Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterViewLux Windows & Doors in Delray Beach, FL | TruePane Windows & Doors
We provide independent ViewLux service across Delray Beach, from Kings Point and Century Village to the A1A corridor. We are not manufacturer-authorized, and we’re upfront about that. What we bring instead is hands-on experience with the 7700, 770, and 5500 series in Palm Beach County’s coastal high-wind zone, plus an early understanding of the HOA approval process that governs almost every ViewLux job in this city. Call (954) 280-4413 to schedule a free estimate.
Why Delray Beach Residents Choose Us for ViewLux Service
Our crew has disassembled hundreds of ViewLux units in Palm Beach County, and by now we know the frame extrusions, glazing beads, and sealant tolerances that separate a long-term fix from a callback. That matters in Delray Beach, where salt air works on aluminum year-round and a window that fails in July usually fails on a west-facing slider in a 55+ community. Dale Kessler learned the trade at McFatter Technical College and has been putting in impact-rated units along the South Florida coastal corridor for two decades. He measures twice before a truck ever leaves the driveway, and our uniformed technicians work the same way. When a ViewLux owner calls about fogged glass or a slider that’s jumping its track, we quote the repair on paper before we touch the wall.
We are also an independent ViewLux service provider. That means no factory line to hide behind and no incentive to sell you more than you need. We stock OEM ViewLux hardware and glazing beads when lead times allow, and when the factory part is discontinued, we say so plainly and offer a marine-grade alternative that holds up in Delray Beach salt air. We register both manufacturer warranty layers in writing before the truck leaves your driveway, under The Keystone Standard. And every job carries our Done Right Promise. If it’s not right, we make it right. No paperwork fights, no arguing.
Common ViewLux Windows & Doors Problems We Solve in Delray Beach
- Fogged glass on ViewLux 7700 Series horizontal sliders. Glazing bead shrinkage and corner joint seal failure are common on west-facing units in Delray Beach’s inland condo communities, where the Atlantic sits only 3 to 5 miles away. The constant salt air finds the smallest gap. We replace the failed seals, set new glazing beads, and bed the unit correctly so the fix lasts.
- Hard-to-operate ViewLux 5500 Series sliding doors. Sand grit from A1A oceanfront properties works its way into roller tracks and wears the original parts down within 8 to 12 years, leaving a panel that’s stubborn or impossible to move. We rebuild the track, install marine-grade rollers, and set the door back on a true line.
- Condensation between the panes of ViewLux 770 Series casements. On humid summer mornings in Delray Beach, a failed thermal seal shows itself as moisture trapped inside the glass. That’s not a cleaning problem. We replace the insulated glass unit and reseal the frame so the window performs like the day it was made.
- Anodized aluminum frame pitting and white oxidation. North-facing elevations within 3 miles of the ocean stay damp longer and develop that white bloom faster than any other exposure. Surface pitting can sometimes be cleaned and sealed. Deeper corrosion usually means replacement, and we’ll tell you which one you’re looking at.
- Sliders jumping the track in Kings Point and Century Village units. Original ViewLux track assemblies in 1970s and 1980s condos wear out, and the panel lifts off when an owner tries to open it. We diagnose the track wear, replace the rollers with marine-grade parts, and install new OEM weatherstripping to close the air gap around the sash.
ViewLux Service in Delray Beach: What Local Conditions Mean for Your Equipment
Delray Beach’s 55+ condominiums, Kings Point and Century Village chief among them, run on a two-track approval system that shapes every ViewLux job here. Before a Palm Beach County permit can even be pulled, the HOA architectural committee must sign off on frame color, grid pattern, and product specifications. In many of these buildings, the committee requires the new frame to match the original 1970s bronze or white anodized aluminum profile, and may mandate specific SDL grid patterns for visual consistency across the building. A contractor who orders product and pulls the county permit before getting written HOA approval risks a completed installation being rejected. The removal comes out of the contractor’s pocket. We front-load HOA paperwork for every ViewLux job in those communities, because Dale’s rule applies here more than anywhere: if it is not right on paper, it will not be right on the wall.
At Kings Point, our tech diagnosed a ViewLux 7700 Series horizontal slider with severe track wear and salt-corroded rollers. The panel was jumping the track whenever the owner tried to open it. We coordinated the HOA’s bronze-frame spec, replaced the rollers with marine-grade aftermarket parts, and installed new OEM weatherstripping to stop the air leak around the sash. Smooth operation returned without triggering a violation.
ViewLux Models & Products We Service in Delray Beach
We service the full ViewLux line relevant to Delray Beach housing stock: the 7700 Series horizontal sliders and fixed windows, the 770 Series casements and awnings, and the 5500 Series sliding doors. For each, we use OEM ViewLux hardware, weatherstripping, and glazing beads whenever lead time allows. Where the factory has discontinued parts, particularly for older 7700 and 5500 units, we install marine-grade aftermarket rollers and seals that are tested to outlast original spec in Delray Beach salt air. We recommend full replacement over repair when frame oxidation has gone deeper than surface pitting, or when the thermal seal has failed on more than one lite in the same window.
For homeowners replacing original aluminum singles with new ViewLux product, we also handle hurricane impact windows, sliding windows, and full frame replacement. As an independent provider, we quote manufacturer lines side by side on paper so you see exactly what you’re buying. Learn more about our broader ViewLux sales & service work.
ViewLux Service Pricing in Delray Beach
ViewLux service pricing in Delray Beach depends on what failed and how far gone it is. Here’s what we typically see:
- Roller and track replacement on a 5500 Series slider: $180 to $340, depending on whether rollers alone or the full track assembly needs work.
- Thermal seal repair on a 770 Series casement with fogged glass: $250 to $450 per insulated glass unit, plus resealing labor.
- Glazing bead replacement and corner joint reseal on a 7700 Series slider: $220 to $380, depending on linear footage and whether the frame needs to be cleaned and prepped first.
- Full frame replacement with new impact-rated ViewLux product: $950 to $1,900 per opening, driven by the HOA-approved frame spec, grid pattern, and whether window or door openings require structural retrofits under the Palm Beach County coastal High-Wind Zone code.
Your free estimate includes a measurement of every opening, a written line-item quote, and the HOA paperwork started on the spot. We quote fixed pricing and we hold to it. Call (954) 280-4413 for exact numbers on your ViewLux repair or replacement in Delray Beach. Estimates are free.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and also provide Viewlux in Boynton Beach, so we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ViewLux Windows & Doors in Delray Beach
No. Delray Beach falls under Palm Beach County’s coastal High-Wind Zone, which means Florida Product Approval is mandatory for new window installations. Some lower-cost products sold legally in Orlando or Tampa are non-compliant here. Standard non-impact ViewLux units do not meet the local code for new installation in Delray Beach, regardless of whether your building sits on the water or three miles inland. If you need Viewlux repair in Boca Raton or here, an independent ViewLux service provider can tell you exactly which impact-rated models meet the county’s requirements and your HOA’s spec. Call (954) 280-4413 and we’ll walk you through what’s approvable in your building.
The 7700 Series horizontal sliders dominate in the 1970s and 1980s condo developments, followed by 770 Series casements and 5500 Series sliding doors in the A1A oceanfront buildings. The 7700 sliders fail first, most often at the glazing beads and corner joint seals on west-facing elevations, where salt air concentrates and the thermal seal gives out. If you own an original-unit slider in Kings Point or Century Village and the glass is starting to fog, that’s the pattern. Call (954) 280-4413 for a service visit. We’ll tell you honestly whether it’s a repair or a replacement before you spend a dollar.
Yes. We work with HOA architectural committees in Delray Beach regularly, and we know which frame colors and grid patterns each community has approved. For Kings Point, Century Village, and similar associations requiring the original 1970s bronze or white profile, we coordinate the exact specification before product is ordered and before the Palm Beach County permit is pulled, just as we do for Viewlux service in Deerfield Beach. We front-load that paperwork on every ViewLux job in those communities so the installation doesn’t get rejected after it’s done. Your HOA approval happens first. Call (954) 280-4413 to start the approval and estimate process on the same visit.
It depends on how many lites have failed and how far the frame has oxidized. A single failed lite on a 770 Series casement can often be fixed by replacing the insulated glass unit and resealing the frame. If the thermal seal has failed on more than one lite, or if the frame shows oxidation deeper than surface pitting, replacement is the honest recommendation. We’re independent, so whether you need Viewlux in Greenacres or Delray Beach, we make that call on what’s best for the unit, not what’s best for our invoice. Call (954) 280-4413 and we’ll inspect your ViewLux windows in Delray Beach and give you a straight answer with written pricing.
Yes and no. Most 7700 Series horizontal sliders and 5500 Series sliding doors from the 1980s are still made in updated versions today, and current production can often be matched to your HOA’s frame and grid spec. But some original hardware and seal components for the earliest ViewLux units have been discontinued. When that happens, we use marine-grade aftermarket rollers and seals proven to outlast original spec in Delray Beach salt air. If your HOA requires a visual match to the original unit, replacement with a current ViewLux model is usually the cleaner path. Call (954) 280-4413 for an exact answer on your building and your unit.
Service Areas Near Delray Beach
We serve Delray Beach and the surrounding coastal and inland communities throughout Palm Beach County. Our crews regularly cross through Delray Beach service area, and we extend to nearby cities including Apollo Beach, Anna Maria, and Altoona. For homeowners in adjacent regions, we also offer ViewLux service in Deltona and ViewLux service in Doral. Wherever you are in the county, we’re glad to come take a look.
Book Your ViewLux Service in Delray Beach Today
If your ViewLux windows are fogging, dragging, or jumping the track, call us. We’ll send a background-checked, uniformed technician to your Delray Beach home, measure every opening twice, and put the quote in writing before any work begins. A live person answers the phone 24 hours a day, 7 days a week. Call (954) 280-4413 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Delray Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.