Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterBay & Bow Windows in Fort Lauderdale, FL | TruePane Windows & Doors
Bay and bow windows give Fort Lauderdale homeowners something rare: a genuine architectural statement that also stands up to hurricane season. These projecting multi-panel assemblies push outward from the wall plane, creating a shelf of interior space and a wide, panoramic view that flat windows simply can’t match. TruePane Windows & Doors has installed impact-rated bay and bow configurations across Fort Lauderdale neighborhoods from Rio Vista to Coral Ridge, and we treat every job as a structural integration, not just a window swap. If you’re considering this profile for your home, call (954) 280-4413 to schedule a free on-site measurement and project consultation.
Product Overview - Bay & Bow Windows
A bay window is a three-panel projection, typically with a large fixed center unit and two angled operable or fixed side panels. A bow window uses four or more panels arranged in a gentle arc, creating a softer curve that wraps around the wall opening. Both profiles add real, usable interior square footage - many Fort Lauderdale homeowners use the resulting ledge for a reading nook, display shelf, or dining banquette - while delivering sightlines that feel closer to a turret than a standard punched opening.
In Florida’s High-Velocity Hurricane Zone, the glazing package matters more than the geometry. TruePane supplies our bay and bow windows with laminated impact glass as the standard foundation, built around a PVB (polyvinyl butyral) interlayer that holds the glass in the frame under impact. That’s the core requirement for a product installed in Fort Lauderdale, where the building code treats every window opening as a potential breach point. We fabricate these assemblies in aluminum and vinyl frame systems, custom-sized to the rough opening, so the projection depth, panel count, and operable configuration all follow your home’s existing architecture rather than a stock catalog size.
What separates a well-built bay or bow window from a problem is the seat board, support framing, and how the unit ties back into the exterior wall. TruePane installs each assembly as a unitized system, checking the seat board, mullion joints, and perimeter anchor points before any finish trim goes on. That’s the difference between a projection that sags in five years and one that reads plumb and square for decades.
Technical Specifications
Every bay and bow window we sell in Fort Lauderdale is custom-fabricated to the measured opening. You’re not limited to a fixed set of sizes, which matters for older homes in neighborhoods like Victoria Park or Sailboat Bend where rough openings rarely match modern modular dimensions.
- Frame materials: Aluminum and vinyl, selected for coastal corrosion resistance and thermal performance
- Maximum size: Custom fabricated to the opening, with engineering review for large spans
- Glass options: Laminated Impact Glass (PVB Interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass
- Finish options: White, Almond, Bronze, Black, Tan
- Sill options: Standard Sill, Seat/Shelf Sill (the deeper interior ledge many homeowners want on bay units)
- Design pressure: Matched to your wind zone, up to +/-100 - never higher
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to FBC HVHZ requirements
Hurricane & Compliance Performance
These are the performance facts that matter when a Fort Lauderdale building official reviews your permit application. We keep the documentation accessible and specific to your exact configuration.
Laminated Impact Glass
Every bay and bow unit we install starts with laminated impact glass. The PVB interlayer holds the glass in the frame under impact, meaning a struck window doesn’t open a hole for wind and water to pressurize your home. This is the standard, not an upgrade, for hurricane-impact windows in Fort Lauderdale.
Miami-Dade NOA / Florida Product Approval
The specific NOA and Florida Product Approval numbers are issued per configuration, and we verify them on your quote. Fort Lauderdale permit offices expect this documentation, and we provide it for every assembly we sell.
FBC / HVHZ Compliance
All TruePane bay and bow windows are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. HVHZ is the strictest wind-borne debris region in the Florida code, and Fort Lauderdale sits fully inside it.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated impact products are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. Your specific configuration’s test reports are available with the project submittal package.
Design Pressure for Your Wind Zone
We match design pressures to your wind zone, up to +/-100, and we don’t overspec beyond what the engineering requires. Overbuilding adds cost without adding protection, so the number on your quote reflects your actual site conditions.
Energy Performance
Low-E insulated glass options are available for every bay and bow configuration. For a west-facing projection in Fort Lauderdale, Low-E coatings meaningfully reduce solar heat gain while preserving the wide sightlines that make these windows worth installing.
Color & Glass Options
Fort Lauderdale architecture splits between two moods: the bright white and almond coastal vernacular of Coral Ridge and Lauderdale Harbors, and the deeper bronze, tan, and black tones seen on Mediterranean revival homes in Rio Vista and Colee Hammock. We stock all five finishes - White, Almond, Bronze, Black, and Tan - so your bay or bow window matches both the exterior trim and the interior sightlines.
Glass selection follows function. Laminated impact glass is the mandatory base layer in the HVHZ. Low-E insulated glass builds on that with thermal performance - particularly useful for east-facing sunrises over the Intracoastal. Tinted glass cuts glare without changing the architectural character, and clear glass keeps the view as honest as possible, which is exactly what you want when the selling feature is the view itself. On a bow window wrapping a sunroom, combining clear impact glass on the center units with Low-E on the angled ends is a common Fort Lauderdale approach we’ve installed many times.
Installation by TruePane Windows & Doors in Fort Lauderdale
A NOA-rated bay or bow window only performs if the installation keeps it integrated with the surrounding structure. We’ve rebuilt too many poorly flashed projections in Fort Lauderdale to pretend otherwise. Our install crews follow AAMA 2400/2410 installation practice, and we use AAMA 812 low-expansion foam perimeter sealant on every opening we touch.
The process starts with a pre-install inspection. We open the interior casing and the exterior cladding far enough to see the rough opening condition, the seat board support, and any hidden water or termite damage. In coastal Fort Lauderdale neighborhoods, corroded anchors and rotted sill plates aren’t rare, and they have to be fixed before the new unit goes in. Then we set the assembly level, plumb, and square, using shims and anchor points engineered for the projection depth. A bay window carries real weight cantilevered off the wall, so the seat board and support brackets do the structural work. The perimeter gets the AAMA 812 foam seal, followed by a final water test and interior cleanup.
If your home is in an HVHZ jurisdiction - all of Fort Lauderdale is - the permit office will ask for the NOA or Florida Product Approval documentation. We provide that package as part of the quote, and we don’t install until the permit is in hand. Improper installation compromises an NOA-rated system, full stop. The product is engineered as a system, and the system includes how it’s anchored, flashed, and sealed.
Frequently Asked Questions - Bay & Bow Windows
Our bay and bow windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements, with design pressures matched to your specific wind zone, up to +/-100 and never higher. The exact number on your quote depends on your home’s location, exposure, and the configuration of the assembly. Call (954) 280-4413 for a site-specific calculation.
Because each bay and bow window is custom-fabricated to your measured opening, lead times run longer than stock single-hung or casement units. Expect fabrication to take several weeks, with precise timing confirmed when your configuration and finish selections are locked. We provide a written schedule at contract signing, not after.
Yes. Fort Lauderdale’s building department will require the NOA or Florida Product Approval documentation specific to your configuration as part of the permit package. TruePane includes that submittal package with your quote, so there’s no scramble when the permit review starts.
You can. Projection depth, panel count, operable versus fixed panels, sill type, and finish are all selected per project. The limiting factors are structural - a deeper projection needs stronger seat board support and more robust anchoring, which we engineer case by case. If you have an unusual rough opening in an older Fort Lauderdale home, custom fabrication is the normal path, not an exception.
Wash the frame and glass with mild soap and water, and keep the weep holes along the sill clear of debris. In Fort Lauderdale’s salt air, plan to rinse the exterior finish every few months, especially on aluminum frames within a mile of the ocean. The finish systems we use are built for coastal exposure, but salt buildup left in place for years will shorten the life of any coating.
Get a Quote - Bay & Bow Windows in Fort Lauderdale
If you want a bay or bow window that adds real space, opens up the view, and carries the paperwork Fort Lauderdale’s building department expects, we’re ready to walk you through it. Call (954) 280-4413 to schedule a free on-site measurement. We’ll price your exact configuration, pull the compliance documentation, and give you a written line-item quote before you commit to anything.
Written by the team at TruePane Windows & Doors, serving Fort Lauderdale, FL with hurricane-impact window and door installations.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
