Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPly Gem Impact Windows & Doors in Fort Lauderdale: What to Know First
We install, repair, and replace Ply Gem impact windows and doors throughout Fort Lauderdale as an independent Ply Gem service provider. Most repair jobs are completed in one visit, and full replacement projects typically run two to five days depending on opening count. Pricing is honest and line-itemed before work begins, no surprises on the bill. If you own a Ply Gem window or door that binds, leaks, fogs, or won’t seal after a storm, this page tells you what’s actually going on. For a free estimate, call (954) 280-4413.
How Ply Gem Products Fail - and How We Fix Them
Ply Gem builds solid mid-range impact products, but South Florida humidity and salt air expose weaknesses we see repeatedly in Fort Lauderdale homes. Here are the failure patterns we diagnose most often.
- Interlocking sash misalignment on the Ply Gem 1500 and 5700 series single-hung windows. The interlock hooks at the meeting rail wear down after years of coastal grit working into the track, which causes the upper and lower sashes to separate slightly under wind load. Homeowners hear a whistle during storms and feel air moving through what looks like a closed window. The fix is not caulk. We replace the interlock hardware and realign the sash so both rails seat flush again.
- Failed roller assemblies on the Ply Gem Pro Series and 1500 sliding glass doors. These doors run on steel rollers that corrode faster in Fort Lauderdale than almost anywhere else, because salt-laden air gets into the roller housing and eats the bearings. The symptom is a door that drags, then won’t move at all without lifting the panel. We replace the rollers with stainless or high-grade aftermarket assemblies sized to the existing track, which matters because Ply Gem tracks vary slightly by year of manufacture.
- Compressed or torn weatherstripping on Ply Gem impact-rated entry doors. The factory weatherstrip Ply Gem uses breaks down under UV exposure and daily use in South Florida heat, usually inside five to seven years. Once compressed, the door loses its air seal and the deadbolt starts rubbing the strike plate. We replace the weatherstripping with marine-grade EPDM or silicone profiles cut to the exact door, then re-shim the hinges so the slab sits square in the frame.
- Fogged or hazy glass in Ply Gem impact laminated units. This is not a seal failure in the traditional sense. Ply Gem’s laminated interlayer can begin to de-laminate at the edges when the unit sits in a frame that holds water at the sill, which happens in Fort Lauderdale when weep holes get clogged with wind-blown debris and the glass sits in a puddle after every afternoon storm. The haze starts as a milky edge and creeps inward. Some cases can be dried and resealed by a glass shop with the right equipment. Most need a new insulated glass unit. We’ll tell you which one you have before we touch a screw.
- Stripped or seized balance assemblies on Ply Gem double-hung impact windows. The block-and-tackle balances Ply Gem used on earlier builds are sensitive to salt and grit. When they seize, the window won’t stay open or feels like it has sand in the track. We replace the balance pair, and if the window is old enough that the original balance is discontinued, we retrofit a compatible aftermarket balance rather than tell you to replace the whole window.
Our Ply Gem Impact Windows & Doors Process
This is how a Ply Gem job runs at TruePane, from the first call to the final inspection.
- 1
Call and schedule. A live person answers at (954) 280-4413. We set a time that works and a tech shows up when we say. Background-checked and uniformed.
- 2
Measure and diagnose. We measure every opening twice. Dale Kessler’s rule has always been: if it is not right on paper, it will not be right on the wall. We find the actual cause of the failure before recommending a fix.
- 3
Parts decision on paper. We quote OEM Ply Gem parts and quality aftermarket equivalents side by side when both exist, with the trade-offs written in plain language. You see exactly what you’re buying and what it costs.
- 4
The work. For repairs, we bring the parts with us and do the job on the first visit in most cases. For replacements, we set the new units in the existing openings with new flashing and sealant at every penetration.
- 5
Test and clean up. Every repaired or replaced unit gets operated full cycles, checked for square and seal, and the work area is cleaned before we leave.
- 6
Register the warranty. Both manufacturer warranty layers are registered in writing before the truck leaves the driveway, and the Done Right Promise stands behind the workmanship. If something is not right, we come back and make it right. No paperwork fights.
What Ply Gem Impact Windows & Doors Costs in Fort Lauderdale
Here are the ranges we quote most often in Fort Lauderdale for Ply Gem work. Every quote is a written line item, not a ballpark.
- Single-hung impact window repair (sash realignment, balance replacement, interlock repair): $185-$425 per window
- Impact glass replacement (fogged or cracked laminated unit, standard sizes): $450-$1,100 per unit depending on size and laminate build
- Sliding glass door roller and track repair (Ply Gem Pro Series, 1500): $240-$600 per door panel
- Full Ply Gem impact window replacement (mid-size opening, supplied and installed): $900-$2,200 per window
- Full Ply Gem impact sliding glass door replacement (6-foot or 8-foot panel): $3,500-$7,800 depending on size, finish, and glass package
What moves the price: opening size, whether you’re repairing factory Ply Gem parts or retrofitting quality aftermarket parts, second-story access, and whether the existing frame is still square. Storm season is also a factor in Fort Lauderdale when demand spikes. Call (954) 280-4413 for a free estimate with exact numbers for your openings. We also honor a permanent 5% discount for seniors and veterans.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for Ply Gem Work
We have served this community since 2008 through Dale Kessler’s craft tradition, not a franchise playbook. We hire local and train apprentices into journeymen. When you call at two in the morning before a storm, a live person answers. When a tech shows up at your house, that tech is background-checked and in uniform, and they will treat your home the way they would their own mother’s. We register both warranty layers in writing before the truck leaves your driveway, and the Done Right Promise means if it is not done right, we make it right. And because we’re an authorized installer for more than a dozen lines including PGT, if a Ply Gem repair is ever not the smart money, we’ll say so and show you alternatives side by side on paper. We stand behind it.
FAQs
No, not when the work is done correctly with compatible parts and documented properly. The manufacturer warranty on Ply Gem products generally covers defects in materials and workmanship under normal use, and a repair performed by an independent provider does not void that warranty unless the repair itself damages the unit or uses parts that cause a failure. We register both warranty layers in writing and keep repair documentation so you have a paper trail if you ever need to file a claim. Call (954) 280-4413 and we’ll walk you through what your specific warranty covers.
We can source both OEM Ply Gem parts and quality aftermarket parts for most active and many discontinued Ply Gem lines, including the 1500, 5700, and Pro Series. Some factory parts have long lead times from the manufacturer, and in those cases we’ll present an aftermarket option that fits correctly and meets South Florida impact requirements. You decide on paper before we order anything. For a parts availability check specific to your window or door, call (954) 280-4413.
Repair makes sense when the frame is still square, the glass is intact or replaceable, and the hardware failure is isolated. Replacement makes more sense when multiple components have failed, the frame shows signs of rot or corrosion at the sill, or the existing unit no longer meets current Florida Building Code impact requirements for your wind zone. We’ll give you a straight answer with numbers for both options, because we’re not here to sell you a replacement you don’t need.
Most repairs are scheduled within a few days, and most repair jobs are completed in a single visit because we arrive with the parts on the truck. If your Ply Gem window or door is compromised and hurricane season is bearing down, tell us when you call and we’ll prioritize it. The phone is answered by a live person 24 hours a day, 7 days a week at (954) 280-4413.
Yes. Impact window and door replacement in Fort Lauderdale requires a permit when the opening or the structural attachment changes, and we handle the permit, the inspection, and the paperwork. We’ll tell you upfront if your project needs a permit and include that cost in the written estimate. Fort Lauderdale also requires product approval numbers for the specific impact units being installed, and we verify those before any work begins.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.