Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Simonton Impact Windows & Doors in Fort Lauderdale: What to Know First
Simonton impact windows and doors in Fort Lauderdale can be repaired or replaced by our independent service team, typically within a single visit for most window issues and within one to two weeks for full replacement orders. We are an independent Simonton service provider, not a factory branch, which means we make repair decisions based on what will hold up in coastal Broward County rather than what moves inventory. If you own Simonton units and you are noticing binding, fogging, or a door that will not seat after a storm season, this page tells you what is actually going on and what it costs to fix it right. Call (954) 280-4413 when you are ready for a straight answer.
How Simonton Products Fail - and How We Fix Them
- StormBreaker Plus casement cranks that strip under load. The gear teeth inside the crank operator are zinc alloy, and after enough salt-season cycles in Fort Lauderdale, they round off. The window still looks fine from the outside, but the sash will not seal tight against the frame. That small gap is how wind-driven rain gets in during a tropical storm. We replace the operator assembly with the correct Simonton rotation pattern, not a generic casement crank from a big box shelf, and we test the seal with a feeler gauge before we call it done.
- Reflections 5500 single-hung balances that drop hard. The block-and-tackle balance inside the jamb loses tension after ten to fifteen years of daily use and humidity swings. A window that slams shut when you let go is a balance issue, and if it drops hard enough, the sash can crack at the corner welds. We measure the sash weight and install the right-rated balance, which most homeowners cannot do safely because the tensioned spring assembly can release unexpectedly. This one is worth letting a professional handle.
- Simonton sliding glass door rollers that grind and flatten. The original rollers on many Simonton sliders are steel wheels in stamped housings. Fort Lauderdale’s salt air works on them like sandpaper, and after a few years the wheel no longer rolls, it drags. You will hear it before you see it. We pull the door, clean the track, and install stainless or sealed-bearing replacement rollers that will not corrode the same way. A door that rolls easily seals better and puts less strain on the locking hardware.
- Fogged or hazed insulated glass in Simonton picture windows. This is a failed seal, plain and simple. It is not condensation you can wipe away, and it will not improve on its own. What most homeowners do not know is that Simonton’s warranty language distinguishes between the sealed glass unit and the frame components, and the coverage period is different for each. We quote both OEM replacement sashes and reglazing options on paper so you can see the cost difference and the warranty difference before you spend a dollar.
- Impact-rated entry doors with sagging or binding hinges. A Simonton impact door is heavier than a standard exterior door because of the laminated glass and reinforced frame. If the hinges were not set correctly or the rough opening has settled, the door starts to bind at the top corner and drag at the bottom. That is not a hinge-lubrication problem, although that is what most people try first. We reset the door, replace hinges where needed, and adjust the threshold so the door seats evenly against the weatherstripping.
Our Simonton Impact Windows & Doors Process
- 1
You call, a person picks up. A live person answers the phone at (954) 280-4413 every hour of every day. Not a voicemail tree, not a callback form.
- 2
We measure and diagnose on site. Every opening gets measured twice before we quote a single number. If it is not right on paper, it will not be right on the wall.
- 3
We lay out parts options in writing. OEM Simonton parts versus quality aftermarket components, with durability and warranty trade-offs stated plainly. You decide, with the facts in front of you.
- 4
The repair or replacement gets done. A background-checked, uniformed technician completes the work, most often in a single visit. We work in your home the way we would work in our own mother’s.
- 5
We register both warranty layers before the truck leaves. That is The Keystone Standard. Manufacturer coverage and our workmanship guarantee, both in writing, with durations stated and no fine print to argue about later.
- 6
If it is not done right, we make it right. Our Done Right Promise covers every Simonton job we do in Fort Lauderdale and throughout Broward County.
What Simonton Impact Windows & Doors Costs in Fort Lauderdale
Simonton repair and replacement pricing in Fort Lauderdale runs on a fairly predictable range, and we quote every job with line items so you know exactly what you are paying for. Here is what we typically see:
- Single-hung or casement window repair (hardware, balance, or seal): $225 to $480
- Impact sliding glass door roller and track restoration: $350 to $700
- Insulated glass replacement on a Simonton picture window: $400 to $900
- Full impact window replacement, per opening installed: $1,200 to $2,400
- Full impact sliding door replacement: $3,500 to $6,500
What moves the price is the size of the opening, the series you are matching, and whether we are restoring hardware or replacing the entire unit. Fort Lauderdale coastal code compliance is a factor too, and we will not shortcut it to shave a few hundred dollars off a bid. Call (954) 280-4413 for a free estimate, and you will have a written number with no surprise line items after the fact.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for Simonton Work
We have been serving local communities since 2008, and the reason homeowners keep our number is simple. All of our work is backed by a Done Right Promise, and we register both warranty layers in writing before the truck leaves the driveway. We know products well, but we are also authorized installers for more than a dozen other manufacturer lines, including, and PGT. So if a Simonton repair does not make financial sense, we can show you a side-by-side comparison with another line and let you make an informed call. We show up when we say we will, we measure twice, and we stand behind the work in writing. A square deal, every time.
FAQs
In most cases, using quality aftermarket components on a Simonton window will not void the manufacturer warranty on the frame or glass, but it can affect your specific coverage. We verify your warranty terms before we install anything, and we will tell you in writing whether OEM parts are required to preserve coverage. Call (954) 280-4413 if you want us to check your specific units, and we will do it for free.
Most Simonton impact window replacements are completed in one to two weeks from the date you approve the written estimate, depending on the series and the size of the opening. For repair work, we typically complete the job in a single visit. Call (954) 280-4413 for a free estimate, and we will give you a realistic timeline for your specific situation.
If the frame is structurally sound and the damage is limited to hardware, rollers, or a fogged glass seal, repair is usually the better financial call. If the frame is dented, corroded, or leaking, replacing the unit is the honest answer. We quote both options on paper so you never have to guess. Call (954) 280-4413 and we will measure and tell you what we would do if it were our house.
Most Simonton impact-rated products meet current Florida Building Code requirements for wind-borne debris protection, but code compliance depends on the specific series, the year it was manufactured, and the installation method. For Fort Lauderdale’s coastal wind zone, we verify product approvals and installation standards before we start any job. If you are unsure whether your existing Simonton units still meet code, call us at (954) 280-4413 and we will check the labels and approvals for you.
Yes, we can usually match the series, glass package, and frame color of your existing Simonton windows, as long as the model is still in production or available through our supplier network. Even if the exact frame profile has been discontinued, we can often source a compatible replacement or recommend a matching alternative from another manufacturer line we carry. Call (954) 280-4413 with the model information if you can find it, and we will sort it out from there.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After