Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Energy-Efficient Windows Across Sunrise
Sunrise sits square in Florida’s High Velocity Hurricane Zone, and that single fact changes everything about what a window has to do. In most of the country, an energy-efficient window is about comfort and utility bills. Here in Broward County, it also has to carry a Miami-Dade Notice of Acceptance, survive driven rain and 140-plus mph wind loads, and still cut your cooling costs through a summer that runs from April to November. TruePane Windows & Doors installs energy-efficient windows in Sunrise built to that standard on every job, with both manufacturer warranty layers registered in writing before our truck leaves your driveway. Call (954) 280-4413 for a free estimate.
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the shop whiteboard: if the pane is not true, the job is not done. That rule matters more in Sunrise than almost anywhere else we work, because a window that is even slightly out of square here does not just leak air. It leaks money, and it leaks water into a wall system that has to withstand hurricane-force pressure. We measure every opening twice before we order a single unit.
Why TruePane Windows & Doors Is Sunrise’s Preferred Energy-Efficient Windows Company
We have worked on homes in Sunrise Golf Village, Welleby, and the condo communities along Springtree Drive, and we know what sits inside the walls of this city’s housing stock. Most of it went up between 1961 and the late 1980s, which means concrete block, stucco, and original aluminum single-pane windows that were not built to current Florida Building Code. Homeowners call us after their third or fourth summer of running the AC nonstop and watching the electric meter spin.
Our technicians are background-checked and uniformed, and they work in your home the way they would work in their own mother’s house. We do not subcontract the sales pitch and we do not send a different crew for the install. The same people who quote your Sunrise job are the people who pull the permit, set the window, and come back if anything is not right under our Done Right Promise. We are an authorized installer for major manufacturers including PGT, CGI, and ES Windows, so the warranty on your glass and frame is real, stated in writing, and registered before we leave.
Response time to Sunrise is straightforward: we schedule within days, not weeks, and a live person answers the phone 24 hours a day, seven days a week. Not a voicemail tree, not a regional call center. That matters to the homeowner who has been burned once and is paying attention this time.
Our Energy-Efficient Windows Services in Sunrise
Low-E & Argon Gas Glass
Low-emissivity coating and argon gas fill are the two workhorses of energy-efficient glass, and in Sunrise they do real measurable work. Low-E reflects solar heat back outside while letting light through, which matters in a city where afternoon thunderstorms break the heat but the sun comes back hotter. Argon between the panes slows heat transfer. We spec both on nearly every replacement window we install in Sunrise because the combination drops the U-factor of the glass meaningfully, and because a failed seal lets the argon escape and the window turns cloudy within a few seasons. On a 1972 concrete block ranch in Sunrise Golf Village, we recently replaced a wall of corroded jalousie windows and a fogged sliding glass door with impact-rated double-hung units using low-E glass and argon fill. The homeowner’s next FPL bill dropped noticeably. The fog came from a sealed unit that had lost its argon years ago. That is the failure mode that tells you it is time.

ENERGY STAR Replacement Windows
ENERGY STAR certification for the Southern zone requires a U-factor of 0.40 or lower and a solar heat gain coefficient of 0.25 or lower, and those numbers align well with what Sunrise homes need. But there is a catch here that does not exist in most places: an ENERGY STAR window in Sunrise still must carry a Miami-Dade NOA if it is going in an opening required to protect against windborne debris. We quote both sides of that equation on paper, manufacturer lines side by side, so you see exactly what you are buying and what it is rated to withstand.

Double & Triple Pane Windows
Double-pane windows are the standard for energy-efficient replacement in Sunrise, and for most homes they are the right call. Triple-pane units exist, and they deliver better thermal performance, but the added weight requires a stronger frame and the cost difference often does not pay back in a climate where cooling, not heating, drives the load. We will tell you that plainly. Our job is not to upsell you into triple pane because it sounds impressive. It is to put a window in your Sunrise home that will still be doing its job, true and sealed, twenty years from now.

UV-Blocking & Fade Protection
Sunrise’s high sun exposure fades furniture, flooring, and woodwork faster than most homeowners expect, especially in living rooms with western or southern exposure. Low-E coatings block the majority of the UV spectrum that causes fade, and tinted or spectrally selective glass options go further. We have seen leather sofas in Welleby living rooms that have lost all color on one side. The right glass stops that before it starts, and it does not require making the room feel like a cave. We carry clear low-E, lightly tinted, and deeper solar-control options from Andersen and ES Windows, and we will show you samples before you commit.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
TruePane is an authorized installer for more than a dozen manufacturer lines, and on energy-efficient jobs in Sunrise we commonly quote, ES Windows, and ECO Window Systems. Each line has different strengths: Andersen offers reliable thermally broken frames and wide availability, ES Windows builds extremely tight impact-rated units that perform well in HVHZ conditions, and ECO Window Systems makes a solid mid-range product that meets Florida codes without a premium price. We stock common components and gaskets for these lines locally and we can source full units quickly because we order direct from the manufacturer, not through a distributor who adds a week and a markup.
Common Energy-Efficient Windows Problems We See in Sunrise Homes
- Corroded aluminum frames. Original single-pane aluminum windows from the 1960s through 1980s have no thermal break, so they sweat on the inside during Sunrise’s humid afternoons. That condensation feeds corrosion around the jambs and sills, and eventually the window will not open or close square. Salt-laden storm air from the Atlantic accelerates this considerably compared to inland Georgia or the Carolinas.
- Seized hardware from salt and moisture. Standard steel window hardware, hinges, and locks rust and bind within a few seasons in Sunrise’s coastal-adjacent air. We replace failed hardware with stainless or hot-dip galvanized components, or with hardware the manufacturer has rated for HVHZ exposure, because the cheap spec costs more within a decade.
- Failed seals and fogged glass. Insulated glass units lose their argon fill when the perimeter seal degrades, and Sunrise’s heat cycling and afternoon storms push that degradation along faster than in drier climates. A cloudy window is a window that no longer insulates to its rated U-factor, and there is no repair that restores argon fill. The glass unit gets replaced.
- Jalousie windows that cannot meet code. A meaningful share of Sunrise’s 1960s and 1970s HOA communities still contain original jalousie louvered windows. The Florida Building Code no longer permits them for new installation, they rate near zero for wind resistance, and they leak air and water through every louver joint. Whole-house jalousie-to-impact conversions are a routine job type in Sunrise that contractors in newer cities like Weston rarely see at the same volume.
Pricing for Energy-Efficient Windows in Sunrise, FL
A typical double-pane, low-E, argon-filled, impact-rated vinyl window in Sunrise runs $700 to $1,300 per opening installed, including the permit and Miami-Dade NOA documentation. Smaller fixed windows and single-hung units sit at the lower end; larger double-hung, casement, and sliding door combinations run higher. Triple-pane units usually add 20 to 35 percent. Jalousie-to-impact conversions are priced per opening but often land between $900 and $1,500 per unit because they require new bucking, exterior finish work, and sometimes stucco repair around the roughed-in opening. A full-house replacement of ten to fifteen openings in a 1970s Sunrise ranch typically lands between $9,000 and $18,000 before any insurance premium reduction or energy savings. Those savings are real and we will help you document them for your Broward County insurer. Call (954) 280-4413 and we will put a firm, written, line-item estimate in your hand. Free, no obligation, and the number we quote is the number you pay.
We Also Serve Cities Near Sunrise
TruePane’s crew serves Sunrise and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are near the Sunrise line in any direction, we will bring the same HVHZ-compliant approach and the same Done Right Promise to your door. You can reach us at (954) 280-4413, and you can learn more about our full service area on our Sunrise page.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Sunrise
Because Sunrise lies entirely within Florida’s High Velocity Hurricane Zone, while Palm Beach County sits outside it in most areas. The HVHZ designation means every window and door opening must carry a Miami-Dade Notice of Acceptance certifying the product is approved for impact resistance and wind pressures up to the zone’s design loads. Boca Raton is in Palm Beach County, where the standard is the Florida Building Code statewide requirement, which is strict but not HVHZ-strict. When we install energy-efficient windows in Sunrise, we pull the permit, the county inspects the opening, and the NOA documentation is part of your packet for insurance purposes. Call (954) 280-4413 if you want us to check whether your current windows carry NOA documentation at all.
Yes. Broward County homeowners insurance carriers offer documented premium discounts for what they call “opening protection,” which means every window and door that faces the wind is either impact-rated or protected by a rated shutter system. Impact-rated low-E windows satisfy that requirement and earn the discount. The documentation is the key: you need the Miami-Dade NOA for each product, the permit number from the installation, and the final inspection sign-off from the county. TruePane registers both manufacturer warranty layers in writing and assembles that documentation for every Sunrise job. We hand you the packet before we leave, and we will walk you through what to send your agent. Call (954) 280-4413 for an exact quote on your openings.
Yes, and that is one of the most common jobs we do in Sunrise’s older neighborhoods like Sunrise Golf Village and the communities along Springtree Drive. Jalousie windows are no longer permitted under the Florida Building Code for new installation, and replacing them with double-hung energy-efficient units requires reframing the rough opening and sometimes repairing the surrounding stucco. The result is a tighter, quieter, code-compliant window that meets HVHZ impact standards and cuts cooling costs. The job is more involved than a standard sash replacement, but it is routine for our crew and we price it on a per-opening basis before any work starts. Call (954) 280-4413 and we will measure and quote the whole wall.
Argon gas stays sealed between the glass panes inside the insulated glass unit, protected from outside humidity and salt air as long as the perimeter seal remains intact. What attacks the seal is the heat cycling, structural flex, and driven rain that Sunrise’s climate dishes out. A properly installed window with a solid frame seal and stainless flashing tape around the jambs will hold its argon for decades. On that 1972 Sunrise Golf Village ranch, the fogged glass we removed had lost its argon because the old aluminum frame had oxidized and flexed over forty years, stressing the seal until it failed. The new fusion-welded frame with a proper flashing detail will not move the same way. We register the glass manufacturer warranty in writing and you will know exactly what is covered and for how long.
For an ENERGY STAR Southern-zone window in Sunrise, target a U-factor of 0.40 or lower and a solar heat gain coefficient of 0.25 or lower. Those numbers will cut cooling costs through the long South Florida summer. But in Sunrise the HVHZ rule is non-negotiable: any window going into an opening that requires windborne debris protection must carry a Miami-Dade NOA regardless of its energy numbers. You can absolutely have both. Impact-rated, low-E, argon-filled double pane windows from manufacturers like PGT, CGI, and ES Windows meet both standards, and we quote them side by side on paper so you see the U-factor, SHGC, and NOA compliance for each line before you spend a dollar. Call (954) 280-4413 for a written estimate and an honest conversation about what your home actually needs.
Call TruePane for Energy-Efficient Windows in Sunrise
We have been doing this work in South Florida since 2008, and we plan to be here in thirty more. That is the company Dale Kessler built: local, accountable, and unwilling to walk away from a job until the pane is true. When you are ready to replace your energy-efficient windows in Sunrise, call (954) 280-4413. You will get a live person, a free estimate, and a straight answer about what your home needs and what it does not.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After