Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Altoona
Door installation in Altoona runs $450-$2,800 for most entry and swing doors, depending on whether you’re replacing a standard site-built opening or a non-standard opening on an older manufactured home. We’re TruePane Windows & Doors, and we’ve been setting doors square in rural Lake County long enough to know that Altoona is different from the suburbs down the road. The housing stock here, the humidity off the forest, the HUD-code units along the Ocala National Forest edge: all of it shapes what a correct door installation looks like. If you’re in Altoona and need a door measured, quoted, and set right, call (954) 280-4413.
Why TruePane Windows & Doors Is Altoona’s Preferred Door Installation Company
We are not the cheapest door company in Lake County, and we don’t try to be. What we are is the company Altoona homeowners call after a stock door frame gets forced into a manufactured home opening and the gaps start leaking humid air by the second rainy season. Our crews know the difference between a site-built rough opening on a ranch-style home off County Road 42 and a non-standard opening on a 1980s HUD-code unit. That distinction matters, and most general contractors in the area miss it entirely.
Our techs recently replaced an entry door on a 1990s manufactured home near the Ocala National Forest edge in the Altoona corridor, where the original jalousie door’s frame had rotted from years of storm-driven humidity. We sourced a manufactured-home-certified swing door that matched the non-standard rough opening, installed new flashing tape and weatherstripping, and kept the HUD classification intact, no voiding the warranty. That is the kind of work we do in Altoona every week. We measure twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. No surprises on the bill, no second appointment left hanging. Call (954) 280-4413 and a live person answers, any hour, any day.
Our Door Installation Services in Altoona
Entry & Swing Doors
A new entry door in Altoona does more than change the look of the house. It is the first line against the humidity that sits over this part of Lake County from June through September. We install steel, fiberglass, and wood swing doors sized correctly for the opening, not shimmed and caulked into a gap. For manufactured homes, we source certified units that preserve the HUD classification. For site-built ranch homes, we set the door with a sill pan and full flashing tape so the threshold does not rot within two rainy seasons.
Storm Doors
Storm doors make sense in Altoona, especially on homes with heavy tree canopy nearby. Pine sap, pollen, and forest debris work their way onto door thresholds and weatherstripping faster than most homeowners expect. A properly fitted storm door protects the primary entry door and adds a layer of ventilation control during the humid months. We install storm doors sized to the existing frame, including on manufactured homes where the rough opening is not a standard width.
Arched & Custom Doors
Some of the newer and remodeled homes in Altoona use arched or custom door shapes, and those are where we see the most botched installs from other outfits. A custom door has to be ordered to a measured template, not a guess. We measure the opening at multiple points, order the door to spec, and set it so the reveal is consistent top to bottom. If the pane is not true, the job is not done. That rule comes from Dale Kessler, the second-generation glazier who founded TruePane, and it governs every custom door we hang in Altoona.
Double & French Doors
Double and French doors on an older Altoona home often need hinge and jamb correction before a new unit goes in. Years of settling and humidity have moved the framing. We rebuild the rough opening where needed, set the sill level, and hang both panels so they meet cleanly at the center with no binding. If the door binds in July, it was never set right to begin with. Our crews are background-checked, uniformed, and trained to correct the framing first rather than forcing the door to fit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Altoona
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Altoona door work we commonly quote PGT, CGI, and Plastpro for entry and storm door applications. We also service existing Ply Gem and CWS products when a repair makes more sense than a full replacement. Because we quote manufacturer lines side by side on paper, you see exactly what you are buying and what each line costs before you commit. We register both manufacturer warranty layers in writing before we leave the driveway, and our Done Right Promise covers the workmanship on every install. That is The Keystone Standard, and it is not fine print.
Common Door Installation Problems We See in Altoona Homes
- Stock frames forced into manufactured home openings. A standard 36-inch pre-hung door will not fit a non-standard rough opening on many 1970s-1990s HUD-code units in Altoona. Contractors who try it leave oversized gaps that leak humid air and trigger complaints. We source manufactured-home-certified units sized to the actual opening.
- No sill pan or flashing tape. Altoona’s heavy tree canopy drops pine needles and debris onto thresholds, and afternoon thunderstorms push water sideways. Without a proper sill pan and flashing tape, the subfloor under the threshold rots out. We can walk you through both on every exterior door, no exceptions.
- HOA approval skipped on newer builds. Altoona’s newer master-planned and HOA-governed communities have architectural review rules for exterior door changes. Homeowners who replace a front door without approval end up with a violation notice and sometimes a forced reversal. We help you prepare the submittal before the door is ordered.
- Builder warranty voided by structural alteration. Some homeowners widen an opening or alter framing to fit a larger door on a newer home, which can void the builder’s structural warranty. We install within the existing opening and tell you plainly if a size change requires a structural engineer and architectural committee sign-off first.
Pricing for Door Installation in Altoona, FL
Here are the numbers we quote in Altoona, based on the homes we actually measure here. A standard entry door replacement on a site-built ranch home runs $450-$1,200 for the installation labor, not including the door itself. A manufactured-home-certified entry door on a non-standard opening runs $700-$1,800, because the unit costs more and the rough opening usually needs correction work. Storm doors run $250-$650 installed. Arched and custom doors run $1,200-$2,800 depending on material, glass, and hardware. These are real ranges from this market, not national averages. Pricing is fixed when we quote it: no change orders, no surprise line items. Call (954) 280-4413 for an exact quote on your opening. Estimates are free.
We Also Serve Cities Near Altoona
Our Door Installation team works throughout the Altoona area every week, so scheduling and response are consistent across the neighboring communities. We regularly serve Umatilla, Paisley, Eustis, and Mount Dora with the same fixed pricing and the same written warranty registration. If you live just outside Altoona, Altoona is still your local service area, and we will be there when we say we will.
Serving Altoona, FL - Our Local Coverage Area
We’re based in the Altoona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Altoona
Yes, you likely need a manufactured-home-certified door sized to your non-standard rough opening, not a stock site-built unit. Most 1980s HUD-code homes in Altoona have rough openings that differ from standard residential framing by an inch or more in width or height. Forcing a standard pre-hung door into that opening creates gaps that leak humid air and insects. The replacement door must come from a manufacturer line that certifies units for manufactured-home applications so the home’s HUD classification stays intact. Call (954) 280-4413 and we’ll measure the opening and tell you exactly what fits before you spend a dollar.
Most Altoona HOA architectural committees want three things: a product spec sheet for the replacement door, a color and finish sample or swatch, and a written confirmation that the installation will not alter the existing structural opening. We prepare all three as part of our written estimate. If you are matching an existing door style or color, the submittal is straightforward and most committees approve within a week or two. Call (954) 280-4413 and we’ll put the package together for you.
Yes, as long as the storm door is surface-mounted to the existing door frame and no structural modification is made to the rough opening or the exterior wall. The key is using the correct mounting hardware for the material of the existing door frame, which on many Altoona manufactured homes is wood or aluminum, not solid wood. We install storm doors on manufactured homes regularly without touching the HUD classification or any builder warranty. Call (954) 280-4413 for a quote on your specific frame.
Because Altoona’s humidity and canopy debris work together against the threshold joint. The porch roof stops direct rain but not wind-driven humidity or the wet pine needles and oak debris that settle against the threshold after every afternoon storm. If the original install skipped the sill pan and flashing tape, the subfloor wicks that moisture and the threshold rots from below. We replace the rotted substrate, install a proper sill pan, and set the new threshold with full flashing tape so it does not fail again in two rainy seasons. Call (954) 280-4413 for an inspection and fixed quote.
Impact-rated doors are tested to withstand wind-borne debris during a storm, and they are required for new construction and major renovations in many Florida code zones. A standard entry door is not impact-tested and will not meet code where impact protection is required. In Altoona, the need depends on your home’s location, construction date, and whether you are pulling a permit for the door change. We quote both standard and impact-rated options from PGT and CGI side by side on paper, so you see the price difference and code implications before you decide. Call (954) 280-4413 and we’ll tell you what your house actually requires.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Altoona and Lake County with door and window installation done right.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.