Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Southwest Ranches
Impact window and door installation in Southwest Ranches runs $1,900 to $5,800 per opening for custom-sized units, with most full-home replacements landing between $28,000 and $75,000 depending on how many oversized openings the house has. Those are real numbers for this town, not the production-line pricing you’ll see quoted for tract-home neighborhoods east of I-75. Southwest Ranches is Broward County’s only incorporated equestrian community, and the one-acre minimum zoning that defines the town also defines the work: nearly every window and door here is a custom size, built to order, and required to meet High Velocity Hurricane Zone code. If you’re pricing impact windows for an estate home off Griffin Road or Stirling Road, call (954) 280-4413 for a written quote that accounts for the actual openings in your house, not a generic per-window average.
Why TruePane Windows & Doors Is Southwest Ranches’s Preferred Impact Windows & Doors Company
We’ve been on enough Southwest Ranches job sites to know what’s behind the stucco before we open it. This town’s housing stock runs to custom Mediterranean and ranch-style estates built from the 1980s through the 2000s, and the builders who framed those homes were not planning for 2026 impact-load requirements. Header sizing, jamb depth, threshold waterproofing: all of it comes into play when you swap original windows for HVHZ-rated units. Our crews have pulled Broward County permits for enough of these jobs to price allowances into the contract up front, so a rotted sill or undersized header doesn’t become an argument mid-project.
We carry the Done Right Promise on every install. That means the workmanship is guaranteed for 90 days with no paperwork fights and no arguing about who’s responsible. Dale Kessler founded this company in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. The Keystone Standard backs that up. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway. You’ll know exactly what Andersen or ES Windows covers, for exactly how long, on paper.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you can see the difference between a ViewLux unit and an ECO Window Systems unit before you spend a dollar. And when you call our office, a live person answers. Not a voicemail tree, not a callback form. Day or night, seven days a week, there’s a human on the line at (954) 280-4413.
One more thing worth stating plainly: we hire local, we train apprentices into journeymen, and we plan to still be answering the phone in Southwest Ranches thirty years from now. That’s not a marketing line. It’s how a company behaves when it intends to be around for the warranty period and long after.
Our Impact Windows & Doors Services in Southwest Ranches
Hurricane Impact Windows
Most homes in Southwest Ranches were built with oversized picture windows and wide bedroom openings that fall outside production-line impact sizes. That means custom fabrication, which adds lead time and requires precise field measurements. We handle the measurement, the order, the permit, and the install, and we write the framing allowance into the contract before we start. If your original steel or aluminum single-pane windows date to the 1980s, expect the rough opening to need work before the new unit goes in. We price that work in writing, not as a surprise.

Impact Sliding Glass Doors
Sliding glass walls to pool decks are the signature feature of a Southwest Ranches estate, and they’re also the single most common failure point we see. The wetland humidity that rolls in off the Everglades Water Conservation Areas works on seals and thresholds year-round. On a Mediterranean estate off Hancock Road, we found four fogged insulated glass units in an original 1990s slider, with the base track rotted through from moisture. The replacement was a custom-width impact-rated glazing assembly with a fusion-welded frame and new flashing tape at the threshold. We pulled the Broward County permit and priced the rot repair in writing before opening the wall. That’s how we work.

Impact Entry & French Doors
Formal entry systems in Southwest Ranches tend to be wide, tall, and non-standard. A production impact door from a tract-home supplier won’t fit the opening, and forcing one in compromises the wind-load rating. We order custom impact entry and French doors sized to the actual rough opening, with jamb reinforcement engineered for HVHZ requirements. If your entry faces the prevailing storm track, we’ll talk through glass options that balance light, privacy, and impact resistance without fighting the architecture of the house.

Impact Garage Doors
Oversized garages are common here, and so are oversized garage doors, which is fine until a hurricane warning puts the original unrated door in the crosshairs. Impact-rated garage doors for wide openings are almost always custom orders in Southwest Ranches. We measure, order, permit, and install them, including the track reinforcement that code requires. If your home also has a barn or stable with its own large doors, we can handle those as a separate permit line in the same project. No second contractor, no second schedule.

Wind Mitigation & Code Compliance
Broward County’s HVHZ code governs everything we install in Southwest Ranches. The code doesn’t just dictate the glass; it dictates the frame, the fasteners, the flashing, and the load path. Many 1980s and 1990s ranch-style homes here have header sizes that pass inspection for the original windows but fail when the opening gets an impact-rated unit. We inspect framing before we quote, and we write any required header resizing into the allowance section of the contract. When the permit is pulled, the inspector signs off, and the wind mitigation credit documentation gets filed, you’ll have the paperwork to give your insurer. We stand behind it.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southwest Ranches
We’re an authorized installer for more than a dozen manufacturer lines, including, ES Windows, and ECO Window Systems. That matters in Southwest Ranches because custom-sized openings often mean choosing a fabricator that can build to your exact measurements rather than whatever’s in stock at a supply house. We quote manufacturer lines side by side on paper so you can see the difference in glass packages, frame construction, and warranty terms. Andersen’s coastal-rated lines hold up well on west-facing elevations, while ES Windows give us more flexibility on architectural profiles. We’ll recommend what fits your specific openings and your budget, and the quote will show exactly what each line costs. Call (954) 280-4413 and we’ll walk you through it.
Common Impact Windows & Doors Problems We See in Southwest Ranches Homes
- Fogged insulated glass units in 1990s sliders. Wetland humidity attacks seals from the outside while air-conditioned interiors work them from the inside. By the time you see fog between the panes, the argon fill has leaked out and the thermal performance is gone.
- Rotted thresholds and door bases. Sliders and French doors that face lawn irrigation, pool splash, or low spots in the lot collect moisture at the track. On one-acre lots with mature landscaping, drainage patterns shift over decades, and the low corner of the house takes the water.
- Undersized headers on wide openings. The original 1980s framing on a 12-foot slider or a wide formal entry rarely meets the load requirements for a heavy impact-rated unit. We catch this during the pre-quote inspection and write the resizing into the contract up front.
- Production-line impact units quoted for custom openings. Some contractors quote a stock-sized impact window and plan to shim the difference. That voids the wind-load rating and fails inspection. We order custom units built to the actual rough opening, every time.
Pricing for Impact Windows & Doors in Southwest Ranches, FL
A single custom-sized impact window in Southwest Ranches runs $1,900 to $4,200 installed, depending on the opening dimensions and the manufacturer line. Impact sliding glass doors run $6,500 to $14,000 for a custom-width unit with fusion-welded frame and HVHZ-rated track. A full-house replacement on a typical four-bedroom estate, which may have 18 to 30 openings, lands between $28,000 and $75,000. The wide range comes from opening sizes and framing conditions, not from vague estimating. If you have a barn or stable with large doors, budget an additional $3,500 to $9,000 per structure for permitted impact-rated doors. These prices include the permit, the engineering, and the written allowance for framing repairs that we know this town’s houses often need.
We don’t bid low to win the job and then bill change orders. We inspect first, write the allowances into the contract, and price any surprise in writing before we touch it. Estimates are free. Call (954) 280-4413 and we’ll come out, measure every opening, and give you a line-item quote you can keep.
We Also Serve Cities Near Southwest Ranches
TruePane’s crews work throughout the western Broward corridor and beyond. If you own property in Acacia Villas, Alafaya, Altamonte Springs, or Altoona, we provide the same Impact Windows & Doors service with the same written-fit, permit-pulled process. Our dispatch and scheduling run from our Miami metro office, and our local crews know the back roads and permit offices across this part of South Florida. See our Impact Windows & Doors in Southwest Ranches page for details specific to this town.
Serving Southwest Ranches, FL - Our Local Coverage Area
We’re based in the Southwest Ranches area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Southwest Ranches
Because the openings are almost never production sizes. Southwest Ranches’ one-acre equestrian zoning produced custom estate homes with wide sliders, oversized picture windows, and formal entry systems. Stock impact units from a supply house won’t fit, so every window and door is a custom fabrication order, which adds four to eight weeks of lead time before installation. Weston and Pembroke Pines have tract-home subdivisions where three or four standard sizes cover most of the houses; that’s simply not the case here. Call (954) 280-4413 and we’ll give you a realistic timeline for your specific openings.
You can sometimes replace just the insulated glass unit, but on a 1990s slider in Southwest Ranches, the frame and threshold have often taken as much moisture damage as the glass. If the track is rotted or the frame is out of square, replacing only the glass leaves you with a door that still binds, still leaks, and still fails wind-load testing. We’ll inspect the frame before recommending anything. If a glass-only replacement makes sense, we’ll quote it. If the frame needs to go, we’ll tell you that too, with the reasons in writing.
Yes, often. Broward County’s HVHZ code looks at the structural load path, not just the window. If we open a wall to install a larger or heavier impact-rated unit and find undersized headers, outdated wiring in the rough opening, or missing anchor straps, the inspector will require those brought up to current code before signing off. We price these as written allowances in the contract, so the cost is visible from the start. You won’t get a call mid-project asking for more money to fix something we should have found before we started.
Yes. A working barn or stable is a separate structure under Broward County code, and large barn-style sliding or swing doors are treated differently from residential entry doors. You’ll need a separate permit line for the agricultural structure, even if the work happens on the same project timeline as the main house. We handle both permits. This is a job combination that’s essentially unique to Southwest Ranches in South Florida, and we’ve done enough of them that the paperwork is routine for our crews.
Target a U-factor of 0.30 or lower and an SHGC of 0.25 or lower on west- and east-facing openings. The Everglades humidity drives condensation risk, so you want a frame material with low thermal conductivity and a warm-edge spacer system in the glass. South-facing openings can go slightly higher on SHGC if you want passive heat in the winter, but in a hurricane zone, the structural ratings matter more than the thermal fine-tuning. We’ll show you the rated numbers for each manufacturer line side by side before you choose.
Get a Written Quote for Your Southwest Ranches Home
If you own a home in Southwest Ranches and you’re tired of fogged glass, binding sliders, or windows that wouldn’t pass a wind inspection, call us. We’ll send a background-checked, uniformed technician to measure every opening, inspect the framing, and put a line-item quote in your hands. The price you see is the price you pay. Framing allowances are written in. Permits are pulled. Both warranty layers are registered in writing before the truck leaves your driveway.
Call (954) 280-4413 to schedule your free estimate. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Southwest Ranches with impact windows and doors built to order and installed to code.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After