Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Palm Beach Shores
Sliding door replacement in Palm Beach Shores runs $2,800 to $7,500 installed for a standard 6-foot impact-rated unit, and most jobs take two to three days once permits clear. If you’re on Inlet Way, Sahara Road, or anywhere along the narrow Singer Island tip with salt air eating at your track and rollers, we can usually have a technician out within a day or two to measure and quote. Call (954) 280-4413 for a free estimate. We’re TruePane Windows & Doors, and we’ve been setting glass on the Florida coast long enough to know what the salt here does to hardware that wasn’t built for it.
Palm Beach Shores sits on a barrier island with the Atlantic on one side and Lake Worth Lagoon on the other. That means every sliding door on this strip of land takes corrosion from two directions. Not one. We build our Sliding & Patio Doors work for Palm Beach Shores around that single fact, because it changes what hardware belongs in the door and what fails if you skip it.
Why TruePane Windows & Doors Is Palm Beach Shores’s Preferred Sliding & Patio Doors Company
We’ve spent enough days working on Singer Island to know exactly what happens to a sliding door that faces the lagoon and not the ocean. It corrodes anyway. Homeowners are consistently surprised by that, because the assumption is that only oceanfront glass takes the beating. That’s not how salt air works on a two-mile-long barrier island. The Intracoastal spray pushes fine, salt-laden air across the entire width of Palm Beach Shores, and the west-facing doors on the lagoon side fail almost as fast as the east-facing ones. That’s why we spec marine-grade stainless hardware and heavy-duty anodized frames on every sliding door we install here, regardless of which side of the building it faces.
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That’s not a slogan for us. It’s the standard our technicians work to on every single job in Palm Beach Shores, whether it’s a patio slider on Inlet Way or a panoramic system on a condo overlooking the lagoon. We’ve built our reputation in Palm Beach County by doing the work right the first time and standing behind it in writing. The Done Right Promise and The Keystone Standard mean both manufacturer warranty layers get registered before the truck leaves your driveway, durations stated, no arguing later. We hire local, train apprentices into journeymen, and we plan to be answering the phone in thirty years when a call comes in from Palm Beach Shores about a door we installed in 2026.
You call us, a live person answers. Not a voicemail tree, not a callback form. That’s true at 2 p.m. and 2 a.m. Our technicians are background-checked and uniformed, they measure every opening twice, and they put manufacturer quotes side by side on paper so you see exactly what you’re buying. We’re an authorized installer for more than a dozen lines including PGT, CGI, and Ply Gem. When you call for an estimate in Palm Beach Shores, you’ll get a square deal on paper, not a number that changes when the crew shows up.
Our Sliding & Patio Doors Services in Palm Beach Shores
Patio Sliding Doors
A standard patio slider in Palm Beach Shores typically runs $2,800 to $5,200 installed, depending on size and impact rating. The mid-century cottages and 1960s and 1970s condos that dominate this town often still have their original aluminum sliders, and those frames are usually pitted beyond saving by now. We replace the whole unit, rebuild the rough opening when rot has set in (and it usually has, given the salt air), and set the new door in a marine-grade frame with stainless rollers. The door should glide with two fingers after we leave. If it doesn’t, we’re not done.

Panoramic Sliding Systems
For homeowners on the ocean or lagoon side who want wide, open views, panoramic sliding systems in Palm Beach Shores run $6,000 to $12,000 and up, depending on panel count and glass package. These are the multi-panel doors that open entire walls. Given the wind-load requirements on this barrier island, you can’t shortcut the engineering on a panoramic system. The frames have to carry hurricane design pressures across a wide span, and the track system has to handle salt sand without binding. We spec PGT and CGI panoramic lines with stainless hardware, and we register every warranty layer before we leave.

Heavy-Duty Sliding Doors
Heavy-duty sliders for Palm Beach Shores typically cost $3,500 to $7,000 installed. These are the doors that hold up to daily use on a terrace or pool deck, with reinforced frames and oversized stainless rollers that don’t grind to a stop when wind-driven sand gets in the track. On Inlet Way, we once pulled a first-generation aluminum slider that had pitted so badly the jamb screws tore out of the aluminum during removal. We rebuilt the rotted rough opening with pressure-treated lumber and flashing tape, then set a heavy-duty unit with a marine-grade anodized frame. The lagoon-side door had corroded nearly as fast as the neighbor’s ocean-facing patio door. That job taught us exactly what Palm Beach Shores salt air does to metal, and we’ve never forgotten it.

Pocket & Barn Doors
Interior pocket and barn doors in Palm Beach Shores cost $1,800 to $4,500 installed. The issue here isn’t wind load, it’s humidity. Salt-laden, humid air works its way into wall cavities, and budget pocket door frames warp and bind within a few years. We use kiln-dried framing and hardware rated for coastal humidity, and we set the tracks square so the door doesn’t drift or scrape. If you live in one of the older cottages off Jasmine Drive or Sahara Road, a properly hung pocket door can reclaim wall space in a way that changes how a small room works.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach Shores
We’re an authorized installer for PGT, CGI, and Ply Gem, among more than a dozen manufacturer lines. We stock common replacement parts and hardware for Palm Beach Shores jobs locally, which means when a roller fails or a lock set corrodes, you’re not waiting two weeks on a shipping delay. When we quote sliding doors in Palm Beach Shores, we show you the manufacturer options side by side on paper, with the wind-load ratings and warranty durations stated. You see exactly what you’re buying and what it’s rated to withstand. A live person answers the phone 24/7 if you have questions about a brand or a quote.
Common Sliding & Patio Doors Problems We See in Palm Beach Shores Homes
- Wind-driven salt sand in the tracks. The same ocean breeze that makes Palm Beach Shores desirable also drives fine, abrasive sand into sliding door tracks. Rollers grind through it and shatter within three to five years if they’re not stainless and the track isn’t designed for this environment.
- Lagoon-side corrosion that surprises homeowners. West-facing doors overlooking Lake Worth Lagoon corrode nearly as fast as oceanfront units because Intracoastal spray pushes salt-laden air across the entire island. Non-marine hardware fails within two seasons, which means locks stick, rollers seize, and frames develop pinhole corrosion that looks minor and isn’t.
- Non-impact sliders bowing inward under wind load. Palm Beach County’s coastal wind zone demands impact-rated glazing to meet Florida Building Code. Older, non-impact sliders on terrace levels can bow inward during hurricane-force winds, and when the seal fails, water intrusion starts. If your door is original to a 1960s condo, it almost certainly doesn’t meet current wind design pressure requirements.
- Rotted rough openings hiding behind old aluminum frames. In the 1950s through 1970s housing stock that dominates Palm Beach Shores, we regularly find the wood around sliding door openings has rotted from decades of salt-saturated air working through failed flashing. Replacing the door means rebuilding the opening first, then setting the new unit. A cheap quote that ignores that step will fail inspection and leak within a season.
Pricing for Sliding & Patio Doors in Palm Beach Shores, FL
A typical sliding door replacement in Palm Beach Shores runs $2,800 to $7,500 installed for a standard patio slider, with heavy-duty and panoramic systems ranging from $6,000 to $12,000 or more depending on panel count and glass package. What moves the price is impact rating, marine-grade hardware, and whether the rough opening needs structural repair, which it often does in homes built between the 1950s and 1970s. A compliant quote includes the permit, the product rated for Palm Beach County’s coastal wind zone, stainless or marine-grade hardware, flashing and rough opening remediation, and both warranty layers registered in writing. A cheap quote leaves some or all of that out, and you find out at inspection or when the storm hits. Call (954) 280-4413 for a free, line-item estimate. No surprise lines on the bill, no second appointment left hanging.
We Also Serve Cities Near Palm Beach Shores
If you’re in Acacia Villas, Alafaya, Altamonte Springs, or Altoona, our crews serve those areas too. The same coastal building conditions apply across this stretch of Palm Beach County, and a live person answers the phone 24/7. Call (954) 280-4413 to schedule a free estimate.
Serving Palm Beach Shores, FL - Our Local Coverage Area
We’re based in the Palm Beach Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Palm Beach Shores
Sliding doors in Palm Beach Shores must meet Palm Beach County’s coastal wind zone design pressures, which typically require impact-rated glazing tested to withstand wind-borne debris and sustained hurricane-force winds. A compliant door carries a design pressure rating stated on the product label, and the permit application has to reference that rating. We spec PGT and CGI impact-rated units with marine-grade frames for this specific wind zone. Call (954) 280-4413 and we’ll tell you exactly what rating your opening requires and which doors meet it.
In most Palm Beach Shores homes built in the 1950s through 1970s, the existing aluminum frame is already corroded, pitted, or out of square, and retrofitting new impact glass into it does not satisfy Florida Building Code or Palm Beach County’s wind-load requirements. The frame has to be structurally sound and properly anchored, and most first-generation frames on Singer Island simply aren’t. We evaluate every opening and tell you straight whether a frame is salvageable or needs full replacement.
A compliant sliding door permit in Palm Beach Shores requires a product with a design pressure rating that meets the coastal wind zone, proper anchoring to a structurally sound rough opening, and an inspection after installation. If the rough opening has rot from decades of salt exposure, which is common here, the remediation work has to be done before the door goes in and before the inspector signs off. We pull permits, schedule the inspection, and make sure the paperwork is complete before we walk off the job.
If your sliding door was impact-rated and installed with permits and inspections documented, your insurance carrier has a much harder time denying a claim for wind damage or water intrusion after a storm. The product rating, the permit record, and the installation photos all tell the insurer the door met code when it was set. If the door was never permitted or the rating can’t be documented, you’re fighting an uphill claim. We register both manufacturer warranty layers and provide you with the paperwork that documents compliance.
Lagoon-facing sliding doors in Palm Beach Shores fail nearly as fast as oceanfront units because the town sits on a narrow barrier island with salt water on both sides, and the prevailing winds push salt-laden air off Lake Worth Lagoon directly onto west-facing doors. The corrosion isn’t as visible as ocean spray, but it works on hardware, seals, and frames just as hard. Marine-grade stainless hardware and anodized frames are the only long-term answer. Call (954) 280-4413 for a free estimate on a door that’s actually built for this island.
If you’ve read this far, you probably have a sliding door in Palm Beach Shores that’s binding, corroding, or just old enough to worry about. We measure twice, quote manufacturer options side by side on paper, and register both warranty layers before the truck leaves your driveway. Call (954) 280-4413 to schedule your free estimate. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Beach Shores with impact-rated sliding and patio doors since 2008 through a heritage of craft and community commitment.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After