Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Ocean Breeze
Impact window and door work in Ocean Breeze is not a standard suburban install. Nearly every home in this community is a manufactured house sitting between the Atlantic Ocean and the Indian River Lagoon, and most were built between the 1970s and 1990s with window openings sized to proprietary specifications, not stock dimensions. If you own a home in Ocean Breeze Park, you already know what that means: salt air eating aluminum frames from two directions, jalousie windows that stopped sealing a decade ago, and wind-borne debris code requirements that make a trip to the local hardware store useless.
We’re TruePane Windows & Doors, and Impact Windows & Doors is exactly the work we do here. Call (954) 280-4413 and a person answers. We’ll schedule a free estimate, measure every opening twice, and quote you real numbers for impact-rated replacements that fit your home’s actual rough openings.
Why Salt Air in Ocean Breeze Picks Your Materials Before You Do
Here’s the part most window companies will not say out loud. In Ocean Breeze, the cheap spec fails fast. Aluminum frames on original jalousie windows pit and seize at the jambs within five to seven years because the salt air comes from two sides at once. The Atlantic blows in from the east, the Indian River Lagoon from the west, and the St. Lucie Inlet funnels marine air straight down the community. Anything less than marine-grade hardware is a future callback.
We see the same failure pattern on nearly every original-window manufactured home in Ocean Breeze: the louvered sashes warp, the aluminum tracks corrode, the seals fail, and the owner eventually caulks the windows shut or bolts plywood over them before a storm. The windows stop functioning as windows. That’s the moment when a replacement stops being optional.
The material difference is real and it is specific. On an impact window here, we specify stainless steel or hot-dip galvanized fasteners, marine-grade flashing tape at every joint, and frames that can hold up to the dual salt exposure. The coastal-spec version of the same brand’s window costs roughly 15 to 25 percent more than the inland-spec version. That is not an upsell. It is the difference between a 20-year window and a 7-year window in this climate. The cheap spec costs more within a decade, every time.
This is the same reason a vinyl fence post base from a big-box store rusts out in Ocean Breeze in a few summers while a hot-dip galvanized one lasts twenty years. The environment picks the materials. Our job is to make sure you know that before you spend money, not after.
Why TruePane Windows & Doors Is Ocean Breeze’s Preferred Impact Windows & Doors Company
TruePane was founded by Dale Kessler, a second-generation glazier who has spent years in the trade. Dale’s rule has not changed since day one: if the pane is not true, the job is not done. That means we do not shim a window out of square and call it good. We do not use the wrong hardware because it was on the truck. And we do not register one warranty layer and hope you never ask about the other.
In Ocean Breeze, that matters more than anywhere else because the install conditions are harder than almost any other market in Martin County. Non-standard rough openings mean every job starts with careful measurement, not a stock-size assumption. Our technicians have replaced enough jalousie windows in Ocean Breeze Park to know exactly what they will find before the first screw comes out.
Every TruePane job is covered by the Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing before our truck leaves your driveway. The durations are stated on your paperwork, not buried in a drawer. And a live person answers our phone 24 hours a day. Not a call center. Not a voicemail tree. A person who knows our schedule and can look up your file.
We hire local, train apprentices into journeymen, and run background-checked, uniformed technicians on every job. We’re not a franchise playbook. We plan to be in Ocean Breeze in thirty years, and we act like it now.
Our Impact Windows & Doors Services in Ocean Breeze
Hurricane Impact Windows
Most manufactured homes in Ocean Breeze Park did not come with impact-rated glazing. They came with single-pane aluminum jalousies that leak air, let water in, and provide no storm protection. Replacing those with impact-rated windows means custom ordering to your unit’s exact opening dimensions. We handle the measuring, the manufacturer spec, the permit, and the install. Most single-family Ocean Breeze homes run between $700 and $1,100 per impact window opening, depending on the frame material and size.

Impact Sliding Glass Doors
The lagoon-facing rear Ocean Breeze Sliding & Patio Doors take the worst salt and wind exposure of any opening in the home. Original sliding glass doors in 1970s and 1980s manufactured homes were not impact-rated, and many track systems are now corroded or binding. A full impact-rated sliding glass door replacement in Ocean Breeze typically runs $2,800 to $5,500 installed, with stainless rollers and marine-grade hardware included. We also check the threshold flashing, which is where we find most slow leaks.

Impact Entry & French Doors
Front and side entry doors in Ocean Breeze’s manufactured homes are often non-standard widths or have been modified by a previous owner. We measure, then quote an impact-rated door that actually fits, with corrosion-resistant hinges and a properly sealed threshold. French doors facing the water need the most attention: the double-door joint is the first place wind-driven rain gets through, which is why we also offer Ocean Breeze Glass Railing Systems for exposed elevations. Expect $2,500 to $5,000 installed depending on glass area and frame material.

Impact Garage Doors
Manufactured home carports and small garages in Ocean Breeze often have old panel doors that will not meet Martin County wind-borne debris requirements. We install impact-rated garage door panels and brace systems sized for your existing tracks, and we handle the county inspection paperwork. Typical replacements run $1,800 to $4,200 depending on size and whether the track system needs replacement.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Wind Mitigation & Code Compliance in Martin County
Ocean Breeze sits squarely inside Martin County’s wind-borne debris region. That means any permitted window or door replacement must be impact-rated glazing or an approved shutter system. No exceptions for manufactured homes, no grandfathering on original single-pane glass. If you’re replacing, you’re replacing to code.
We handle the permit, the product approval paperwork, and the inspection coordination. The county wants to see that the product carries a Florida Product Approval number and that the installation matches the manufacturer’s published anchoring schedule. We pull the permit on every job. If the inspector needs something corrected, we’re the ones who go back. You don’t chase paperwork.
Trusted Brands We Service in Ocean Breeze
We are an authorized installer for more than a dozen manufacturer lines, and for Ocean Breeze we lean on Cws service in Ocean Breeze and other brands that build specifically for Florida’s coastal code. PGT and CGI dominate the impact-rated market here because both carry the Florida Product Approvals that Martin County requires and both offer frames that stand up to salt air better than cheaper alternatives. For homeowners who want a higher-end look on a lagoon-facing elevation, we also quote Andersen impact lines side by side on paper so you can see exactly what the price difference buys.
We do not sell one brand. We quote two or three, show you the warranty durations in writing, and let you decide with the numbers in front of you. Our crews stock the flashing, stainless hardware, and shims needed for Ocean Breeze’s non-standard openings, which means fewer second trips.
Common Impact Windows & Doors Problems We See in Ocean Breeze Homes
- Corroded jalousie frames that no longer open. The original aluminum tracks on 1970s and 1980s jalousies in Ocean Breeze Park seize from salt exposure within a decade. By the time we’re called, most owners have had at least two windows caulked shut. We replace the entire assembly with impact-rated units, not just the glass.
- Non-standard rough openings that were shimmed instead of measured. Manufactured home window openings do not match stock lumber sizes. When a previous contractor shims a stock window into an opening that’s 2 inches too tall, the flashing tape does not seal correctly, and the first tropical storm soaks the jamb. We measure and order custom or specialty-sourced sizes that fit the actual opening.
- Plywood hurricane covers trapping moisture against the sash. We see this constantly in Ocean Breeze: a homeowner bolts plywood over jalousie windows before a storm, then never removes it. The trapped humidity corrodes the aluminum hinges and tracks faster than open air ever would, and the window becomes permanently inoperable. A proper impact-rated replacement makes the plywood unnecessary.
- Sliding glass door tracks full of sand and salt. Lagoon-side doors in Ocean Breeze collect wind-blown salt and fine sand in the track system. Original rollers are often plastic and disintegrate. We replace with stainless rollers and marine-grade tracks that survive the environment instead of dissolving in it.
A Field Story From Ocean Breeze Park
In Ocean Breeze Park, our crew replaced a 1978 manufactured home’s original jalousie windows with Custom Windows & Doors - Ocean Breeze sized Ply Gem impact-rated double-hung units. The old aluminum frames had corroded at the jambs from decades of lagoon salt, and the homeowner had caulked the louvered sashes shut after two seal failures. We used marine-grade flashing tape and stainless hardware to match the non-standard openings, and the new low-E insulated glass units with argon fill now meet Martin County wind-borne debris code. That’s the job, done right, in this specific place.
Pricing for Impact Windows & Doors in Ocean Breeze, FL
Impact windows in Ocean Breeze run $700 to $1,100 per opening installed, with custom sizing adding 10 to 20 percent to the unit price compared to stock. Impact sliding glass doors run $2,800 to $5,500. Impact entry doors run $2,500 to $5,000. Impact garage doors run $1,800 to $4,200.
What moves the number: the rough opening size (manufactured homes here are almost always non-standard), the frame material, the glass package (low-E and argon cost more but are worth it in this salt-heavy climate), and whether the existing jamb and sill need rot repair before the new unit goes in. The coastal-spec upgrade, marine-grade hardware and flashing, runs about 15 to 25 percent more than the inland spec but is the difference between a window that lasts and a window you replace again in your retirement years.
Call (954) 280-4413 for a free estimate. We quote line by line on paper, with both warranty layers in writing, so you know exactly what you’re buying before you spend a dollar.
We Also Serve Cities Near Ocean Breeze
Our crews run regular routes from Ocean Breeze through Impact Windows & Doors in Ocean Breeze and the surrounding communities. We serve Acacia Villas, Alafaya, Altamonte Springs, and Altoona with the same free estimates and the same Done Right Promise. Scheduling is coordinated from our South Florida office, and crews dispatch locally. Call (954) 280-4413 and we’ll get you on the schedule.
Serving Ocean Breeze, FL - Our Local Coverage Area
We’re based in the Ocean Breeze area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Ocean Breeze
Almost no manufactured home in Ocean Breeze Park has standard window openings. Units built from the 1970s through the 1990s use proprietary rough opening dimensions that don’t match stock lumber sizes. That means most impact window replacements here are specialty-sourced or custom-cut. We measure every opening twice and order the exact size from the manufacturer. The upcharge for custom sizing over stock is typically 10 to 20 percent per unit. Call (954) 280-4413 for a free measurement and an exact quote.
You cannot put impact glass into an old jalousie frame. Jalousie frames are louvered, not sealed insulating units, and they don’t meet Martin County’s wind-borne debris requirements in any configuration. The entire frame and sash assembly gets replaced. We remove the old aluminum frame, correct any rot in the jamb, and install a fully impact-rated unit sized to your existing opening. The good news: once it’s done, the caulk tube and plywood become unnecessary.
The price gap comes from the coastal-spec materials we use here: stainless or hot-dip galvanized fasteners, marine-grade flashing tape, and frames that resist the dual salt-air exposure from the Atlantic and the Indian River Lagoon. Those materials run about 15 to 25 percent more than the inland-spec version of the same window. The inland spec will save you money on day one and cost you a full re-install within a decade. In Ocean Breeze, the cheap spec is the expensive one. Call (954) 280-4413 for a side-by-side quote that shows both numbers.
With an inland-spec aluminum frame and standard fasteners, we see pitting and seal failure start within five to seven years in Ocean Breeze. The salt exposure comes from two directions simultaneously, which is unusual even on the Florida coast, and it accelerates corrosion on aluminum tracks, hinges, and thresholds. With marine-grade hardware and a proper install, a sealed impact unit in Ocean Breeze should hold its seal for twenty years or more. The material specification, not the brand name, is what decides it.
Yes and yes. Ocean Breeze sits in Martin County’s wind-borne debris region, so any permitted window or door replacement must be impact-rated glazing or an approved shutter system. We pull the permit on every job, supply the Florida Product Approval paperwork, and meet the inspector on site. You don’t have to chase county paperwork or figure out the code requirement yourself. Call (954) 280-4413 and we’ll walk you through the full process before any work begins.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Breeze and Martin County with window and door craft that answers the phone and stands behind the work.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After