Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across South Bay
Door installation in South Bay is not the same job as it is ten miles east. The lake, the dike, the sugarcane ash, the 1960s concrete block homes with original jalousie frames – each one changes how a door has to be set. TruePane Windows & Doors has been setting doors in this town long enough to know what holds up and what fails, and we install to this microclimate, not to a generic Palm Beach County spec. If you need a new entry door, a storm door, or a fully custom arched door on your South Bay home, call (954) 280-4413 and we’ll give you a straight answer and a written quote.
Why TruePane Windows & Doors Is South Bay’s Preferred Door Installation Company
We’re a second-generation glazier company, founded by Dale Kessler, and we’ve served South Bay neighborhoods like the lakefront streets off US-441, the blocks near the South Bay RV Park, and the older homes along Palm Beach Road for years. Our techs know these houses. They know the CBS block construction, the corroded aluminum jalousie frames, and the way a door set too low on a slab wicks water the first time the wind kicks up off Lake Okeechobee.
South Bay homeowners tend to stay put. Many have owned the same house for twenty, thirty years, and they remember the last door that stuck in July and let rain in every August. Our crew arrives uniformed, background-checked, and on time. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway. A live person answers the phone 24 hours a day, seven days a week – no voicemail tree, no callback form. That matters when a storm is coming and your front door is the only thing between your living room and the lake.
Our Door Installation Services in South Bay
Entry & Swing Doors
Most South Bay entry doors sit on slabs poured in the 1950s through 1970s, and the openings are rarely square anymore. We set entry doors on flood-rated pans as standard here, not as an upgrade, because lake storm surge pushes water laterally at angles a code-minimum threshold won’t stop. We carry impact-rated lines from Andersen, Pella, and CGI, so you get a door that meets Florida Building Code hurricane requirements and actually looks right on a mid-century block house.
Storm Doors
A well-built storm door does two jobs in South Bay: it shields your primary entry door from ash fallout during the November-through-April sugarcane burn season, and it gives you a second layer against wind-driven rain. If you have an original jalousie front door still in service, a storm door buys you time and comfort while you plan a full replacement. We’ll set it square, flash it properly at the jambs, and make sure it clears the threshold even after the slab settles another quarter inch.
Double & French Doors
Double doors are beautiful until the inactive panel starts to sag and the two leaves bind at the center. On South Bay homes, moisture and ash make that happen faster than the manufacturer’s typical timeline. We reinforce the active and inactive leaf hardware, use stainless fasteners that won’t rust out in lake humidity, and set both panels on a single continuous flood-rated pan so water can’t sneak under the astragal.
Bifold & Folding Doors and Pivot Doors
Bifold doors opening onto a patio feel right on a lakefront lot, but South Bay’s humidity will swell panels and seize rollers if the tracks are not drained and flushed. We install bifold and pivot door systems with stainless hardware and drainage that actually drains, and we show every homeowner how the spring track flush works after burn season. Pivot doors on older CBS homes need blocking behind the drywall and a header that can carry the weight – we check both before the first hinge is hung.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Bay
TruePane is an authorized installer for more than a dozen manufacturer lines, and for South Bay we stock local parts for the brands that hold up here: CGI impact doors, ES Windows, ECO Window Systems, and CWS. That means if a roller fails or a threshold needs replacement after a storm, we’re not waiting on a regional warehouse. We keep common hardware in the truck, and we can quote Andersen, Pella, Marvin, and Milgard side by side on paper so you see exactly what you’re buying and what each warranty covers. For South Bay’s lakefront exposure, we typically recommend CGI or ES Windows when impact rating and corrosion resistance have to do the heavy lifting.
Common Door Installation Problems We See in South Bay Homes
- Thresholds set too low for flood exposure. Many original doors in South Bay were set at slab grade with no pan, and during wind-driven rain off Lake Okeechobee, water migrates under the threshold and into the house. We raise thresholds and set flood-rated pans as standard.
- Corroded aluminum frames and jambs. The original jalousie and aluminum entry frames on 1950s and 1960s homes corrode at the sill from decades of ground moisture, and the corrosion travels upward into the door frame. Once that starts, the only real fix is a full frame replacement tied into the CBS block.
- Sugarcane ash fouling hardware and tracks. Every burn season deposits fine ash on South Bay homes, and it works into door hardware, weatherstripping, and sliding tracks. Ash is abrasive and hygroscopic – it holds moisture against the metal, which accelerates oxidation and causes binding within a single season.
- Door frames not tied into CBS block. Many original openings were framed with whatever was on the truck and never fastened to the block properly. South Bay’s humidity drives rot into those gaps, and a door that feels loose or rattles in the wind is usually a frame that was never anchored.
Pricing for Door Installation in South Bay, FL
A standard impact-rated entry door install in South Bay typically runs $2,800 to $5,500 depending on the manufacturer, the condition of the existing frame, and whether we’re doing a full frame replacement or a retrofit into solid block. A storm door with installation runs $600 to $1,400. Double French doors with a continuous flood-rated pan generally land between $4,500 and $8,000. Bifold and pivot door systems start around $5,000 and go up from there based on panel width and hardware. If the frame is rotted or the opening is not square – common on 1960s slabs – frame correction adds $400 to $900. We write every quote as a line item before work starts, and we do not add surprise line items to the bill. Call (954) 280-4413 for a free written estimate.
We Also Serve Cities Near South Bay
Our crews work the full southern Lake Okeechobee corridor. Beyond South Bay, we install doors regularly in Belle Glade, Lake Harbor, Pahokee, and Clewiston, and our Door Installation team covers the same flood-pan and corrosion standards in every one of those towns. If you’re on the lake side of any of them, the same rules apply.
Serving South Bay, FL - Our Local Coverage Area
We’re based in the South Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in South Bay
Yes, in our experience, a flood-rated pan is the single most important upgrade for any exterior door in South Bay, mapped zone or not. The lake can push water laterally during wind events in ways that standard code-minimum thresholds are not designed to stop, and water that gets under a door once will get under it again. We include a flood-rated pan on every exterior door install in South Bay without treating it as an add-on. Call (954) 280-4413 and we’ll explain what that means for your specific door opening over the phone.
Sugarcane burn season, roughly November through April, drops fine ash and particulate across the South Bay area, and that ash works into weatherstripping, door hardware, and sliding glass door tracks. It is abrasive and holds moisture against metal, which accelerates rust and makes aluminum sliding doors bind. We recommend a track flush and weatherstripping inspection every spring after burn season ends, and we do that work for South Bay homeowners every year. Call (954) 280-4413 to schedule yours.
Replacing a single exterior door in South Bay typically does not, on its own, trigger a requirement to replace every window in the house with impact-rated glazing. What it does trigger is the door itself meeting current Florida Building Code, which includes wind-load and impact requirements for the new door. If you’re already replacing windows or doing a larger renovation, the permit conversation changes. We’ll tell you exactly what your project triggers before any work starts. Call (954) 280-4413 for a straight answer on your specific home.
Yes, in most South Bay homes we can install a storm door over an existing jalousie door, but it works best when the primary door frame is still structurally sound. The storm door takes the brunt of ash, wind, and rain, which extends the life of the jalousie doors. If the jalousie frame is already corroded at the sill, though, the storm door just buys time while you plan the real fix. We’ll tell you which situation you’re in when we see the opening.
Binding during the dry season is almost always ash buildup in the track or a roller that has been corroded by lake moisture, and the fastest fix is a track flush and roller inspection. Do not force the panel – forcing a bound sliding door can bend the frame and make the repair more expensive. Our techs flush South Bay sliding door tracks every spring after burn season, and we keep common replacement rollers in the truck. Call (954) 280-4413 and we’ll get it sliding properly again.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.