Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Opa-locka
Impact window and door installation in Opa-locka typically runs $1,800 to $4,200 per opening for Miami-Dade NOA-certified units, with full-home replacements on 1950s CBS houses landing between $18,000 and $48,000 depending on arched openings and framing repairs. That is the honest range, and we tell you the same number over the phone that we put on the written quote. Call (954) 280-4413 for a free estimate. Our Impact Windows & Doors crews have spent years working Opa-locka’s older housing stock, and we know what hides behind those stucco walls before the first cut is made. We serve Opa-locka directly, with dispatch coordinated from our Miami office.
Why TruePane Windows & Doors Is Opa-locka’s Preferred Impact Windows & Doors Company
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That standard has carried through more than years of combined glazing craft in South Florida. Opa-locka homeowners call us because we show up when we say, we wear uniforms, we measure every opening twice, and we register both manufacturer warranty layers in writing before the truck leaves the driveway. No arguing. No fine print that covers neither.
Our background-checked technicians have replaced impact windows on Ali Baba Avenue, Sharazad Boulevard, and throughout the 33054 and 33055 zip codes. We understand that Opa-locka is not Boca or Coral Gables. The houses here are older, the budgets are tighter, and the code requirements are stricter than almost anywhere in the country. We quote manufacturer lines side by side on paper so you see exactly what you are buying. And the Done Right Promise means if it is not done right, we make it right.
Our Impact Windows & Doors Services in Opa-locka
Hurricane Impact Windows
Hurricane impact windows in Opa-locka must carry a Miami-Dade Notice of Acceptance. Not a Florida Building Code approval. An NOA. That is the strictest glazing mandate in the United States, and it applies to every replacement window in the city. We install impact-rated single-hung, double-hung, casement, and picture windows from manufacturers including CGI, PGT, and ES Windows. For the 1950s CBS homes that dominate Opa-locka’s housing stock, we commonly replace failing single-pane aluminum jalousies with fusion-welded impact units using low-E glass and argon fill.
Impact Sliding Glass Doors
Impact sliding glass doors in Opa-locka face a drainage problem most installers ignore. The city’s low elevation and chronically poor drainage mean door sills sit in standing water far longer than they would in neighboring cities. We install impact-rated sliders with reinforced sill pans and proper weep systems, and we check the threshold slope on every job. A slider installed flat or pitched toward the house will wick water into the subfloor within two seasons. We set them right the first time.
Impact Entry & French Doors
Impact entry doors and French doors in Opa-locka carry both a security load and a wind load. We install impact-rated fiberglass, steel, and wood doors with multi-point locking hardware and Miami-Dade NOA-certified glazing. On Moorish Revival properties, arched entryways require custom fabrication. We measure the masonry opening directly and order a curved-top impact door to match the radius rather than squaring off what the architect intended. That is the difference between a door that fits the house and a door that fights it.
Impact Garage Doors
Impact garage doors in Opa-locka are a wind mitigation item more than a convenience. A non-rated garage door is the single largest weak point on a CBS home during a hurricane. We install Miami-Dade compliant impact garage doors with reinforced tracks, heavier gauge steel, and bracing that meets HVHZ requirements. Most Opa-locka homes built before 1994 either have a non-rated door or a rated door with rusted tracks and failed springs. We inspect the full assembly before quoting, so there are no surprises on install day.
Wind Mitigation & Code Compliance
Wind mitigation in Opa-locka is not optional paperwork. It is the difference between an insurance discount and a non-renewal letter. We inspect the roof-to-wall connections, the glazing rating, and the door ratings on your home, then document what passes and what does not. For homes with original jalousie windows or non-impact sliders, we provide a written report showing exactly what must be replaced to qualify for the discount. We pull permits on every job and pass inspections the first time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Opa-locka
We are an authorized installer for more than a dozen manufacturer lines, including CGI, PGT, ES Windows, and ECO Window Systems. Being authorized matters because it means the manufacturer honors the warranty when we install the product. We carry common glass packs, hardware, and rollers locally for Opa-locka customers, which shortens repair windows on existing impact units. When you are facing a failed balancer or a shattered panel on a 1960s CBS house near Sherbondy Village, we can usually have the part in hand within days, not weeks. We quote side by side so you can compare a CGI unit against a PGT unit on the same sheet of paper, in the same light, at the same opening.
Common Impact Windows & Doors Problems We See in Opa-locka Homes
- Rotted buck framing hidden behind stucco. Original single-pane jalousie frames on 1950s CBS homes lose their seal caulking and let standing water from Opa-locka’s poor drainage wick into the interior sill. By the time we open the wall, the wood buck framing is often rotten and needs pressure-treated replacement before any impact unit can go in.
- Arched Moorish Revival openings boarded over with plywood. A contractor tried to force a stock rectangular impact window into a curved masonry rough opening on an Ali Baba Avenue property. It failed within months. We now see repeated instances of arched historic openings sealed with plywood because no custom fabrication was ordered. We fix that properly.
- Non-impact sliding glass doors failing NOA inspection. A previous owner installed a non-rated slider, and now the homeowner cannot get a wind mitigation discount. We replace it with an impact-rated unit that meets Miami-Dade standards and passes inspection.
- Drainage failure at door thresholds. Opa-locka’s flat topography keeps water standing at door sills longer than in most South Florida cities. We regularly replace rotted threshold framing and install reinforced sill pans with proper weep drainage on impact entry and patio doors.
Pricing for Impact Windows & Doors in Opa-locka, FL
Here is where the money actually goes on an Opa-locka impact job. A standard 36-by-48-inch impact single-hung runs $1,800 to $3,200 per opening, installed. Impact sliding glass doors run $4,500 to $9,500 depending on width and glass package. Impact entry doors run $3,800 to $8,200. Impact garage doors run $2,800 to $6,500. Arched custom units on historic Moorish Revival homes run $6,000 to $14,000 per opening and carry a 6-to-8-week fabrication lead time. Rotted buck framing repairs add $300 to $900 per opening depending on how much framing is replaced. We write all of this into the quote before we start. Then we stand behind it.
| Item | Typical Opa-locka Range |
|---|---|
| Impact window (standard rectangular) | $1,800 - $3,200 per opening |
| Impact sliding glass door | $4,500 - $9,500 |
| Impact entry or French door | $3,800 - $8,200 |
| Impact garage door | $2,800 - $6,500 |
| Arched custom impact unit (Moorish Revival) | $6,000 - $14,000 per opening |
| Rotted buck framing repair | $300 - $900 per opening |
Call (954) 280-4413 for a free estimate. We give you a written, line-item quote before any work starts, and we do not change the price once it is signed.
We Also Serve Cities Near Opa-locka
Our impact windows and doors team covers Opa-locka and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you live just outside city limits, call us. We will send a background-checked, uniformed technician to measure your openings and quote the job the same way we do everywhere else: on paper, in writing, with both warranty layers registered before we leave the driveway.
Serving Opa-locka, FL - Our Local Coverage Area
We’re based in the Opa-locka area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Opa-locka
Opa-locka requires a Miami-Dade Notice of Acceptance (NOA) on every impact window and door, which is stricter than the Florida Building Code standard used in neighboring Broward County. An NOA means the entire assembly, including the frame, glass, and anchoring system, has been tested to withstand Miami-Dade’s High Velocity Hurricane Zone requirements. If you bought a window approved only for Broward, it will not pass inspection in Opa-locka. Call (954) 280-4413 and we will confirm your product meets the correct standard before you spend a dollar.
Yes, but it requires custom fabrication, not stock units. We measure the exact radius of each arched rough opening and order a curved-top impact-rated aluminum frame with specialty curved-glass glazing to match. The fabrication lead time is 6 to 8 weeks. We do not square off the arch, and we do not force a rectangular unit into a curved opening. We have done this work on Ali Baba Avenue and Sharazad Boulevard, and the masonry stays intact. Call (954) 280-4413 for a free measurement and written quote.
Because those original single-pane aluminum jalousie frames leaked for decades before anyone noticed, and Opa-locka’s flat drainage keeps water at the sill line longer than in most South Florida cities. The water wicks behind the stucco and rots the wood buck framing hidden inside the wall. We open the rough opening, assess the framing, and write a change order for pressure-treated buck replacement and flashing tape before we install the new impact unit. That is why our quotes include a framing allowance when we know the house still has original jalousies. Call (954) 280-4413 for an exact quote.
Sometimes, yes, and we flag it before it becomes a surprise. On a 1950s CBS home in Opa-locka, we have opened window jambs and found original electrical wiring run through the old jalousie frame pocket. When the rough opening is altered, that wiring must be rerouted to meet current National Electrical Code, and that work requires a licensed electrician. We coordinate the electrician, include the cost in your written quote, and do not touch the wiring ourselves. It gets priced and approved in writing before we start. Call (954) 280-4413 to schedule an inspection.
Yes. Opa-locka’s low elevation and poor drainage mean door sills sit in standing water longer than they do in most surrounding areas. We install impact sliders with reinforced sill pans and proper weep systems, and we verify the threshold slopes away from the interior before we bolt the frame down. Without those provisions, a slider will wick water into the subfloor within two seasons and rot the framing under the door. We include drainage work in every slider quote. Call (954) 280-4413 for a free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Opa-locka and surrounding communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.