Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Roof Repair in Fort Lauderdale: What to Know First
PGT roof repair in Fort Lauderdale typically runs between $450 and $1,850 depending on whether we’re resetting a slipped panel, replacing a damaged skylight curb, or reflashing the entire perimeter. Most PGT roof-related repairs are completed in one visit by a technician who understands the fastening schedules and sealant chemistry PGT specifies. We’re an independent PGT service provider, not a factory arm, and our pricing is written on paper before we touch the roof.
This page is for homeowners in Fort Lauderdale who own a PGT window, door, or skylight and have noticed water, sagging flashing, or a seal that no longer closes the way it did when it was installed. If that’s you, call (954) 280-4413 and you’ll get a live person, not a recording.
Key Takeaways
- We repair PGT roof penetrations including Velux-mated skylights, WinGuard fixed roof glass, and deck-mounted sliding doors.
- Fort Lauderdale’s salt air and afternoon downpours punish roof flashing faster than inland installs.
- Our quote is fixed before work starts. No change orders, no “we found rot” upcharge games.
- Every job carries the Done Right Promise in writing.
How PGT Products Fail - and How We Fix Them
PGT builds a serious impact product. Most of what we see on Fort Lauderdale roofs is not a manufacturing defect. It’s what twenty Florida summers do to the interface between the unit and the deck. Here are the failure modes we handle most on PGT roof work.
- WinGuard fixed roof glass with perimeter seal failure. The factory seal between the laminated glass pack and the aluminum frame is stout, but the butyl and silicone that marry the frame to the roof curb breaks down under UV and standing water. We see this on flat and low-slope decks in Rio Vista and Las Olas Isles. Our fix: strip the old sealant clean, reset the unit on new setting blocks, and lay a two-stage sealant joint with correct slope so water doesn’t pool against the frame.
- PGT sliding glass doors on second-story decks. The 380 and 880 series sliding doors are common on elevated lanais and rooftop decks. The weak point isn’t the door panel itself; it’s the sub-sill flashing beneath the track. Fort Lauderdale’s monsoon afternoons send water sideways, and once the sub-sill pan corrodes, water walks underneath the track and into the joist system. We pull the door, replace the sub-sill with a proper slope-to-drain pan, and reinstall.
- Roof curb rot under older PGT cladding. On homes built in the 1990s and early 2000s, the original curb was often framed with untreated dimensional lumber and wrapped in aluminum that eventually pinholes. By the time the homeowner sees a water stain on the ceiling, the curb is spongy. We rebuild the curb with pressure-treated stock, cap it with bent copper or PVC-coated aluminum, and remount the PGT unit at the correct reveal.
- Velux-mated PGT skylight flashing that has separated at the corners. PGT and Velux both make a good product, but the corner joints where flashing pieces overlap are the first place wind-driven rain finds its way in. On a re-roof, a cheap crew will sometimes reuse stretched-out flashing instead of replacing it. Our repair: new flashing kit matched to the deck profile, with corners lapped the right direction and blind-sealed.
- WinGuard casement and fixed windows mounted in raised roof monitors. We see these on elevated eyebrow roofs in Victoria Park and Colee Hammock. The sash itself is usually fine. What fails is the head flashing on the monitor wall; it was not carrying water past the window’s top flange, and condensation plus leakage started migrating down the king studs. We install a proper Z-flashing with a drip edge that sends water away from the frame, then reset the unit.
Dale Kessler grew up in Sailboat Bend resealing jalousie windows with his father, and he’ll tell you the same thing he tells every PGT owner: if a roof leak shows up near a window or door, the frame is rarely the liar. The flashing is usually the liar.
Our PGT Roof Repair Process
Here’s how a PGT roof repair job works when you call TruePane Windows & Doors in Fort Lauderdale.
- 1
The call. You reach a live person at (954) 280-4413. We ask where the leak or damage is, what you’re seeing, and whether you know the PGT model line if possible. We schedule a time that works for you.
- 2
The diagnostic visit. A uniformed, background-checked technician inspects the roof penetration, the flashing, the curb condition, and the unit’s glazing. We do not guess from the ground. We go up, get eyes on it, and pull back flashing where needed.
- 3
The parts decision on paper. If the unit needs replacement glazing or hardware, we show you the OEM option and a quality aftermarket option side by side: cost, lead time, and warranty differences written out. No surprise line items later. If it is not right on paper, it will not be right on the wall.
- 4
The repair. Flashing, curbs, sealant, hardware, or full unit reset happen the same day in most cases. We work clean, protect the roof membrane, and haul off the old materials.
- 5
The water test. Before we call the job done, we run a controlled water test on the repair area and check the interior for any sign of moisture migration. If it leaks under test, it’s not done.
- 6
The warranty paperwork. Both manufacturer warranty layers get registered in writing with durations stated before our truck leaves your driveway. Your Done Right Promise is on the invoice, in plain words.
What PGT Roof Repair Costs in Fort Lauderdale
Fort Lauderdale PGT roof repair pricing breaks down by the scope of the problem, not by the square footage of your house. Here are honest ranges based on what we see most often.
| Repair Type | Typical Range |
|---|---|
| Perimeter reseal and reflash on a single roof-mounted PGT unit | $450 - $850 |
| Sub-sill replacement under a sliding door on a deck | $900 - $1,650 |
| Roof curb rebuild with new cladding and unit reset | $1,200 - $1,850 |
| Skylight flashing replacement matched to deck profile | $500 - $950 |
| Raised monitor head flashing and reset | $700 - $1,400 |
What moves the price: roof pitch and accessibility, how far into the curb the rot has gone, whether the deck material is tile or membrane, and whether the unit needs new glazing or only new flashing. Every quote is fixed before work begins. Call (954) 280-4413 for a detailed, written estimate on your PGT repair. Estimates are free, and we’re offering a free written repair estimate right now.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for PGT Work
We’ve served local communities in Fort Lauderdale since 2008 through Dale Kessler’s craftsmanship tradition, and during that time we’ve learned that roof repairs on impact windows and doors are jobs other companies rush through or flat-out avoid because they’re awkward, hot, and detail-heavy. We take them. Our technicians measure twice, quote with both manufacturer layers registered before we leave the driveway, and stand behind every repair with the Done Right Promise. When a PGT unit is beyond repair or you want a comparison, we can quote PGT alongside CGI, CWS, ES Windows, and ECO Window Systems, so you see exactly what you’re buying. A live person answers our phone 24 hours a day, seven days a week. We’ll be there when we say.
FAQs
No, provided the repair is done correctly, which is why we follow PGT’s published fastening and sealant guidelines even though we are an independent service provider. Many failed warranty claims we see in Fort Lauderdale come from improper flashing or sealant work by crews who did not follow the manufacturer’s installation details. Registering both warranty layers in writing is part of every job we do.
Call (954) 280-4413 to have your PGT roof unit inspected, and we’ll tell you honestly whether it’s a warranty item, a repair, or both.
Yes. PGT’s frame finishes and glass tints are specific, and we match them as closely as the current product line allows. If your unit is older and the exact tint or anodized finish has been discontinued, we will show you the closest matches on paper before ordering anything. You’ll never find out a panel doesn’t match after it’s already installed.
Both. We’re transparent about what’s available and what each option costs. For structural parts like laminated glass packs and rollers on PGT sliding doors, we prefer OEM because the geometry matters. For non-structural items like sealant, setting blocks, and flashing, we choose products that meet or exceed the manufacturer’s specification. The decision is yours, and we put it in writing.
For a free estimate on your PGT roof repair, call (954) 280-4413 and ask for a line-item quote. You’ll know the number before you commit to anything.
Most Fort Lauderdale PGT roof repairs are completed in one visit, and we can typically schedule your diagnostic within a few business days. We keep common PGT-compatible glazing tabs, fasteners, and flashing profiles on our trucks, so most jobs do not need a second appointment. If a second visit is needed, we tell you on the first visit, in writing.
If the frame is sound, the curb is intact, and the glass is not compromised, repair is almost always less expensive and faster. If the frame has lost its structural bond, the glass pack is delaminating, or the curb beneath the unit is rotted to the point of failure, full replacement is the honest call. We’ll show you the evidence either way, with photos and a straight answer.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After