Geometric & Shaped Windows

Geometric & Shaped Windows in Fort Lauderdale, FL | TruePane Windows & Doors

Geometric and shaped windows give a home its signature. The half-round over the entry, the octagon anchoring a gable, the triangle following a vaulted ceiling. In Fort Lauderdale, those architectural moments have to do more than look right. They have to hold against hurricane-force wind and flying debris. TruePane Windows & Doors fabricates triangular, hexagonal, octagonal, and curved impact-glass configurations custom-fit to your opening, then installs them to Florida Building Code High-Velocity Hurricane Zone standards. We’ve been doing this work across Fort Lauderdale, from Las Olas Isles to Coral Ridge, long enough to know that a shaped window is only as good as the hands that set it. Call (954) 280-4413 to talk through your project.

Call (954) 280-4413

Product Overview - Geometric & Shaped Windows

A shaped window is not a stock item you pull off a shelf. Every triangle, hexagon, octagon, and radius curve starts from a field measurement of your actual opening, then moves into custom fabrication. The frame profile is bent or welded to follow the exact geometry, and the laminated impact glass is cut to match. That matters in Fort Lauderdale because an eighth-inch discrepancy at the sill translates into a weak point at the frame, and a weak point is where wind-driven rain finds its way in.

We specify these windows in aluminum and vinyl frames. Aluminum suits the clean, narrow sightlines of mid-century and contemporary homes you find along the canals in Rio Vista and Victoria Park. Vinyl fits the Mediterranean and coastal styles common in Coral Ridge and Imperial Point, where a wider frame profile reads as intentional and substantial. Both materials accept the same impact glazing and both are engineered to meet Miami-Dade NOA standards when configured correctly.

The appeal is honest. Homeowners want the architectural detail that a rectangular window cannot deliver. A half-round above a front door, a trapezoid filling the space under a stair landing, a circle in a powder room. In Fort Lauderdale’s wind zone, those shapes used to mean compromise. Either you accepted non-impact glass and added shutters, or you skipped the shape entirely. Neither is acceptable now. We fabricate the shape you drew, in impact glass, tested and approved for the wind pressures your specific location demands.

Technical Specifications

Here is how the Geometric & Shaped Windows Impact Series is configured. We keep this straightforward because the details matter when you are comparing quotes.

• Frame materials: Aluminum or vinyl, custom-bent or welded to your exact opening geometry
• Maximum size: Custom fabricated to order; no stock-size limitation
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
• Finish options: White, almond, bronze, black, tan
• Design pressure: Matched to your wind zone, up to +/-100, never higher
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to Florida Building Code HVHZ requirements
• Testing protocol family: TAS 201, TAS 202, TAS 203

Every configuration receives its own approval documentation. When we quote your shaped window, we list the exact NOA or FL Product Approval number that applies to that specific size, shape, glass package, and frame material. You will know what you are buying before you sign.

Hurricane & Compliance Performance

Laminated Impact Glass
The glass assembly uses a PVB (polyvinyl butyral) interlayer sandwiched between two panes. When debris strikes, the glass may crack, but the interlayer holds the shards in the frame, keeping the building envelope intact. That is the core protection for Fort Lauderdale homes in a storm.

Miami-Dade NOA / Florida Product Approval
Each shaped configuration carries its own Miami-Dade Notice of Acceptance and Florida Product Approval number. These are issued per configuration, not blanket certifications, which is why we verify the exact numbers on your specific quote before ordering.

FBC / HVHZ Compliance
Fort Lauderdale sits inside the High-Velocity Hurricane Zone. These windows are engineered to Florida Building Code HVHZ requirements, which govern every component: frame, glass, hardware, and the anchoring system that ties the window to your structure.

TAS 201 / 202 / 203 Testing Context
TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. That is the protocol family HVHZ-rated products are tested under, and it is the standard that governs what we install in Fort Lauderdale.

Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. We do not over-spec to inflate a price, and we do not under-spec to win a bid. Your window gets the rating your exact street address requires, calculated from your specific exposure.

Energy Performance
Low-E and insulated glass options are available across the shaped configurations. For east- and west-facing openings in Fort Lauderdale, a Low-E coating reduces solar heat gain without changing the look of the window. We will walk you through the glass package that fits your orientation.

Color & Glass Options

The finish decision usually comes down to what your home already says. White frames read crisp against the pastel stucco common in Sailboat Bend and Tarpon River. Bronze and black frames suit the modern builds going up along the New River and the darker trim palettes in Shady Banks. Almond and tan work well on the Mediterranean and Spanish-style homes throughout Fort Lauderdale, where a softer frame color lets the stucco and tile carry the visual weight.

On the glass side, clear laminated impact glass preserves sightlines and lets maximum light through a shape that is already doing architectural work. Tinted glass cuts glare, which matters for shaped windows placed high in a gable where the South Florida sun hits directly. Low-E insulated glass adds thermal performance, and for a shaped window over a foyer or stairwell, that means less heat build-up and more consistent indoor comfort. We order each glass package from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines, fabricating to the shape your opening demands.

Installation by TruePane Windows & Doors in Fort Lauderdale

A shaped window that is perfectly fabricated but poorly installed will fail at the perimeter. The NOA rating assumes a correct installation. That assumption only holds when the installer knows what they are doing. We do.

Every installation starts with a pre-install inspection of the opening. We check the rough opening dimensions against the fabrication order, look for rot or compromised framing, and confirm the substrate can handle the anchoring system specified for your wind zone. Then we set the window level, plumb, and square. On a triangle or a radius curve, that discipline matters more than on a rectangle, because the frame has less tolerance for being twisted into place.

We install per AAMA 2400 and 2410 standard practice. The perimeter gets an AAMA 812 low-expansion foam sealant, followed by exterior flashing and sealant. Every window gets a water test before we consider the job done. Cleanup happens the same day; the opening is weather-protected before we leave.

Fort Lauderdale adds its own layers. Coastal exposure means salt air, which influences fastener and sealant selection. HVHZ permitting means the window package must carry current NOA or FL Product Approval documentation that matches what is being installed. We handle that paperwork as part of the installation process, and we make sure the product you approved is the product that goes into your wall. Improper installation compromises the NOA-rated system, and in a hurricane, the difference between a dry home and a damaged one is often the installer’s attention to the perimeter seal. That is not a corner we cut.

Frequently Asked Questions - Geometric & Shaped Windows

What wind zone or design pressure is the Geometric & Shaped Windows rated for?
Design pressures are matched to your wind zone, up to +/-100, never higher. Your specific rating depends on your street address, exposure category, and the size and shape of the window. We calculate that for you at the quote stage, and the NOA or FL Product Approval number on your quote reflects that exact configuration.

What is the lead time for a custom shaped window?
Most geometric and shaped configurations run six to eight weeks from approved shop drawings to delivery in Fort Lauderdale. Complex radius work or specialty glass packages can add time. We confirm a firm schedule when you place the order, and we coordinate the installation date before the window leaves the factory. Call (954) 280-4413 and we will give you a realistic timeline for your specific shape.

Does a shaped window require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes. Fort Lauderdale is in an HVHZ jurisdiction, and the permitting office will ask for approval documentation on every window in the package. We provide the applicable NOA or Florida Product Approval numbers for your specific configuration and handle the submittal as part of our installation process.

Can I customize the size or configuration?
Yes. Every geometric and shaped window we sell in Fort Lauderdale is custom fabricated to your opening. You can specify the shape, the dimensions, the frame material, the finish color, and the glass package. There is no stock-size limitation. The only constraint is physics and code, and we will tell you early if a design you have in mind runs into either.

How do I maintain the frame?
Rinse the frame with fresh water every few months to clear salt spray, especially if you are near the Intracoastal or the beach. Check the weep holes at the sill to make sure they are clear, and inspect the perimeter sealant annually. If you see cracking or separation, call us before the next hurricane season. Small maintenance now avoids a water intrusion problem later.

Get a Quote - Geometric & Shaped Windows in Fort Lauderdale

If you are planning a shaped window in Fort Lauderdale, start with the measurement. Call TruePane Windows & Doors at (954) 280-4413 to schedule a free on-site measurement and get a written, line-item quote with the exact NOA or Florida Product Approval number for your configuration.

Written by the team at TruePane Windows & Doors, serving Fort Lauderdale, FL.