Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Weston
Custom windows and doors in Weston are not a simple swap-out job. In this city, every replacement has to satisfy Broward County’s High Velocity Hurricane Zone code *and* a deed-restricted HOA architectural review board that often cares more about an eighth-inch mullion spacing than about the impact rating. We know because we have filed hundreds of submittals in villages like Weston Hills, The Ridges, and Savanna, and we understand what gets approved on the first pass. If you are planning custom shape windows, oversized glass panels, or architectural grilles and SDLs, call (954) 280-4413 and we will walk you through the full sequence before you spend a dollar.
TruePane has been setting windows and hanging doors in South Florida since 2008 under Dale Kessler’s rule: if the pane is not true, the job is not done. We run our Custom Windows & Doors work in Weston through the same standard, and we quote every job in writing, side by side across manufacturer lines, before the truck rolls.
Why TruePane Windows & Doors Is Weston’s Preferred Custom Windows & Doors Company
Weston homeowners tend to keep their houses for twenty years or more. That means when a window fails, they want it fixed by someone who will still answer the phone in ten years. We are that company. TruePane is a second-generation glazier’s shop, not a franchise playbook, and we hire local, train apprentices into journeymen, and plan to be in Weston in thirty years. We sponsor county fairs and church roof funds because we intend to stay.
Our technicians show up uniformed, background-checked, and on time, and they measure every opening twice before any custom unit is ordered. The first thing we do on a Weston estimate is check whether the job needs HOA submittal, and we file that paperwork before we pull the county permit. That sequencing alone has saved our Weston customers weeks of delay and thousands in re-ordered frames.
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI, and we quote manufacturer lines side by side on paper so you see exactly what you are buying. Every job carries our Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before our truck leaves your driveway. A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree, not a callback form, not a regional call center. Call (954) 280-4413 and a human picks up.
Our Custom Windows & Doors Services in Weston
We handle the full range of Custom Windows & Doors in Weston, but three types of work dominate this market because of Weston’s housing stock: custom shape windows for Arvida-era architectural profiles, architectural grilles and SDLs that have to match original sightline spacing, and oversized glass panels where jamb depth matters more than most contractors check.
Custom Shape Windows
Weston is full of radius-tops, octagons, and arched transoms that were built into Mediterranean- and Spanish-style homes between 1990 and 2005. Those shapes are not off-the-shelf stock. They are built to order, and in Weston every one of them has to match the original profile the HOA recorded. We measure to the sixteenth of an inch, spec fusion-welded frames instead of mechanically joined corners, and order impact-rated glazing that holds up under Broward County’s HVHZ wind-load requirements. A typical custom radius-top window in Weston runs $900-$2,400 installed, depending on the opening size and whether it needs a new rough-opening frame.

Architectural Grilles & SDLs
Simulated divided lites are the single fastest way to lose an HOA approval in Weston. The Arvida-era spec called out exact grid patterns, and today’s boards check mullion spacing against the original elevation drawings. We match grille widths and miter profiles to the existing windows, and we offer SDLs in flat, contour, and shadow-bar profiles so the new units read identical to what the original builder installed. If your HOA packet lists a required bar width, we build to that number. If it does not, we help you document what is already on the house so the board has a clear precedent on file.

Oversized Glass Panels
Weston homes built along golf course and lake frontages often have large fixed picture windows and sliding glass panels that run eight feet wide or more. Those panels take heavy wind load and settle into their openings over time, and replacing them without checking the original CBS rough opening is how custom sash end up binding and refusing to close flush. Before we order glass, we check jamb depth, level, and square on the existing opening, and we spec laminated impact-rated glass with the right thickness for the span. Oversized panel replacements in Weston generally run $1,800-$5,500 per opening, depending on glass area and whether the frame itself is being rebuilt.

Commercial Storefront Glazing
Weston’s ground-floor commercial spaces in developments like Weston Town Center and the corporate parks off Bonaventure Boulevard run into the same HOA and county standards as the residences, plus commercial glazing code. We replace storefront glass and aluminum frames to Florida Building Code, handle curtain wall repairs and full-panel swaps, and work after business hours when a broken pane is costing a shop owner sales. Storefront glass replacement in Weston typically runs $900-$3,800 depending on panel size, glass type, and whether the existing mullions can be reused.

Curtain Wall Systems
For Weston commercial spaces with full-height glass facades, we repair and replace curtain wall sections while keeping the building weathertight. We are not a storefront-only shop; our glaziers have decades of experience with perimeter caulk joints, pressure plates, and thermal breaks. A curtain wall leak in Weston’s humidity and summer downpours takes priority, and we quote the repair before we open the wall so there are no surprise line items.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Weston
We are an authorized installer for more than a dozen manufacturer lines, and in Weston we commonly quote ES Windows, ECO Window Systems side by side so homeowners can compare frame profiles, glass packages, and warranty terms on paper. We do not push one manufacturer. We push the one that matches your HOA’s spec and your budget. Because we order from local distribution for Weston jobs, most custom units arrive in two to four weeks after approval, and we store them carefully until the approval paperwork clears so the job is not sitting half-finished on your driveway.
Common Custom Windows & Doors Problems We See in Weston Homes
The homes in Weston were built in a tight window of time, which means failures are arriving in waves. Here is what we most often walk into:
- HOA rejection after the county permit was pulled. A contractor files Broward County’s HVHZ permit first, orders the windows, and then the HOA architectural committee rejects the frame color or grid pattern. The job halts, units get re-ordered, and the homeowner loses weeks. We file HOA review first, always.
- Aluminum frame oxidation under Weston’s UV and humidity. Original Arvida-era aluminum frames are now 25 to 35 years old, and the sustained sun and moisture are delaminating seals and pitting the metal. On custom shape windows, you cannot just swap the sash; the shape has to be re-fabricated.
- Fogged glass in custom radius-tops and picture windows. Early-generation insulated glass units have hit end of life across Weston’s villages simultaneously. When the seal fails, you have two choices: replace the glazing pack inside the existing frame where the frame is sound, or rebuild the whole unit where oxidation has reached the corners.
- Impact glass ordered without checking the CBS rough opening. Weston’s concrete block construction means the rough opening depth is fixed. Order a thicker impact unit without confirming the jamb depth and the new sash binds. We check every rough opening before we ever place the glass order.
Pricing for Custom Windows & Doors in Weston, FL
Here is what you should expect to budget in Weston’s market. Custom shape windows run $900-$2,400 per opening. Architectural grilles and SDLs typically add $180-$600 per window, depending on the profile and whether they are interior, exterior, or shadow bars. Oversized glass panels run $1,800-$5,500. Commercial storefront glazing runs $900-$3,800 per panel. Curtain wall repairs are quoted by the linear foot after an inspection, and most Weston jobs fall between $1,200 and $6,000 depending on how much of the pressure-plate system must be rebuilt.
What moves the number most is the HOA spec. An exact bronze anodized finish match costs more than a stock white. A custom mullion spacing that must mirror the original Arvida drawings costs more than a standard grid. We show you those costs on paper before you approve anything, and our estimate is the price. No change orders because we missed the rough opening depth. To get an exact quote for your home, call (954) 280-4413. Estimates are free.
We Also Serve Cities Near Weston
In addition to our work throughout Weston, our crews serve Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are nearby and need custom windows or doors quoted, call (954) 280-4413 and we will schedule a visit to your home or business.
Serving Weston, FL - Our Local Coverage Area
We’re based in the Weston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Weston
Yes, in most Weston villages the deed restrictions require an exact frame color and profile match to the original Arvida-era specification, and boards have been known to reject a bronze anodized finish that is one shade off. We pull the original elevation drawings or photograph the existing windows so the submittal matches what the board has on file. Call (954) 280-4413 and we will check your specific village’s standard before you order.
In most Weston villages, no. Changing the window type alters the sightline and profile from the original spec, so the architectural committee normally requires a new submittal even if the frame color stays the same. We file the review for you, before the county permit, so you are not holding custom units without approval.
Plan for two to six weeks added to the calendar, depending on your village’s committee meeting schedule. That is the window between measurement and ordering. We sequence the work so this review runs in parallel with permitting where the village allows it, and we never order glass until the approval is in writing. Call (954) 280-4413 and we will give you a realistic timeline for your specific village.
Not always. If the frame is structurally sound and the HOA does not require a full-frame replacement, we can replace the insulated glass unit inside the existing frame and match the original glass thickness. If the aluminum frame has oxidized or the rough opening is out of square, a full replacement is the honest answer. We will tell you which one you need after measuring, not before.
Yes. Weston is in Broward County’s High Velocity Hurricane Zone, which requires impact-rated glazing and frames to stricter wind-load standards than most of Florida, and your HOA may also dictate door hardware finishes, frame profiles, and even the window grid pattern on any replacement door. We handle both the HVHZ compliance and the HOA submittal as part of the job. For exact requirements on your street, call (954) 280-4413.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Weston and surrounding communities with a second-generation glazier’s standard since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After