr-Glass custom casements and awnings used proprietary hinge and operator hardware that is no longer manufactured. When a hinge strips or an operator gear fails, you cannot just swap parts from a big-box store. We source OEM hardware through our distributor network first, and where OEM is gone, we have machined adapter plates so quality aftermarket hardware fits without redrilling the frame. That keeps the original sash geometry intact.

Our Mr-Glass Custom & Geometric Windows Process

Every Mr-Glass job we take in Fort Lauderdale follows the same path, whether it is a repair or a full replacement. Here is how it works.

1. 1
   Call and get a real person. You call (954) 280-4413. A live person answers, 24 hours a day, every day. You describe the window and the symptom. We schedule a visit.
2. 2
   We measure and diagnose on site. A background-checked, uniformed technician arrives when we say they will. They measure the opening and the unit itself, check the frame for square, and identify the failure point. Dale Kessler’s founding rule applies here: if it is not right on paper, it will not be right on the wall.
3. 3
   Parts decision: OEM first, quality aftermarket second. For Mr-Glass work, we always try OEM hardware and sealed units first. Where OEM is discontinued or cost-prohibitive, we will show you the aftermarket option side by side on paper with the trade-offs, and you decide. We do not decide for you and surprise you later.
4. 4
   The repair or replacement. We do the work in a single visit whenever the parts are in hand, which for most Fort Lauderdale Mr-Glass repairs they are. We re-bed glass, square frames, replace hardware, and seal everything properly.
5. 5
   We test before we leave. We check the operation, the seal, and the fit. If the pane is not true, the job is not done. We do not leave a window that looks right but is not right.
6. 6
   We register your warranty on the spot. Both manufacturer warranty layers, in writing, with durations stated, before the truck leaves your driveway. That is The Keystone Standard, and it is non-negotiable.

What Mr-Glass Custom & Geometric Windows Costs in Fort Lauderdale

Prices below reflect what we see on Mr-Glass custom and geometric work in Fort Lauderdale. Every job gets a written line-item quote before we start. No change orders, no surprise line items.

• Sealed unit replacement for a radius or arch window: $450-$1,200 depending on size and glass package
• Trapezoid or parallelogram frame re-square and re-glaze: $350-$800
• Full custom geometric window replacement (standard sizes up to 20 sq ft): $1,200-$2,800, impact-rated glass pushing the higher end
• Oversized custom opening (30+ sq ft) with structural shimming: $3,000-$6,000 plus the window unit
• Hardware replacement on geometric casement or awning: $180-$450 per window including parts

What moves the price: glass package (impact-rated laminated costs more than standard tempered), opening size, whether the frame is salvaged or replaced, and access difficulty on second stories or tight courtyards common in older Fort Lauderdale neighborhoods. Call (954) 280-4413 and we will give you a written quote. Estimates are free.

Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We have served South Florida since 2008 through a craft tradition that started with second-generation glazier Dale Kessler, who learned the fundamentals at McFatter Technical College in Davie and spent two decades working glass and framing along the coastal corridor from Coral Ridge to Dania Beach. We are not a franchise. We hire local, train apprentices into journeymen, and plan to be in Fort Lauderdale for another thirty years. Every Mr-Glass job carries our Done Right Promise: if it is not done right, we make it right, no paperwork, no arguing. And because we are an authorized installer for more than a dozen manufacturer lines including PGT, CGI, CWS, and ES Windows, if a Mr-Glass window is beyond saving, we can quote you a full replacement from a line built for South Florida’s hurricane cycle. A live person answers our phone around the clock. We stand behind the work in writing.

FAQs