Casement Windows

Casement Windows in Fort Lauderdale, FL | TruePane Windows & Doors

Casement windows are the side-hinged workhorse of coastal Florida homes. They crank outward on a smooth mechanism, and when closed, they compress against the frame with a full perimeter seal that blocks wind, rain, and the humid air that defines a Fort Lauderdale summer. We install impact-rated casements from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass across Broward County, and we’ve been doing it long enough to know that a window is only as good as its installation. If you’re replacing old single-hung or jalousie windows in a 1960s ranch in Riverside Park or a newer build in Victoria Park, call TruePane Windows & Doors at (954) 280-4413 for a free on-site measurement.

Call (954) 280-4413

Product Overview - Casement Windows

A casement window hinges at the side and opens outward with a crank, which changes the whole game in hurricane-prone construction. Unlike a sliding window that relies on overlapping tracks, a casement closes by pressing the sash into the frame. That compression action is what creates an airtight seal. In Fort Lauderdale, where sideways rain and wind-driven salt spray are just part of July, that seal is not a luxury. It’s the difference between a dry windowsill and a water stain creeping down your drywall.

We sell and install casements in two frame materials. Aluminum is the traditional choice for South Florida. It’s rigid, it holds up to salt air when properly finished, and it’s what most mid-century and modern Fort Lauderdale homes already have. Vinyl is the alternative for homeowners who want stronger thermal performance and a lower-maintenance frame. Both are available in impact-rated configurations with laminated glass that meets HVHZ standards.

The crank mechanism itself matters more than people think. A cheap operator gets wobbly after a few seasons of daily use. The casements we install use multi-point locking hardware that pulls the sash tight at multiple points along the frame, which improves both security and the wind-load rating. That’s why casements are a favorite for hard-to-reach spots, like over a kitchen sink or above a garden window in Coral Ridge, where you want ventilation without fighting a sliding sash.

Architecturally, casements suit Florida homes from the 1920s Spanish-inspired bungalows of Sailboat Bend to the clean-line modern builds popping up along Las Olas. Their narrow sightlines let in more glass area than a double-hung of the same rough opening, so you get larger views and more natural light. Combined with impact glass, that’s a strong combination for a city where the outside view is a selling point and the outside weather is a threat.

Technical Specifications

Here’s what you can configure on a casement window from TruePane Windows & Doors in Fort Lauderdale. These are the building blocks. The exact combination that fits your opening, wind zone, and design taste gets locked in when we measure.

• Frame materials: Aluminum or Vinyl. Aluminum for slim profiles and proven coastal durability. Vinyl for thermal efficiency and years of zero-paint maintenance.
• Glass options: Laminated Impact Glass with a PVB interlayer, Low-E Insulated Glass, Tinted Glass, or Clear Glass. Impact-rated laminated glass is the default for HVHZ compliance; tinted and Low-E options add heat and UV control.
• Finish colors: White, Almond, Bronze, Black, and Tan. Bronze and Black are popular on mid-century and modern homes; White and Almond dominate the coastal condo market.
• Screen options: Fixed Screen for year-round insect control, or Retractable Screen for a clean sightline when the window is closed.
• Design pressure: Matched to your specific wind zone on the Fort Lauderdale quote. Capable of testing up to +/-100, but we never specify a higher DP than your property actually requires.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration. We provide the specific numbers for the product we quote, not a generic sheet.

Hurricane & Compliance Performance

These six performance features are what separate an impact casement from a standard window. Each one addresses a specific failure point that Fort Lauderdale weather exploits.

Laminated Impact Glass

Impact casements use laminated glass with a polyvinyl butyral, or PVB, interlayer sandwiched between two panes. Under impact, the glass may crack but the interlayer holds the fragments in the frame. That’s the entire point. A broken impact window still keeps the wind and water on the outside until a replacement can be ordered, and it still protects the interior from flying debris.

Miami-Dade NOA / FL Product Approval

Every impact casement we install carries a Miami-Dade Notice of Acceptance or a Florida Product Approval number. These approvals are issued per configuration, which means the specific frame, glass, and hardware package on your quote has been tested as a system. We verify and document the applicable number for your specific window combination before permitting begins.

FBC / HVHZ Compliance

Fort Lauderdale lies within the High-Velocity Hurricane Zone defined by the Florida Building Code. Our casement windows are engineered to meet FBC HVHZ requirements for wind, impact, and water infiltration. This is not a regional recommendation. It’s the code baseline for any window replacement in the city.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 cycles wind pressure against the window to simulate storm loading, and TAS 203 tests forced-entry resistance. A casement that holds up to all three is doing its job. This is the standard framework behind the NOA numbers on your quote.

Design Pressure for Your Wind Zone

Design pressure, or DP, is a window’s resistance to wind forces and wind-driven water. Fort Lauderdale properties near the Intracoastal or the beach sit in higher wind zones than inland neighborhoods. We match the DP rating to your specific wind zone, up to +/-100, and never higher. Over-specifying a window adds cost without adding protection for your actual site conditions.

Energy Performance

Low-E coatings and insulated glass packages are available on our casement lines. Low-E reflects radiant heat before it enters the home, which reduces the workload on your AC during the nine warm months Fort Lauderdale gets every year. Tinted glass adds another layer of heat rejection for west-facing elevations. These options are chosen at the quoting stage, not added on later.

Color & Glass Options

The finish and glass choices you make on a casement window have real aesthetic consequences. A Bronze frame on a white stucco home in Colee Hammock reads very differently than a White frame on the same house, and choosing the wrong one is an expensive mistake to live with.

White and Almond remain the dominant choices for Fort Lauderdale’s coastal condo stock and traditional single-family homes. They keep sightlines light and work with almost any interior palette. Black frames have surged in popularity on modern and transitional builds, especially along the Middle River and in the newer constructions north of Sunrise Boulevard. They frame a view sharply. Bronze and Tan suit Mediterranean and Spanish-style homes, which remain common from Rio Vista to neighborhoods west of US-1.

On the glass side, clear impact laminated glass is the standard starting point. Add Low-E insulation when you’re tired of paying to cool air that the afternoon sun keeps reheating. Tinted glass works well on east-facing bedrooms and west-facing living areas where glare is a daily issue. If the window is on a south or west elevation with unobstructed exposure, mention it when you call for a quote and we’ll spec the glass package accordingly.

Installation by TruePane Windows & Doors in Fort Lauderdale

An impact casement window is only as strong as the opening it’s mounted in. The NOA rating is tested on a properly installed system. If the frame isn’t level, plumb, and square, the compression seal will not seat evenly. If the perimeter sealant fails, wind-driven rain finds the gap. Fort Lauderdale’s coastal exposure doesn’t forgive sloppy installation.

Our process starts with a pre-install inspection of the rough opening. We check the condition of the existing framing, look for rotted wood or corroded anchors, and confirm the measurements against the approved shop drawings. If we find opening damage, we address it before the new window goes in. Cutting corners here is how leaks happen.

We set every casement level, plumb, and square before anchoring, which keeps the crank hardware operating smoothly and the sash seal compressing evenly across the full perimeter. The perimeter gets AAMA 812 low-expansion foam sealant before trim or stucco work resumes, and the installation practice follows AAMA 2400 and 2410 standards for residential window installation. That’s the same practice we’d use on a beachfront condo in Fort Lauderdale’s Galt Mile or a gated community in Harbor Beach.

Permitting is part of the job in Broward County. Casement replacements in HVHZ jurisdictions require an NOA or Florida Product Approval submittal as part of the permit package. We handle the documentation, the submittal, and the inspection scheduling. Fort Lauderdale’s permit reviewers know what they’re looking for, and we’ve walked through their process enough times to submit clean documentation the first time.

Before we finish, we run a water test on the installation and verify the crank operation cycles smoothly through its full range. The cleanup is ours. The old windows, packaging, and debris leave with us. By the time you’re signing off on the installation, the window should look like it was always part of the house.

Frequently Asked Questions - Casement Windows

Get a Quote - Casement Windows in Fort Lauderdale

Replacing your windows is a significant decision, and the best starting point is a free on-site measurement. We’ll inspect your existing openings, discuss the frame material, finish, and glass package that makes sense for your home, and give you a written line-item quote. Call TruePane Windows & Doors at (954) 280-4413 to schedule your free estimate and get your project moving.

Written by the team at TruePane Windows & Doors, serving Fort Lauderdale, FL with hurricane-impact window and door installation.