Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Greenacres
Custom windows and doors in Greenacres come down to one hard fact: most of the homes here were built in the 1970s and 1980s with jalousie windows and single-pane aluminum sliders that no stock replacement frame will fit without modification. If you’re reading this, you’ve probably already discovered that. The good news is that a true custom-sized impact window solves the problem permanently, and that’s the work we do every week in Greenacres. Call (954) 280-4413 and we’ll measure your openings, walk you through what works, and give you a written quote with the price fixed before anything gets ordered.
Key Takeaways:
- Greenacres homes built in the 1960s-1980s have jalousie-sized masonry openings 2-4 inches narrower than modern stock frames
- Custom impact windows typically run $900-$2,400 per opening in Greenacres, depending on size and glazing spec
- Lead times on custom architectural grilles and oversized panels run 6-8 weeks, not the 2-3 weeks of stock units
- Impact-rated openings qualify for Citizens wind-mitigation premium credits, which often offset a meaningful portion of the project cost
- TruePane registers both manufacturer warranty layers in writing before the truck leaves your driveway
Why TruePane Windows & Doors Is Greenacres’s Preferred Custom Windows & Doors Company
We’ve been in enough Greenacres homes to know exactly what we’re going to find before we walk through the door: original jalousie cutouts in the bathrooms and laundry room, a corroded 6/0 aluminum slider on the back wall, and window sills that have been baking under the west sun for forty years. That’s the housing stock here, and a company that only installs factory stock frames is going to leave you with either a compromised fit or a surprise reframing bill. We don’t do that. Our Custom Windows & Doors team measures every rough opening twice, then quotes you a unit that fits the masonry as it actually is, not as the catalog assumes.
Greenacres homeowners tend to be practical people. They want the number in writing before the work starts, and they want to know the warranty won’t vanish if the company does. We put both in writing. Every job carries our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, no arguing later. That’s how Dale Kessler has run this company since 2008, and it’s why the phone number on your quote is answered by a live person 24 hours a day, seven days a week.
Our Custom Windows & Doors Services in Greenacres
Custom Shape Windows
Every custom shape starts the same way in Greenacres: we check the masonry rough opening. A designer can specify a beautiful arch or trapezoid, but if the jalousie cutout behind the drywall is 2 inches too narrow, the job either gets a reframe or the design has to change. We catch that before the order is placed. From radius tops to clipped corners to full custom trapezoids, the unit is fabricated to the opening and the impact rating is preserved throughout.
Architectural Grilles & SDLs
Simulated divided lites and architectural grilles are where we see the most scheduling mistakes in Greenacres. Homeowners get told the labor is available next week, but nobody mentions that custom grille patterns carry a 6-8 week production lead time. We state the lead time up front, in the quote. If you want true divided lite bars in a specific profile to match a 1970s split-level’s original aluminum look, we’ll order it correctly and tell you exactly when it arrives.
Oversized Glass Panels
Oversized panels for fixed picture windows, sidelights, and full-height sliding walls need to be specified in Greenacres with the right Solar Heat Gain Coefficient. West-facing walls here take brutal afternoon sun, and we’ve seen argon-filled low-E units ordered with the wrong SHGC because somebody in an office in another state picked a default spec. We select the glass for Palm Beach County’s actual conditions. The panel gets sized to the opening, specified for wind load, and delivered as one piece, not spliced.
Commercial Storefront Glazing & Curtain Wall Systems
Small commercial storefronts along Lake Worth Road and Military Trail in Greenacres often need storefront glazing that meets current wind-load code without gutting the existing framing. We handle that work directly, including curtain wall systems for multi-unit storefronts. For commercial work, we coordinate with the engineer of record on the FBC wind-load calcs, so the permit package doesn’t stall at review.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greenacres
We’re an authorized installer for more than a dozen manufacturer lines, and for Greenacres homes we draw most often on three: ViewLux for custom-sized impact windows because their fusion-welded frames hold tight tolerances on jalousie-converted openings; ES Windows for oversized panels and architectural finishes; and Andersen when the customer wants a national brand with a long dealer warranty history. We stock common replacement parts locally and quote manufacturer lines side by side on paper, so you see exactly what you’re buying before you sign anything.
Common Custom Windows & Doors Problems We See in Greenacres Homes
- Jalousie openings that won’t accept stock frames. The masonry rough opening in a 1970s Greenacres bathroom is typically 2-4 inches narrower than any modern stock window. A big-box installer quotes a standard unit, then discovers the problem on install day and either reframes at extra cost or stuffs the gap with trim. We measure for that before quoting.
- Fogged or failed insulated glass units. The daily summer humidity and intense afternoon sun in Greenacres cycles glass seals through constant expansion and contraction. Once argon fill escapes, the unit fogs permanently. We replace the IGU and register the manufacturer warranty, rather than telling you it’ll clear up.
- Oxidized aluminum frames and corroded slider tracks. Original single-pane aluminum frames on Greenacres CBS homes corrode from decades of salt-tinged humidity. Sliders bind, frames pit, and the finish fails. We replace with impact-rated frames that carry documented coatings for coastal-adjacent conditions.
- Wrong glazing spec on west-facing walls. A low-E unit with the wrong SHGC on a west-facing Greenacres wall still lets the room overheat every afternoon. The homeowner blames the glass. The real cause is the spec. We order glass by orientation, not by default.
Pricing for Custom Windows & Doors in Greenacres, FL
A typical custom impact window in Greenacres runs $900-$2,400 per opening, installed. Custom shape windows trend higher: $1,500-$4,000 depending on radius work, frame material, and impact rating. Oversized glass panels run $1,800-$5,500 per panel for fixed picture windows and full-height applications. Architectural grilles and SDLs add $150-$600 per window depending on profile and whether you choose simulated or true divided lite. Door systems, including custom sliding and multi-panel doors, run $3,000-$12,000 and up for large openings with impact-rated glass. The price is fixed in writing before we order anything. Call (954) 280-4413 for a free estimate with line-item pricing on paper.
We Also Serve Cities Near Greenacres
TruePane serves all of Greenacres and the surrounding communities. If you’re in West Palm Beach, Wellington, Boynton Beach, or Palm Beach, the same crew and the same written warranty apply. We schedule work across Palm Beach County daily, and dispatch is coordinated from our South Florida office.
Serving Greenacres, FL - Our Local Coverage Area
We’re based in the Greenacres area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Greenacres
No. Jalousie windows cannot be retrofitted to meet any level of hurricane compliance. The louvers, the frame, and the anchoring into the masonry all fail wind-load requirements regardless of what glass or film you put on them. The only path to impact protection and insurance wind-mitigation credit is full replacement with an impact-rated unit sized to the existing opening or a properly modified one. Call (954) 280-4413 for a site measurement and we’ll show you what the retrofit would cost versus replacement.
Because the unit is fabricated to your specific rough opening dimensions and custom glazing spec, not pulled from a warehouse. Most jalousie-converted openings in Greenacres are non-standard, which means a production slot, not a shelf pick. Custom architectural grilles and oversized panels add another 4-6 weeks on top of the base 4-6 week fabrication window. The calendar is the calendar. We give you the real lead time in the quote and we don’t soften it.
You’ll see condensation between the glass panes that won’t wipe off, or a hazy film that comes and goes with temperature change. In Greenacres, the first sign is usually fogging on the west-facing windows after a humid afternoon. The fix is replacing the IGU, not the whole frame, provided the frame is still structurally sound. We’ll test the unit and tell you whether replacement is covered under the existing manufacturer warranty.
Yes, provided the unit carries the proper NOA or FBC product approval for impact, is installed per the manufacturer’s anchoring schedule, and the opening is properly documented. The shape doesn’t disqualify it. What matters is that the product approval number is on the paperwork and the installation matches the tested assembly. We provide that documentation to your insurer as part of the job.
Ordering the window before measuring the masonry rough opening. A standard frame will not fit a jalousie cutout without modification, and you won’t know that until the old window is out. Then you’re either paying for a reframe or living with a window that was forced into a hole it doesn’t belong in. We measure every opening twice before anything gets ordered, and the quote is based on the actual masonry, not the catalog.
Contact TruePane Windows & Doors in Greenacres
If you’re ready to replace jalousie windows, upgrade to impact-rated custom glass, or fix a failed unit, call (954) 280-4413. We’ll schedule a measurement, walk you through what works on your home, and give you a written quote with the price fixed in writing before anything gets ordered. No paperwork fights, no surprise line items. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Greenacres and Palm Beach County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.