Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Palm Springs
Window installation in Palm Springs means replacing 1950s and 1960s jalousie windows with code-compliant impact units, and most full-frame jobs here run $850-$1,400 per opening depending on product line and rough opening condition. If you live in a CBS ranch near Lakewood Road or Greenbriar Drive, you’re likely sitting behind original louvered glass that cannot legally be retrofitted for wind load. Our crews know these houses, know the Village’s inspection expectations, and quote the work honestly. Call (954) 280-4413 for a free estimate on window installation in Palm Springs, and we’ll walk your openings with you before you spend a dime.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Window Installation Company
We started as a glazier’s shop, not a sales operation, and that difference shows up on a Palm Springs jobsite. Dale Kessler built Window Installation around a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. The crew that comes to your Palm Springs home works background-checked, in uniform, and measures every opening twice. We register both manufacturer warranty layers in writing before the truck leaves your driveway. That is The Keystone Standard, and it applies to every job from a single failed unit to a full house of impact glass.
Palm Springs homeowners have a specific set of frustrations with window contractors: no-shows, vague quotes, and work that does not pass the Village’s wind-load audit. We hear it on first calls. That is why we quote manufacturer lines side by side on paper, state permit steps up front, and never leave a second appointment hanging. Most jobs finish in a single visit. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. That matters when you have a boarded-up opening after a storm or a failed rough opening inspection at 4:30 on a Friday.
Our Window Installation Services in Palm Springs
We install and replace windows for homeowners across Palm Springs, with most work centered on full-frame replacement of original aluminum or jalousie units. Here are the projects we handle most often in this area.
Casement Windows
Casement windows dominate our Palm Springs referrals, and with good reason. They seal tightly against wind-driven rain, which matters at the 140-150 mph design wind speeds this village faces under ASCE 7. On a 1962 CBS ranch in the Lakewood neighborhood, our crew pulled out a wall of original louvered jalousies and the corroded aluminum frames around them, then set fusion-welded impact-rated casement units with Deep South low-E insulated glass and flashing tape over the buck before the inspector came through for the required wind-load audit. The owner had already failed a roof permit at final because those old units were never listed on an earlier window swap. Casement windows in Palm Springs typically run $900-$1,400 per opening installed, depending on size and product approval requirements.

Fixed & Picture Windows
Fixed and picture windows make sense in Palm Springs living rooms where ventilation is handled elsewhere and the priority is a clean sightline to a backyard. The old single-pane aluminum picture windows in these 1955-1975 CBS homes leak conditioned air constantly. We replace them with impact-rated fixed units that carry Florida Product Approval numbers the Village inspectors will ask to see. Expect $700-$1,200 per window for standard sizing. Custom widths run higher, but we quote the line item before any work begins.

Single & Double Hung Windows
Single and double hung windows in Palm Springs ranches are often the easiest transition from old jalousies because the rough opening widths suit standard sizes. But here is what separates a compliant install from a cheap one: the original buck and rough opening flashing on these concrete block homes rarely meets current wind-load criteria. We do full-frame replacement, removing the old buck, installing new flashing tape, and setting the new unit plumb and square before trim. Single hung units run $750-$1,100 per opening here, double hung $850-$1,250. Both carry the same impact ratings and warranty registration as our higher-end lines.

Awning Windows
Awning windows work well over kitchen sinks and in bathrooms across Palm Springs, where the old jalousies let in bugs, moisture, and outside noise. They hinge at the top and shed rain even when open, a practical feature for a village that gets afternoon thunderstorms from June through October. Expect $650-$950 per awning unit on typical CBS openings. We stock parts locally and can turn most awning window replacements around in a single visit.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We are an authorized installer for more than a dozen manufacturer lines, and for Palm Springs homeowners the ones that matter most are, PGT, and ES Windows. Andersen brings a documented product approval trail that Palm Springs inspectors recognize immediately. PGT builds impact-rated units tested for the exact wind speeds this area faces. ES Windows gives you an architectural aluminum look without giving up the Miami-Dade or Florida Product Approval paperwork. We stock local parts for these lines so warranty service or re-glazing does not stall for weeks. We quote them side by side on paper so you see exactly what you are buying and what each option costs before you commit.
Common Window Installation Problems We See in Palm Springs Homes
- Original jalousie windows that cannot be made impact-resistant. We regularly replace entire walls of louvered glass in Palm Springs because there is no retrofit kit that brings a jalousie into compliance with Florida Building Code wind-load requirements. Any contractor who tells you otherwise is selling something that will fail inspection.
- High humidity and salt air accelerating frame corrosion. Even at 12 miles inland, Palm Springs gets enough coastal moisture to oxidize aluminum frames faster than drier inland areas. We see vinyl seals failing on insulated glass units that look fine from the street but are fogging between the panes by year eight or nine.
- Unpermitted window swaps caught during unrelated inspections. The Village of Palm Springs runs its own building department, and inspectors routinely flag unpermitted window replacements when they come through for roof permits or additions. Homeowners who swapped jalousies for non-impact units years ago now face mandatory full-frame upgrades and correction permits.
- Insert retrofits that leave the original buck behind. Some contractors try to save labor by fitting a new window inside the old frame on these 1950s-1970s CBS openings. The result is a unit that will not pass the Village’s wind-load audit and generates a corrective teardown. We pull the old buck, flash the rough opening properly, and set the new frame square the first time.
Pricing for Window Installation in Palm Springs, FL
Window installation in Palm Springs runs $650-$1,400 per opening for full-frame impact-rated units, with most three-bedroom ranch homes landing between $9,000 and $18,000 when every original window is replaced. Casement windows cost more than fixed picture windows because of the hardware and tighter tolerances. Awning windows sit at the lower end of the range. The variables that move your number: opening width, product approval ratings on the specific glass, rot or corrosion repair at the rough opening, and whether you remove and replace stucco returns. We give written line-item quotes with no surprise charges on the bill and no change orders unless you request a change. Call (954) 280-4413 and we will schedule your free estimate.
We Also Serve Cities Near Palm Springs
Our crews serve Palm Springs and several nearby communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are just outside the village line and dealing with the same aging CBS housing stock, the same wind-load requirements, and the same inspection pressures, call us. We schedule Palm Springs-area work every week and can route your estimate alongside existing jobs.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Palm Springs
No. Original jalousie frames cannot be reused for impact-rated glazing under Florida Building Code. The louvered hardware, frame depth, and glass retention methods do not meet wind-load requirements, and the Village of Palm Springs building department will reject any permit application that tries. Full-frame replacement is the only compliant path. Call (954) 280-4413 and we will show you exactly what a compliant job includes and what it costs.
Most Palm Springs homes fall under a design wind speed of 140-150 mph under ASCE 7, which means impact-rated windows tested to those pressures or beyond. The Village inspector will ask for Florida Product Approval documents showing the specific unit is approved for your wind zone. We pull those approvals for you as part of the permit package. Call (954) 280-4413 and we will verify your exact address against the current wind map.
You will likely need a correction permit and a full-frame impact retrofit on the unpermitted windows. Palm Springs inspectors flag window replacements done without permits when they come through for unrelated work like roof permits or additions, and the correction process moves faster when a contractor who knows the Village’s expectations handles the paperwork and the install. Call (954) 280-4413 for a free estimate on bringing your openings into compliance.
Keep the permit record, the final inspection approval, and the manufacturer’s Florida Product Approval documents together. Many insurers in Palm Beach County ask for exactly this paperwork to apply a wind mitigation discount. We register both warranty layers in writing and provide the product approval documents with every impact window job in Palm Springs. Call (954) 280-4413 and we will walk you through what to send your agent.
Yes. Palm Springs runs its own municipal building department, and window replacement requires a permit regardless of how many openings you are doing. A single failed unit still needs a permit, an inspection, and product approvals on file. We handle permits and inspections on every job, from one window to a whole house. Call (954) 280-4413 for an exact quote on your project.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After