Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Miami
Impact windows and doors in Miami are not an upgrade; they are the baseline. If your home still has original jalousie windows, single-pane aluminum sliders, or any opening without a Miami-Dade County Notice of Acceptance, you are carrying a vulnerability that Miami’s building code eliminated decades ago. TruePane Windows & Doors installs NOA-approved impact windows and doors across Miami, from Westchester to Coconut Grove, with fixed written pricing and a Done Right Promise on every job. Call (954) 280-4413 and a live person will answer, 24 hours a day, 7 days a week, to schedule your free estimate.
Why TruePane Windows & Doors Is Miami’s Preferred Impact Windows & Doors Company
We have spent years in glazing, and the Miami market teaches things no training room can. The salt in the air off Biscayne Bay eats standard aluminum within years. The pre-1992 concrete block homes that dominate neighborhoods like Westchester, Kendall, and Hialeah have rough openings that were never built for today’s anchoring schedules. And the Miami-Dade HVHZ code does not care what a contractor in Tampa or Orlando got away with; it cares about a Notice of Acceptance number. Our Impact Windows & Doors team works to that standard every day.
Dale Kessler founded TruePane on a rule that still governs every install: if the pane is not true, the job is not done. That rule matters more in Miami than almost anywhere else, because a window set out of square here fails NOA inspection, voids warranty coverage, and leaves a homeowner arguing with an insurance adjuster after the next storm. Our crews are background-checked, uniformed, and trained to measure every opening twice before a single frame is ordered. We register both manufacturer warranty layers in writing before the truck leaves your driveway.
Homeowners from Coral Gables to Key Biscayne call us because they want the job done right the first time, and they want a company that will still answer the phone in thirty years. We answer live, around the clock. No voicemail tree, no call center, no callback form.
Our Impact Windows & Doors Services in Miami
Hurricane Impact Windows
Miami-Dade County is the only High Velocity Hurricane Zone in the country, which means every impact window we install here must carry a Miami-Dade NOA number. That number is not a formality; it certifies the exact glazing, frame, and anchoring system for Miami’s 175 mph design wind speed, the highest mandated in any major U.S. metro. We replace jalousie, awning, and original aluminum windows in pre-1992 CBS homes with fusion-welded impact units sized and anchored for the specific rough opening, not shimmed and caulked into place.
Impact Sliding Glass Doors
The original single-pane aluminum sliders in Miami’s 1950s through early 1990s concrete block homes were not built for post-Andrew wind-load requirements. Replacing them means more than swapping in a new panel. We install impact-rated sliding glass doors with the subsill buck and anchor schedule Miami-Dade requires, and we quote manufacturer lines side by side on paper so you see exactly what you are buying before any money changes hands.
Impact Entry & French Doors
An entry door is the first line of wind-borne debris defense and often the weakest opening in a Miami home. We install impact-rated entry and French doors with marine-grade finishes, because steel and standard aluminum hardware corrode faster within a mile of Biscayne Bay than most manufacturers will admit. If a designer or architect is involved, we coordinate directly and verify NOA approval before anything is ordered.
Impact Garage Doors
Garage doors are the largest opening in most Miami homes and a leading point of structural failure in a hurricane. A brace kit is not the same as a rated impact door. We install impact-rated garage doors and track systems anchored for Miami-Dade wind loads, and we check the surrounding framing, because in older CBS construction the header and jambs often need reinforcement before the door can do its job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Miami
We are an authorized installer for more than a dozen manufacturer lines, and in Miami we most often quote PGT, CGI, and CWS side by side. Each brings different strengths for salt-air exposure, HVHZ anchoring, and high-end architectural finishes. We do not push one brand. We put two or three quotes on paper, in writing, with warranty durations stated, and let you decide. Parts for Miami service calls are stocked locally, so repair work does not stall waiting on a truck from out of state.
Common Impact Windows & Doors Problems We See in Miami Homes
- Salt corrosion within a mile of Biscayne Bay or the Atlantic. Standard aluminum frames, weep holes, and hardware that would last 30 years inland can fail in three to five here. We specify marine-grade anodized or painted finishes as a functional requirement, not an upsell.
- Pre-Andrew rough openings that were never engineered for impact anchoring. Many 1950s through early 1990s CBS homes in Westchester and Kendall have openings that are oversized, undersized, or out of square. Force-fitting a new impact window with shims cracks stucco and fails NOA inspection. The fix is a properly anchored subsill buck, done before the window goes in.
- Jalousie windows still in service. Tens of thousands of Miami homes still have louvered glass jalousies that are banned in new construction and offer essentially zero hurricane protection. Removing and replacing them with NOA-approved impact units is a principal repair category in Hialeah and Westchester.
- Designer-specified custom glass with no NOA verification. We have seen high-end Coconut Grove and Coral Gables projects where architectural glass or custom millwork was ordered before anyone confirmed the NOA approval. The schedule stalls, insurance discounts get complicated, and someone eats the cost. We check NOA first, always.
Pricing for Impact Windows & Doors in Miami, FL
A single impact window replacement in Miami typically runs $900 to $1,800 installed, depending on size, glazing, and frame finish. A standard impact sliding glass door runs $2,800 to $5,500. Impact entry doors start around $2,200 and French door assemblies can reach $8,000 or more for custom configurations. Full-home replacement on a 1,800 square foot pre-1992 CBS home in Westchester or Kendall generally falls between $18,000 and $35,000, depending on opening count and the manufacturer line you choose.
| Service | Typical Miami Range |
|---|---|
| Single impact window (replacement) | $900 - $1,800 |
| Impact sliding glass door | $2,800 - $5,500 |
| Impact entry door | $2,200 - $4,500 |
| Impact French door assembly | $4,500 - $8,000+ |
| Full-home replacement (pre-1992 CBS, ~1,800 sq ft) | $18,000 - $35,000 |
Lead times, not labor, set the calendar on this work. Impact glass is built to order for Miami’s HVHZ specifications, and that fabrication window is what it is. We quote a fixed price in writing before anything is ordered, and that price does not move. Call (954) 280-4413 for a free, line-item estimate.
We Also Serve Cities Near Miami
Our crews work throughout Miami and the surrounding cities: Miami Beach, Coral Gables, Key Biscayne, and Hialeah. The code requirements, the housing stock, and the salt air problems are the same across Miami-Dade, and we handle them with the same NOA-first discipline everywhere.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Miami
Yes, and there is no exception for small jobs. Miami-Dade County is the nation’s only High Velocity Hurricane Zone, and every window or door you install must carry a Notice of Acceptance number, even a single jalousie replacement in a 1960s concrete block home. A product without an NOA cannot legally be installed in Miami-Dade, and you will not receive windstorm insurance mitigation credits for it. Call (954) 280-4413 and we will confirm the NOA before we quote.
Miami’s HVHZ designation means manufacturers produce impact products with thicker glazing, heavier frames, and specific anchoring systems that are not required anywhere else in Florida. That is custom fabrication, not off-the-shelf inventory, and it adds weeks. Tampa and Orlando fall under standard Florida Product Approval; Miami-Dade requires a separate NOA. We order only after measurements are verified and the price is fixed in writing, because reordering after the fact is what actually destroys a schedule.
In most cases, yes. We remove interior casing carefully, preserve the millwork, and coordinate with your designer or architect before demolition starts. The more important question is whether the rough opening behind that millwork meets Miami-Dade anchoring requirements. In pre-1992 Coral Gables homes, it often does not, which means new subsill bucks and anchor work must happen inside the wall before the new window is set. We handle that sequencing so your trim goes back on clean and the NOA inspection passes.
Miami-Dade homeowners who replace non-impact openings with NOA-approved impact windows typically qualify for significant windstorm premium reductions through Florida’s wind-mitigation credit system. The exact discount depends on your insurer, your home’s construction type, and the percentage of protected openings, but in Miami this credit is more material than in any other Florida market because the exposure is higher and the NOA standard is stricter. We provide the documentation your insurer needs after installation.
Salt-driven corrosion of frames, weep holes, and hardware is the leading cause, especially within a mile or two of Biscayne Bay or the Atlantic. The impact glass itself rarely fails; what fails is the aluminum around it, which corrodes in years rather than decades and breaches the seal. That is why we specify marine-grade anodized or painted finishes on coastal Miami work as a functional necessity. Call (954) 280-4413 if your frames show pitting, chalky residue, or weeping stains.
Call (954) 280-4413 to schedule your free estimate. A live person answers, every hour of every day. We will measure, quote NOA-approved options in writing, and stand behind the work with the Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miami-Dade County with impact windows and doors built for the High Velocity Hurricane Zone.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.