Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Lake Clarke Shores
Impact window and door replacement in Lake Clarke Shores is not a cosmetic upgrade. It’s a code-compliance step most homeowners here can’t put off much longer. Nearly every house in this town was built between the early 1950s and late 1970s, well before Florida’s post-Hurricane Andrew building code took effect, which means the original jalousie windows and aluminum sliders on lake-facing elevations fail current Palm Beach County wind-load requirements. We help Lake Clarke Shores homeowners replace those openings with impact-rated units that pass wind-mitigation inspection and hold up to the humidity coming off Lake Clarke. Call (954) 280-4413 for a free estimate on your home.
Why TruePane Windows & Doors Is Lake Clarke Shores’s Preferred Impact Windows & Doors Company
We have walked enough Lake Clarke Shores driveways to know what the louvered crank hardware on a rear elevation means before we step inside. That jalousie window is a non-compliant opening under the Florida Building Code, and your insurer likely flagged it in a wind-mitigation inspection. We know this town’s housing stock because we have measured it, replaced it, and registered both warranty layers on it for years. Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. We hire local, train apprentices into journeymen, and plan to be answering the phone in this community thirty years from now.
Our Impact Windows & Doors team works on concrete-block ranch homes along Lakeshore Drive, around the canal-side streets, and everywhere in between. Background-checked, uniformed technicians measure every opening twice. You get side-by-side manufacturer quotes on paper. You get both warranty layers registered in writing before the truck leaves your driveway. And you get the Done Right Promise: if it is not done right, we make it right. No paperwork fights. No arguing.
Our Impact Windows & Doors Services in Lake Clarke Shores
Hurricane Impact Windows
Most Lake Clarke Shores ranch homes still carry original single-pane aluminum or jalousie windows. Those louvered glass panels let wind-driven rain into wall cavities, and in a town surrounded by the C-51 canal system, that means rotted wood bucks and hidden mold problems behind the drywall. We replace them with impact-rated double-hung, casement, or fixed windows that meet Palm Beach County’s 160 mph design wind-speed zone. Every unit gets Florida Product Approval documentation.
Impact Sliding Glass Doors
Lake-facing sliders take the worst of the humidity and the salt-tinged air off Lake Clarke. Track corrosion, seized rollers, and failed door sweeps are standard findings on the original aluminum units we remove. Tight setbacks on these small lakeside lots often mean the opening is not a stock size. We custom-order to the measured opening, not the other way around. Impact-rated sliders get the same code compliance and warranty registration as our windows.
Impact Entry & French Doors
Front entries on Lake Clarke Shores homes face the same wind-load review as the lake side. A single non-impact door can fail a wind-mitigation inspection just as fast as a jalousie window. We install impact-rated entry doors and French doors with the proper anchoring and flashing for concrete-block construction. The hardware, the astragal, the weatherstripping: all specified for this climate, not a catalog default.
Impact Garage Doors
Garage doors are the largest opening on most of these 1950s and 1960s ranch homes, and a wind-rated garage door matters for the full structure. A failed garage door under storm pressure can blow out and take the roof with it. We replace and reinforce garage door systems to meet Palm Beach County code, including track bracing and impact-rated panels where the opening requires them.
Wind Mitigation & Code Compliance
This is the service that ties everything together in Lake Clarke Shores. A wind-mitigation inspection fails when openings don’t meet current Florida Building Code. We walk the home, identify every non-compliant opening, and give you a written scope of work with pricing attached. Once the openings are replaced and documented, the inspection result changes. That’s the part most window companies leave for the homeowner to figure out. We don’t.
Hurricane Shutters & Protection
For homeowners not ready to replace every opening this year, shutters provide a code-compliant interim layer. We install accordion, roll-down, and panel shutters sized for the specific openings on these lakeside homes. A shutter system is a legitimate wind-protection step under Florida code, and it buys time to plan a full impact window replacement without staying non-compliant in the meantime.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Clarke Shores
We are an authorized installer for more than a dozen manufacturer lines, and for Lake Clarke Shores homes we most often quote, PGT, and ES Windows side by side on paper so you see exactly what you are buying. Andersen’s impact-rated product holds up well in high-humidity coastal air. PGT is built in Florida and tested for Florida wind zones. ES Windows carries the thermal performance numbers that matter on a lakefront elevation with afternoon sun. We also service and replace units from ECO Window Systems when the existing product matches. Parts for local jobs are stocked in our South Florida metro warehouse, coordinated from our Miami office, and dispatched to Lake Clarke Shores by local crews who know the town.
Common Impact Windows & Doors Problems We See in Lake Clarke Shores Homes
- Jalousie windows on the lake side with seized cranks. The aluminum frames corrode in the persistent humidity off Lake Clarke, the glass louvers stop sealing, and wind-driven rain gets into the wall cavity. Insurers flag these immediately.
- Rotting wood bucks behind original aluminum windows. Decades of moisture intrusion from failed seals and leaking jalousie hardware rot the rough opening framing. You can’t see it until the old unit comes out.
- Corroded sliding door tracks on tight-setback lots. The original aluminum sliders bind, the rollers fail, and egress becomes unsafe. Most of these openings are custom sizes that stock replacements won’t fit.
- Failed insulated glass on lakefront elevations. Persistent humidity accelerates seal failure, fog develops between the panes, argon leaks out, and the thermal performance of the unit drops year over year.
Pricing for Impact Windows & Doors in Lake Clarke Shores, FL
A full opening replacement in Lake Clarke Shores, including tear-out of the original jalousie or single-pane aluminum unit, impact-rated window, and exterior trim, typically runs $900 to $1,800 per window depending on size and product line. Impact sliding glass doors for these lakeside ranch homes generally run $2,200 to $4,500 installed, with custom sizing and corrosion-resistant hardware adding cost. Impact entry doors run $1,800 to $3,800. Garage door replacement or reinforcement runs $1,200 to $3,500 depending on panel rating and track bracing. A home-wide wind-mitigation compliance package on a typical 3-bedroom Lake Clarke Shores ranch, replacing every non-compliant opening, typically lands between $12,000 and $35,000. The single biggest variable is what’s hiding in the rough opening once the old unit comes out. We cover that honestly below.
Call (954) 280-4413 for a free, written, line-item estimate on your Lake Clarke Shores home. We measure every opening twice, and the price you sign is the price you pay. No surprise line items. No change orders without a written approval first.
What Opening Up an Older Lake Clarke Shores Home Actually Turns Up
Here’s what a generic impact window page won’t tell you about this town. When we remove the original jalousie or single-pane aluminum window on a 1963 concrete-block ranch along Lakeshore Drive, we often find the rough opening is not ready for a new unit. Rotted wood buck. Failed flashing. Sometimes undersized or damaged framing that was never corrected when the original builder set the window. In Lake Clarke Shores, where the C-51 canal system wraps the community on multiple sides, decades of humidity and wind-driven rain have worked their way behind those old frames. The damage is invisible from inside the house. You only see it when the old unit comes out.
On that Lakeshore Drive job, our crew found exactly this. Original jalousie windows on the rear elevation, corroded aluminum frames, seized louver cranks. After removing the first unit, the rough opening showed rotted wood buck from years of moisture intrusion. We documented the damage, wrote a change order for framing repair and flashing tape replacement, and installed impact-rated double-hung units with low-E glass and argon fill. The house went from non-compliant to meeting Palm Beach County’s 160 mph wind-load requirements. The homeowner saw photos of the damage before we repaired it and approved the change order in writing. That’s how we work. Inspection first. Allowances written into the contract for known risks on 1950s and 1960s lakeside openings. Any surprise is priced and approved in writing before we touch it.
That’s the difference between a window company that has done this in Lake Clarke Shores and one that has not. We know what’s behind these walls because we have been behind them. The Keystone Standard means both manufacturer warranty layers are registered in writing, durations stated, before the truck leaves. The Done Right Promise means if something is not right, we fix it. A square deal means you knew the framing cost before we cut into it.
We Also Serve Cities Near Lake Clarke Shores
Our crews serve Lake Clarke Shores and the surrounding communities of Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you live just outside town and need impact windows or doors, call (954) 280-4413. We’ll treat your home the same way we treat every Lake Clarke Shores job: measured twice, quoted on paper, and done right.
Serving Lake Clarke Shores, FL - Our Local Coverage Area
We’re based in the Lake Clarke Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Lake Clarke Shores
Jalousie windows are louvered glass panels that do not meet the impact resistance or structural pressure requirements of the current Florida Building Code. In Lake Clarke Shores, where most homes were built with these windows on the lake-facing rear elevations between the early 1950s and late 1970s, insurers flag them during wind-mitigation inspections because they offer essentially no wind or water resistance. A failed wind-mitigation inspection typically means a higher premium or a non-renewal notice. Replacing them with impact-rated units and registering the Florida Product Approval documentation is the fix. Call (954) 280-4413 for an exact quote on your home’s openings, estimates are free.
The rotted wood buck gets repaired or replaced, not covered over. We stop, document the damage with photos and measurements, and write a change order for framing repair and flashing replacement. You approve the work in writing before we proceed. On 1950s and 1960s concrete-block ranch homes along the C-51 canal system, this is a common finding because the original jalousie windows let wind-driven rain into the wall cavity for decades. We build an allowance for this work into the original contract so the cost does not come as a surprise. Call (954) 280-4413 and we’ll explain what an allowance looks like on your specific home.
Yes, replacement windows and doors in Lake Clarke Shores require a permit through the local building department, and the work must meet Palm Beach County’s 160 mph design wind-speed requirements. The permit triggers an inspection of the installation method, the anchoring, and the product approval documentation. When the work is done correctly and the paperwork is in order, the inspection passes and the wind-mitigation report reflects the upgrade. We handle the permit application, the product approval paperwork, and the inspection coordination as part of the job. Call (954) 280-4413 to walk through your specific openings.
Lake Clarke Shores was built out as a compact lakeside enclave between the early 1950s and late 1970s, and the window openings on those original homes were sized for the products available at the time: jalousie units, narrow aluminum sliders, and custom-sized fixed panes. The small lot sizes and tight setbacks along the lake meant builders often cut openings to fit the house, not the other way around. Modern stock impact windows come in standardized sizes that frequently do not match those openings. We custom-order to the measured opening, which costs a bit more but means the unit fits correctly, anchors properly, and passes inspection. Call (954) 280-4413 for a measured quote on your Lake Clarke Shores home.
Lake Clarke is a widened section of the C-51 canal system, and the persistent high humidity it creates accelerates degradation of door weatherstripping, door sweep seals, and aluminum frame finishes on lake-facing elevations. Weatherstripping compresses and loses its rebound faster here than on comparable inland Palm Beach County homes, and aluminum frames show corrosion at corner joints earlier. The fix is specifying door systems with corrosion-resistant hardware and marine-grade weatherstripping, which is what we install on lakeside openings in Lake Clarke Shores. Call (954) 280-4413 to have your existing doors checked, the inspection is part of a free estimate.
Call TruePane Windows & Doors in Lake Clarke Shores
If you live in Lake Clarke Shores and you’re still looking through original jalousie windows or fighting an aluminum slider that binds every July, call (954) 280-4413. We’ll schedule a free estimate, measure every opening twice, and give you a written line-item quote with side-by-side manufacturer options on paper. A live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback form. Dale Kessler built TruePane on a simple rule: if the pane is not true, the job is not done. We stand behind it. Call (954) 280-4413 and we’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.