Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Longwood
Custom windows and doors in Longwood, FL carry a set of rules most homeowners don’t discover until a permit gets flagged or a stock unit won’t fit an opening. If you live inside the National Register-listed Historic District, or on acreage off Wekiva Springs Road where the county, not the city, signs off on setbacks, the path from quote to signed permit looks different than it does in Lake Mary or Altamonte Springs. TruePane Windows & Doors works in Longwood every week, and our crews know which projects need Florida SHPO review, which need Florida Product Approval documentation, and which need a custom-milled profile just to keep the house looking the way it has for a hundred years. If you’re planning a project, call (954) 280-4413 and we’ll walk the property with you before you order anything.
Key Takeaways:
- Longwood’s Historic District triggers Florida SHPO review for window and door changes, and stock units often won’t pass sightline requirements.
- Acreage properties on septic and well need setback checks before any oversized glass panel or door wall gets ordered.
- Every replacement in Longwood requires Florida Product Approval documentation, regardless of whether the lot is city or county jurisdiction.
- TruePane registers both warranty layers in writing before the truck leaves, and backs every job with the Done Right Promise.
Why TruePane Windows & Doors Is Longwood’s Preferred Custom Windows & Doors Company
Longwood homeowners tend to notice two things about the way we work. First, we don’t quote a window without measuring the opening twice and checking the wall framing behind it. Second, when a project sits in the Historic District or on a county-permitted acreage lot, we don’t act surprised by the extra paperwork. We’ve been through the Longwood review process enough times to know which details get scrutinized: mullion width, true divided light profiles, the casing reveal, and whether the glass package still meets code when the visible profile stays narrow. That local knowledge is part of why homeowners call us after another bid fizzled out at the permit desk.
Our work in Longwood spans the full range: 1870s wood-frame houses in the Historic District where every sash has to be matched, 1970s concrete-block ranch homes along SR 434 with original aluminum sliders that fog in the humidity, and newer estate builds east of I-4 where owners want oversized glass panels and architectural grilles that hold up to Seminole County’s rain and thermal swings. The one thing every Longwood job shares is this: we put the warranty terms on paper before we start, and we stand behind the work with a Done Right Promise. If it’s not done right, we make it right. No paperwork fight.
Our Custom Windows & Doors team is led by Dale Kessler, a second-generation glazier who founded TruePane in 2008 and still keeps the company’s founding rule on the whiteboard: if the pane is not true, the job is not done. Our technicians are background-checked and uniformed, and they work in your Longwood home the way they’d work in their own mother’s. Dispatch and scheduling are coordinated from our South Florida metro office; crews serve Longwood locally and a live person answers the phone 24 hours a day, 7 days a week.
Our Custom Windows & Doors Services in Longwood
Custom Shape Windows
Longwood’s older homes have arches, hexagons, quarter-rounds, and eyebrow windows that no stock catalog covers. When a homeowner calls us about a leaking arch window in the Historic District or a sunroom with a non-standard trapezoid over by the Wekiva River, the first step is a field measurement of the exact radius and glass curve. We order the IG unit to match, not the nearest “close enough” size. In a climate with 50+ inches of annual rainfall, a custom shape that’s out of square by a quarter inch will leak within a season. We measure twice because that’s the only way a custom shape seals right.
Architectural Grilles & SDLs
This is where Longwood’s Historic District separates contractors who actually know preservation work from those who wing it. Simulated divided lites, or SDLs, sit inside the glass or on the surface, but true divided lights are separate pieces of glass set into individual muntins. The Longwood review board can tell the difference from the curb. We match existing muntin width and casing profile, and when a 1910 Craftsman bungalow needs a narrow-rail sash, we order it custom-milled rather than putting a chunky modern profile into a wall that was never designed for one. For newer homes, grilles and SDLs let a 1970s block house on a quiet Lake Mary-adjacent street get the traditional look without losing the energy performance of a modern low-E unit.
Oversized Glass Panels
On Longwood acreage, oversized glass panels are a signature move: a 12-foot fixed pane facing the back pasture, a corner window wall at the end of a hallway, a big fixed panel over the kitchen sink in a custom home off Markham Woods Road. But Seminole County permitting treats these openings as structural and rated components. Every panel has to carry Florida Product Approval documentation, and the header above the opening has to be sized for the load the panel can’t carry. We scope the framing before we quote, because a panel that fits the rough opening but not the structural reality is a panel that fails inspection. In Longwood, we regularly see owners who ordered glass online, got a permit rejection, and called us to fix the mess. It’s faster and cheaper to get the framing answer before the glass is cut.
Commercial Storefront Glazing
For Longwood storefronts along the 434 corridor and the small commercial pockets near the historic downtown, storefront glazing is about durability, security, and meeting Florida’s wind and impact requirements. We replace cracked plate glass, upgrade aging aluminum storefront framing, and install rated doors that meet current code. A storefront window that fails in a Seminole County summer downpour isn’t just a nuisance; it’s water coming through the display area and into the drywall. Our Longwood commercial clients get the same written warranty registration and the same Done Right Promise as our residential work.
Curtain Wall Systems
Larger Longwood commercial and mixed-use projects need curtain wall systems, and those projects live or die on proper engineering. Every mullion, anchor, and expansion joint matters here because humidity and thermal movement are constant. We install curtain wall that meets Florida Product Approval and wind-load requirements for Seminole County, and we don’t cut corners on anchor spacing or sealant joint design. The failures we see in Longwood are almost always installation shortcuts: anchors left too far apart, expansion joints missed, sealant joints too thin to survive the thermal cycling. We’d rather do the job once and register the warranty.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Longwood
We’re an authorized installer for more than a dozen manufacturer lines, and for Longwood customers that means access to ES Windows, among others, without the runaround of a showroom that carries two. Each line has a different strength: ES Windows for large architectural openings with clean sightlines, ViewLux for value-driven custom sizing, Andersen for name recognition and a deep parts catalog. When a Longwood homeowner is deciding, we quote the manufacturer lines side by side on paper so they see the glass package, frame material, U-factor, and warranty duration for each. Then we register both warranty layers in writing before the truck leaves the driveway. That’s the Keystone Standard, and we apply it on every job no matter the brand.
Common Custom Windows & Doors Problems We See in Longwood Homes
- Historic District red tags on stock replacements. The Longwood Historic District review process rejects modern replacement sashes when the mullion width or true-divided-light profile doesn’t match the original. A homeowner orders a standard double-hung from a big-box store, the permit gets flagged, and the unit sits in the garage while the opening stays boarded up. Matching the original profile before ordering prevents this.
- Fogged dual-pane seals from Longwood’s humidity and thermal cycling. Fifty-plus inches of rain a year and hot sun that’s brutal on aluminum and IG seals mean fogged glass and failed weatherstripping are routine service calls in Longwood. The aluminum frames on 1970s-to-1990s block homes along SR 434 oxidize badly in this climate, and once the frame pits, the seal follows.
- Acreage-building setbacks that shift an opening after the glass is ordered. On large lots where the county has jurisdiction, well and septic setbacks sometimes force a window wall or door assembly to move from one elevation to another. The new opening lands in a wall with no header, and a custom unit that cost two months to fabricate no longer fits. We check setbacks before we finalize the order.
- Oversized panels ordered without Florida Product Approval paperwork. Longwood is inland, so a homeowner assumes the Miami-Dade rules don’t apply. They do, at least partially: every replacement window and door in Seminole County, including Longwood, has to have Florida Product Approval documentation. Panels ordered from an out-of-state supplier without those numbers get a permit rejection and a boarded-up opening through rainy season.
Pricing for Custom Windows & Doors in Longwood, FL
A custom double-hung built for a Longwood Historic District home typically runs $1,800 to $3,400 per opening, depending on whether we’re doing true divided lights, custom-milled sash, or just an SDL grille package. For standard custom windows on a 1970s block home, figure $900 to $1,600 per opening. Oversized glass panels with structural headers and Florida Product Approval run $4,000 to $12,000 per opening in Longwood, and a full curtain wall or storefront project starts around $15,000 and goes up from there. Architectural grilles and SDLs add $150 to $400 per window depending on profile width and whether the grilles are internal or exterior-mounted. Historic District review, county permitting on acreage, and structural modifications to the rough opening are the three things that shift a Longwood quote the most. We scope all of it before we give you a price, and the estimate is free. Call (954) 280-4413 and we’ll bring a tape measure, not a sales pitch.
| Longwood Project Type | Typical Range |
|---|---|
| Custom double-hung, Historic District (true divided lights) | $1,800 - $3,400 per opening |
| Standard custom replacement window (block home) | $900 - $1,600 per opening |
| Oversized glass panel with structural header | $4,000 - $12,000 per opening |
| Architectural grilles & SDLs (add-on) | $150 - $400 per window |
| Commercial storefront or curtain wall | $15,000+ per project |
We stand behind every Longwood number we put on paper. Fixed pricing means the quote we write is the price you pay, no change orders for things we should have caught at the walkthrough.
We Also Serve Cities Near Longwood
Aside from Longwood, our crews regularly run custom window and door projects in Lake Mary, Altamonte Springs, Casselberry, and Winter Springs. If you’re in a neighboring city and the same historic or acreage questions apply, call (954) 280-4413. The job walks through the same Keystone Standard regardless of the city on the permit.
Serving Longwood, FL - Our Local Coverage Area
We’re based in the Longwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Longwood
Check the Seminole County or City of Longwood historic overlay map against your parcel number, or call us and we’ll check the boundary while you’re on the phone. If your Longwood home sits inside the National Register-listed district, any window or door replacement visible from the street is likely to trigger Florida State Historic Preservation Office review. That means the new units have to match the original mullion profiles, casing details, and often the true-divided-light look, which typically means custom-milled sash rather than an off-the-shelf double-hung. We’ve scoped enough Longwood historic homes to know what passes and what gets sent back. Call (954) 280-4413 and we’ll tell you honestly whether your project is in the review zone before you spend a dime.
A standard replacement double-hung has wider stiles and rails, a different sash profile, and often a different glass reveal than the original 1920s or 1870s unit. A custom double-hung for a Longwood historic home is milled to match the original narrow-rail profile, with muntin widths and casing details that keep the house looking right from the sidewalk. We recently scoped a 1920s Craftsman in the Historic District where the original sashes had rotted jambs and glass thin enough that you could hear every car on SR 434. We matched the narrow-rail profile with custom-milled sash and true divided lights, then used low-E glass with argon fill to hit a modern U-factor without changing the sightlines. The county historic board signed off in one review because our measurements and sample profiles were already on file before the permit was pulled.
On Longwood acreage, county-required setbacks from a septic drain field or well can push a planned window wall or door to a different elevation, and that changes framing, header work, and sometimes the glass order entirely. A 12-foot glass panel that was quoted for one wall doesn’t just shift to another wall for free; the new wall may need a structural header added, and the opening detail changes with it. We check the septic and well plans before we price the job, so the quote reflects the actual opening position, not a best guess. That’s why our quotes on Longwood acreage take a little longer to prepare, but the price you get is the price you’ll pay. Call (954) 280-4413 with your parcel number and we’ll start the setback check that day.
Fogging between the panes means the IG seal has failed, and Longwood’s humidity plus thermal cycling kills those seals faster than in drier climates. The aluminum frames from the 1970s to 1990s also oxidize, and once the frame pitts and deforms, even a new IG unit won’t seat or seal correctly. A custom replacement window with a thermally broken frame, fresh dual-pane low-E glass with argon, and properly done perimeter sealing fixes the fogging at the root instead of just replacing the glass inside a failing frame. On Longwood block homes we often replace the entire unit rather than doing a pocket glass swap, because the frames are usually shot by the time the seals fail. For an exact number on your house, call (954) 280-4413. The estimate is free.
Usually yes, but it depends on the span, the wall’s existing lintel or header, and whether the opening has enough shear capacity left after you cut it wider. A 1970s Longwood concrete-block house has different removal limits than a wood-frame historic home; you can cut a wider opening, but you’ll likely need a new engineered header, possibly a steel plate above the opening, and a structural evaluation of the wall before the permit gets approved. We scope the framing on the first visit, quote the header work as a line item, and pull the Seminole County permit with our own drawings. A custom oversized door in one of those block ranch homes off SR 434 is absolutely doable; it just needs the wall modified correctly before the unit goes in, and we do that work in-house. Call (954) 280-4413 and we’ll take a look.
Ready To Talk Windows and Doors in Longwood?
Whether you’re in the Historic District matching 1870s mullions, on acreage west of I-4 mapping out a glass wall, or in a 1980s block home that needs every aluminum frame replaced, we’ll measure, quote, and stand behind the work. Dale Kessler built TruePane on a simple rule: if the pane is not true, the job is not done. We print the warranty terms, register both layers in writing, and back every Longwood job with the Done Right Promise.
Call (954) 280-4413 to schedule your free estimate. A live person answers. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Longwood and surrounding Seminole County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.