Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Port Salerno
Port Salerno Window Replacement means working against salt air, 150+ mph wind zones, and housing stock that predates modern impact codes by decades. A standard inland window won’t hold up here. The frame, the hardware, the sealant, the glass package, the permit path all have to be specified for a saltwater harbor environment. TruePane Windows & Doors has done that work on homes along the Manatee Pocket, off Salerno Road, and through the older CBS neighborhoods that make up most of Port Salerno. Call (954) 280-4413 and we’ll put a live person on the line to schedule your free estimate.
Why TruePane Windows & Doors Is Port Salerno’s Preferred Window Installation Company
We’re a second-generation glazier operation, founded by Dale Kessler in 2008, with roots running many years deep in South Florida trade work. Port Salerno homeowners don’t get a franchise playbook from us. They get background-checked, uniformed technicians who measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway.
That last part matters more here than most places. A window installed in Port Salerno is subject to conditions that void warranties fast if the product isn’t specified correctly. We carry authorized installer status for PGT, CGI, CWS, and more than a dozen other manufacturers, and we know which lines hold up to harbor air and which ones don’t. The Done Right Promise backs every job. If it isn’t done right, we make it right. No paperwork, no arguing.
Dispatch for Port Salerno is coordinated from our South Florida metro office, with crews that work the Manatee Pocket-side streets regularly. We know the difference between a 1960s CBS home off Salerno Road and a newer waterfront build, and we quote accordingly. A live person answers every call, 24/7.
Our Window Installation Services in Port Salerno
These are the window types we install most often in Port Salerno, and the local conditions that make each one worth a close look.
Casement Windows
Casement windows are the workhorse for Port Salerno’s wind zone. They seal on all four sides with compression gaskets, which matters when a tropical system is driving rain sideways off the St. Lucie Inlet. In the older CBS homes that dominate this community, replacing original jalousie windows with Impact Windows & Doors - Port Salerno rated casements is the single biggest structural upgrade most homeowners can make. Expect a quality casement installation in Port Salerno to run $900 to $1,800 per opening, depending on size and impact rating.
Fixed & Picture Windows
Fixed and picture windows are where you get the view across the Manatee Pocket without compromising wind-load performance. A properly specified fixed impact unit carries heavy DP ratings, and because there are no moving parts, there’s less hardware to corrode in salt air. That said, the frame and sealant still have to be marine-grade. Aluminum frames on the Pocket side oxidize at weep holes within 8 to 10 years if they aren’t. Installation for fixed units typically runs $700 to $1,500 per opening in Port Salerno.
Awning Windows
Awning windows hinge at the top and open outward, which lets you keep ventilation during light rain without pulling water into the house. On Port Salerno’s older frame and CBS homes, awning windows are a practical retrofit where floor plans call for high, horizontal openings. The hardware needs stainless steel, not standard zinc, or the harbor air will eat it inside a decade. Budget $850 to $1,600 per opening for impact-rated awning windows installed.
Single & Double Hung Windows
Single and double hung windows remain common in Port Salerno’s more traditional homes, but we recommend them selectively. The double-hung design creates more moving parts and more potential air-infiltration points in a salt-laden wind zone. Where homeowners want the look, we spec fusion-welded frames, stainless balances, and tilt-in sashes with reinforced meeting rails. Installed impact-rated double hungs in Port Salerno generally run $1,000 to $2,200 per opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Port Salerno
We’re authorized installers for PGT, CGI, and CWS, along with Ply Gem. That matters in Port Salerno because not every manufacturer line is built for a saltwater harbor environment. We quote side by side on paper so you see exactly what you’re buying, and we stock the local parts and flashing components that keep a Port Salerno installation moving without waiting on a distributor truck from Orlando.
Explore the full scope of what we do on our Window Installation service page, and see how we approach this work across the broader Port Salerno area.
Common Window Installation Problems We See in Port Salerno Homes
- Oxidized aluminum frames at weep holes and lower corners. Homes along the Manatee Pocket get direct salt spray that pits aluminum frames within 8 to 10 years, a failure that takes decades inland. The corrosion weakens the frame, lets water behind the stucco, and shortens the window’s life by half.
- Original jalousie and single-pane aluminum sliders. Most of Port Salerno’s core housing stock dates from the 1950s through the 1970s. Those original windows don’t meet current Martin County wind-load or impact requirements, and every storm season is a gamble with them in place.
- Fogged glass from failed IGUs. Marine humidity works its way into double-pane seals, delaminates them, and leaves homeowners with fogged glass and lost argon or krypton. The insulating value drops to near zero, and the only real fix is replacement.
- Water intrusion around improperly flashed openings. Port Salerno gets horizontal rain driven off the inlet. Without marine-grade flashing tape, backer rod, and sealant at every jamb, water finds its way into the wall cavity and starts rot or mold behind the drywall.
Pricing for Window Installation in Port Salerno, FL
Window installation in Port Salerno runs $700 to $2,500 per opening for most residential work, with impact-rated casements, picture windows, and awnings on the lower-to-middle of that range and large double hungs or custom shapes on the higher end. What moves the number: the DP rating required for the opening, glass package, frame material, and whether the existing opening needs repair before the new unit goes in. A full-house retrofit on a 1960s CBS home off Salerno Road typically lands between $9,000 and $22,000 depending on opening count and product selection.
We give fixed pricing with no change orders. The quote is a square deal, in writing, before work starts. Call (954) 280-4413 to schedule your free estimate and we’ll walk the openings with you.
We Also Serve Cities Near Port Salerno
If you live just outside Port Salerno, we handle window installation in Stuart, Hobe Sound, Palm City, and Jensen Beach too. Same crew standards, same warranty discipline, same live person on the phone 24/7.
Serving Port Salerno, FL - Our Local Coverage Area
We’re based in the Port Salerno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Port Salerno
Port Salerno sits in a design wind speed zone of 150+ mph under the Florida Building Code, so replacement windows need a design pressure (DP) rating that matches the specific opening, exposure category, and building height, typically DP 50 or higher for most openings near the Manatee Pocket. The DP number is not an impact rating; impact-rated products are a separate designation, and in most of Port Salerno you’ll need both. Call (954) 280-4413 and we’ll calculate the exact rating your openings require before quoting anything.
Yes, Martin County allows non-impact windows where code-approved hurricane shutters or panels are already in place and remain with the home, but the window itself must still meet wind-load requirements for the opening. The practical tradeoff is that shutters require you to be home and physically install them before a storm, and insurance premium discounts generally only apply to fully documented impact-rated installations. We quote both paths side by side so you can decide with real numbers.
A documented impact-rated window installation typically reduces the windstorm portion of a Martin County homeowners policy by 10 to 40 percent, depending on the carrier, the age of the roof, and whether the entire home is protected. The key word is documented: the insurer wants to see the product approval numbers, the permit, and the final inspection record. We register both manufacturer warranty layers, pull the permit, and make sure the paperwork is in your hands before the final check clears. Call (954) 280-4413 for an estimate and we’ll walk you through exactly what your insurer gets.
A proper Port Salerno quote includes the specific product with its DP and impact ratings stated, stainless steel or corrosion-resistant hardware on every operating unit, marine-grade flashing tape and sealant at every opening, permit and inspection fees listed as a line item, removal and disposal of the old units, and written registration of both manufacturer warranty layers. A cheap quote often prices in standard inland hardware, skips the permit, uses generic flashing, and leaves the warranty registration to the homeowner. The difference shows up in 5 to 8 years when the frame starts pitting at the weep holes.
Aluminum frames on Manatee Pocket-side homes corrode fast because concentrated salt spray from the harbor settles at the weep holes and lower corners where moisture drains, and the chloride content accelerates oxidation that would take decades inland to about 8 to 10 years in Port Salerno. Prevention starts with product selection: Energy-Efficient Windows - Port Salerno built with fusion-welded or marine-grade aluminum with a robust finish, stainless steel hardware, and proper sealant application at every penetration. It also helps to rinse window exteriors with fresh water periodically if you’re directly on the water. We spec for the condition up front instead of replacing cheap frames twice.
Contact TruePane Windows & Doors in Port Salerno
We work the Manatee Pocket-side streets of Port Salerno because we plan to be in South Florida in thirty years. Dale Kessler’s rule hasn’t changed since 2008: if the pane is not true, the job is not done. Call (954) 280-4413 for a free estimate, a straight answer, and a live person on the other end of the line, any hour, any day.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Port Salerno and the surrounding Martin County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.