Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
VLX 80 Fixed / Picture Window in Fort Lauderdale, FL | TruePane Windows & Doors
The VLX 80 Fixed / Picture Window from ViewLux is built for one thing: the largest possible pane of glass with the least visible frame. If you’re remodeling a waterfront condo in Las Olas Isles, opening up a living room in Victoria Park, or designing a new build in Rio Vista, this window is how you get floor-to-ceiling views without a mullion interrupting the sightline. TruePane Windows & Doors is an authorized ViewLux installation partner serving Fort Lauderdale, which means you get factory-spec product knowledge plus local installation that holds up to South Florida heat, humidity, and wind. Call us at (954) 280-4413 to talk through your project.
Product Overview - VLX 80 Fixed / Picture Window
The VLX 80 is what architects call a “maximally glazed” window. The aluminum frame is engineered to disappear. With a profile width of just 1.97 inches and zero visible hardware, you get a wall of glass that reads almost frameless from the inside. The fixed design means it doesn’t open, and that’s deliberate: fewer moving parts means better seals, better energy performance, and a thinner sightline.
This window makes sense wherever the view is the point. Picture windows in Fort Lauderdale are most common in living rooms facing the Intracoastal, primary bedrooms with downtown skyline views, or stair landings and hallways where natural light matters more than ventilation. Buyers pair the VLX 80 with operable units like casements or sliders, using the fixed panel as the showpiece and the operable units for airflow.
The frame is extruded aluminum with a 0.079-inch wall thickness. That’s a heavy-duty profile, which is why this window can span up to 120 inches wide. On a 10-foot opening, you’re getting one continuous sheet of glass instead of a divided-up grid. The engineering has to be right for that, and it is: the aluminum resists warping, sagging, and corrosion far better than wood or vinyl in a coastal climate like Fort Lauderdale, where salt air eats lesser materials.
What you’re buying with the VLX 80 isn’t just glass in a frame. It’s a structural component. These units are wind-load rated for local climate requirements, which matters when you’re specifying windows in a hurricane zone. You can also option them with impact-resistant laminated glass, which we’ll cover below.
Technical Specifications
Here’s the rundown on what the VLX 80 Fixed / Picture Window is made of, in plain terms:
- Frame material: Extruded aluminum with a 0.079″ wall thickness
- Profile width: 1.97 inches (slim sightline for maximum glass area)
- Maximum width: Up to 120 inches in a single fixed panel
- Glass options: Clear, Frosted, Low-E, Tempered, Laminated, Gray Tint, Black Tint
- Frame finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
- Thermal performance: Thermal break technology, NFRC-rated for energy efficiency
- Installation standard: AAMA 2400/2410 compliant; AAMA 812 low-expansion foam on all perimeter joints
- Operation: Fixed (non-operable), no visible hardware
Performance Features
Thermal Efficiency. The VLX 80 uses thermal break technology, which means the inside and outside of the aluminum frame are separated by a non-conductive material. That interruption stops heat from conducting through the metal, keeping your air conditioning inside and the Fort Lauderdale sun outside. NFRC ratings verify the performance numbers.
Acoustic Performance. Fixed windows outperform operable windows for sound control because there are no gaps or weatherstripping seams. If you’re near Federal Highway, the FLL flight path, or Las Olas nightlife, combining the VLX 80 with laminated glass cuts interior noise noticeably. We can discuss glass thickness and composition to hit your sound goals.
Airtightness & Weather Seal. Every perimeter joint gets AAMA 812 low-expansion foam sealant during installation. That foam fills the gap between the frame and the rough opening completely, eliminating air leaks that show up on energy bills and as drafts. AAMA 2400/2410 compliance means the installation follows the industry’s recognized standard.
Waterproofing. Fixed windows have fewer water intrusion points than operable windows, but only if the perimeter is sealed correctly. Our Fort Lauderdale crews flash and seal every unit so that wind-driven rain during afternoon thunderstorms doesn’t find a way in. We also perform a water test after install to verify.
Wind Resistance. These windows are wind-load rated for coastal climate requirements. That’s not optional in Fort Lauderdale. With impact-resistant laminated glass added, the VLX 80 can meet Miami-Dade and Broward County high-velocity hurricane zone requirements, depending on the opening and product approval.
Security & Hardware. There is no visible hardware, by design. That means no locks to tamper with and no mechanical points of failure. A fixed picture window is inherently harder to breach than a sash window, and adding laminated glass ups that resistance further.
Color & Glass Options
The six frame finishes give you real design range. Premium Black is the most requested finish in Fort Lauderdale right now, especially in modern and transitional homes around Sailboat Bend and Tarpon River. Pure White works on traditional Florida ranch styles and coastal cottages. Anodized Silver has a commercial, industrial edge that suits the downtown condo market. Bronze and Champagne are warmer metallics that blend with mid-century designs and older Mediterranean-style homes. Teak Wood is a wood-grain finish that gives the look of timber without any of the rot or maintenance issues in humid air.
For glass, Clear is the default for unobstructed views. Low-E is the practical upgrade for energy savings and UV protection. Frosted works in bathrooms, entry sidelights, and anywhere you want privacy without curtains. Tempered is required by code in certain locations like doors, near floors, or large panels above specific sizes. Laminated is the impact-resistant option and the one we recommend for hurricane protection and sound control. Gray Tint and Black Tint reduce glare and solar heat gain, which is helpful on west-facing walls that get the late-afternoon Fort Lauderdale sun.
Installation by TruePane Windows & Doors in Fort Lauderdale
Here’s the thing about a window that spans 10 feet of glass: it only performs as well as it’s installed. A VLX 80 that’s installed out of square will bind, leak, and eventually fail. And the manufacturer warranty doesn’t cover bad installation.
Our Fort Lauderdale installation process starts with a pre-installation inspection. We measure the existing opening, check the rough opening condition, and identify any structural issues before we ever order glass. We order the unit to the exact opening dimensions, not the other way around.
On install day, we remove the old window, prep the opening, and set the VLX 80 level, plumb, and square. Level means the unit sits perfectly horizontal. Plumb means it’s perfectly vertical. Square means the corners are true 90 degrees. If any of those three are off, a fixed window of this size will show it. Our crews use laser levels on every install, no exceptions.
Around the perimeter, we apply AAMA 812 low-expansion foam sealant. That’s the spec the window industry uses for sealing frame-to-opening joints. It expands to fill the gap completely, then we trim and flash the exterior. The installation follows AAMA 2400/2410 standards, which govern proper window installation methods. After the window is set and sealed, we do a water test with a controlled spray and check the interior for any sign of moisture.
Fort Lauderdale throws two things at windows: heat and water. Our afternoons bring thunderstorms that dump rain fast, and our coastal location means salt in the air. The aluminum frame handles salt. The install handles water. And if you’ve opted for impact glass, you’ve just added real storm protection to the equation.
One thing worth being direct about: a window this size is heavy. Some units weigh several hundred pounds. This is not a one-person DIY job, and it’s not something you want an inexperienced crew learning on. We’ve installed VLX 80s across Broward County, from high-rise condo units in Galt Ocean Mile to single-family homes in Coral Ridge and Poinsettia Heights. We know what these windows need.
Frequently Asked Questions - VLX 80 Fixed / Picture Window
Lead time generally runs 4 to 6 weeks from final measurement confirmation, depending on the glass package and finish you select. Custom sizes, impact-rated laminated glass, and less common finishes like Teak Wood can extend that. We recommend starting the process at least two months before you want the window installed. Call (954) 280-4413 to get your project on our schedule.
The VLX 80 with Low-E glass typically meets or exceeds the energy efficiency criteria for federal tax credits, provided the unit carries the appropriate NFRC ratings. Exact qualification depends on the specific glass package and whether this unit’s rating meets the current efficiency thresholds when purchased. We can provide the NFRC documentation with your quote so your tax professional can verify eligibility.
The VLX 80 carries the manufacturer warranty from ViewLux covering the frame and glass against defects in materials and workmanship, and our installation carries a workmanship warranty as well. The specific coverage terms depend on your finish and glass choices, and we’ll detail those in writing on your quote. What’s important is that the manufacturer warranty is only intact if the window is installed per AAMA standards, which is exactly how TruePane installs every unit in Fort Lauderdale.
Yes. The VLX 80 is manufactured to your exact opening dimensions up to 120 inches wide. We don’t stock pre-made units and force them into your rough opening. Every window we sell in Fort Lauderdale is built after we take a physical measurement of your opening, so you get a true custom fit, not an adapted stock size.
Aluminum frames need very little maintenance, but salt air does require occasional attention. Wipe the frames with a mild soap and water solution every few months, and rinse the glass thoroughly. Avoid abrasive cleaners or pressure washing at close range, which can damage the paint finish over time. The weep system stays clear on a fixed window as long as debris isn’t allowed to build up against the sill outside. In coastal areas like Fort Lauderdale, we recommend this cleaning every two to three months.
Get a Quote - VLX 80 Fixed / Picture Window in Fort Lauderdale
If you’re ready to spec the VLX 80 for your project, we make it straightforward. Call TruePane Windows & Doors at (954) 280-4413 to request a free quote, or ask about scheduling a free on-site measurement. We’ll walk your property, confirm your opening dimensions, review glass and finish options with you, and deliver a written, line-item price for the exact window you’re buying. No obligation, no pressure – just the right window, quoted correctly, installed properly.
Written by the team at TruePane Windows & Doors, serving Fort Lauderdale, FL as an authorized ViewLux installation partner.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images



Before
After
Before
After
Before
After