Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Taft
Window installation in Taft usually means dealing with a 1960s concrete-block ranch that still has its original aluminum windows, and that shapes the whole job. A standard replacement on a home near Orange Avenue or down toward the Taft Vineland Road corridor runs $450 to $950 per opening for energy-code-compliant units, installed and permitted. We schedule Taft work within the week, and the crew that shows up knows this housing stock well enough to flag the jalousie in the utility room before it becomes a surprise. Call (954) 280-4413 for a free estimate with a written line-item scope.
Why TruePane Windows & Doors Is Taft’s Preferred Window Installation Company
TruePane has worked on Taft’s concrete-block ranch homes long enough to know what’s behind the drywall before we open the wall. Dale Kessler built this company on a simple rule: if the pane is not true, the job is not done. That’s why our Taft customers get both manufacturer warranty layers registered in writing before the truck leaves the driveway, plus the Done Right Promise on every install. No paperwork fights. No arguing. Just a square deal.
What sets us apart in Taft specifically is that we don’t treat an inland home like a coastal one. We know the difference between what Orange County’s building division will approve for a 1960s CBS ranch versus what it requires for a new build. Our technicians are background-checked and uniformed, they measure every opening twice, and they quote manufacturer lines side by side on paper so you see exactly what you’re buying. A live person answers our phone 24 hours a day. That means when a Taft homeowner calls at 7 a.m. on a Saturday, they get us, not a regional call center.
Our Window Installation Services in Taft
We install every window type common to Taft’s housing stock. Here’s what most homeowners in this area end up putting in, and why.
Single & Double Hung Windows
Single and double hung windows are the most common upgrade we install in Taft, and for good reason. They fit the proportions of 1950s-1970s ranch homes without awkward framing changes, and modern double hung units give you tilt-in cleaning plus a tighter air seal than those original thin-frame aluminum sliders ever had. A double hung replacement on a Taft CBS home typically runs $500 to $900 per opening, depending on size and glass package.

Sliding Windows
A lot of Taft’s original homes were built with horizontal aluminum sliders that have since corroded at the jamb or lost their thermal break. We replace these with fusion-welded vinyl or aluminum sliders that handle Central Florida’s humidity without sweating or binding. Expect $400 to $800 per slider in Taft’s market, installed with new flashing and a foam-sealed frame.

Fixed & Picture Windows
Fixed and picture windows make the most sense for Taft’s living rooms and front elevations, where a large glass area lets in light without adding moving parts that can fail. We install low-E insulated glass units that cut the heat gain that hits these homes from Taft’s near-daily summer sun. Pricing for a fixed or picture window in Taft runs $350 to $1,200, with the wide range driven by glass size and whether you want impact-rated glazing.

Casement Windows
Casement windows give the best natural ventilation of any operable style, which matters in a community where home cooling costs spike from May through October. We’re also asked about awning windows for Taft homes with wide, low openings that need weather protection during afternoon thunderstorms. Let us know during your estimate if you’re considering either style, and we’ll price them side by side with double hung units so you can compare the real numbers.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Taft
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI, and we carry local stock for Taft jobs so turnaround stays quick. For budget-conscious Taft homeowners we often quote Ply Gem and Simonton alongside premium lines so the comparison is plain on paper. We register both warranty layers on every install, no matter which brand you choose, before we leave the driveway.
Common Window Installation Problems We See in Taft Homes
- Jalousie windows that can’t pass inspection. Taft’s older bedrooms and utility rooms still carry jalousie louvered glass in a surprising share of homes. They can’t be made to pass a Florida Energy Code inspection, and once a permit is pulled for any window job, the county may require all of them replaced. We price that into the scope upfront so there’s no surprise line item.
- Corroded single-pane aluminum frames without thermal breaks. In Taft’s humid summers, thin-frame aluminum windows sweat and corrode at the jamb. The metal conducts heat, the glazing compound fails, and eventually the sashes stick or the seals go. We see it on nearly every original window we pull.
- UV-degraded glazing compound leading to fogged insulated glass. Central Florida’s extreme UV index breaks down cheap glazing compound within a few years. The result is fogged double-pane glass and failed seals, even though Taft has no salt air. It’s the thermal cycling and sun exposure doing the damage.
- Openings set directly into block with no flashing. Many Taft CBS homes have window frames set straight into masonry with no flashing tape behind the flanges. That’s a water intrusion problem waiting to happen. When we strip an opening, we add pressure-treated bucks and lapped flashing before the new frame goes in.
Pricing for Window Installation in Taft, FL
Window installation in Taft runs $350 to $1,200 per opening for standard replacement work, with most mid-size double hung or slider jobs landing between $500 and $900. The biggest cost drivers are frame material, glass package, and whether the opening needs masonry work or new framing. Impact-rated glass adds $150 to $400 per window. If a home has original jalousie or corroded aluminum units that trigger whole-house replacement under code, a full Taft ranch home typically lands between $6,000 and $14,000, depending on window count and sizing. We provide written line-item quotes before any work starts, and the price on the estimate is the price on the bill. Call (954) 280-4413 to schedule your free estimate.
We Also Serve Cities Near Taft
Our window installation crews regularly serve Taft and the surrounding Orange County communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. For more detail on what our Window Installation service covers, see our full service overview.
The Jalousie Problem Most Taft Homeowners Don’t See Coming
Here’s a scenario we’ve handled more than once in Taft. A homeowner calls us to replace a fogged sliding window in the living room. We pull the permit through Orange County’s building division, and the inspector notes the jalousie windows still in place in the back bedrooms. Under current Florida Building Code, those louvered units fail energy compliance and wind-load requirements. Once the permit is open, the inspector can require every non-compliant window in the house to go. That turns a $900 repair into a $7,000 whole-house scope.
We see this coming. We replaced a set of corroded single-pane aluminum sliders on a 1960s CBS ranch off Orange Avenue with impact-rated, low-E double-hung units from Simonton. The original frames were set directly into block with no flashing tape, so we stripped the openings back to masonry, added pressure-treated bucks, and lapped new flashing tape before setting the fusion-welded frames. After inspection, the homeowner saw the jalousie in the utility room had to go too, and we had already priced that into the scope because we know Taft’s stock. That’s the difference between a contractor who has worked this neighborhood and one who hasn’t.
Serving Taft, FL - Our Local Coverage Area
We’re based in the Taft area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Taft
Yes, if any permit is pulled for window replacement, Orange County’s building division requires wind-rated, Florida Product Approved units, even for inland Taft. Central Florida still falls within the state’s wind-borne debris region. You may not need the same high-velocity impact zone ratings as coastal homes, but standard single-pane glass won’t pass a permitted replacement. We quote both impact and non-impact wind-rated options for Taft homes. Call (954) 280-4413 for exact pricing on your openings.
Not automatically, but once a permit is open, an inspector can require all non-compliant windows to be brought up to code. Jalousie units cannot be made compliant. We identify every jalousie on the property during our free estimate so you know the full scope before the permit is pulled. That’s the right way to avoid a surprise. Call (954) 280-4413 and we’ll walk the property with you.
For most Taft ranch homes, fusion-welded vinyl or thermally broken aluminum, both carrying Florida Product Approval, hold up best in Central Florida’s humidity and UV exposure. Vinyl resists corrosion and doesn’t need repainting. Thermally broken aluminum offers slimmer sightlines and good strength for large openings. Wood frames without proper sealing will fight the humidity all summer. We quote both materials on paper so you see the real cost difference for your home.
Fogging between panes means the insulated glass unit’s seal has failed. In Taft, the cause is usually UV degradation of the glazing compound combined with the thermal expansion and contraction of Central Florida’s hot days and humid nights. Salt air isn’t the issue here. Failed seals can’t be repaired, only replaced. We replace insulated glass units in Taft homes regularly, and both warranty layers get registered before we leave.
If your windows are original to a 1950s-1970s Taft home, assume they don’t. Single-pane aluminum, jalousie louvered glass, and any frame without a thermal break all fail current Florida Energy Code. The only way to know for certain is a permit inspection. We assess every window during our free estimate so you have a clear, written answer before any money changes hands. Call (954) 280-4413 to schedule.
If you live in Taft and you’re tired of windows that sweat in the summer, stick when you slide them, or fog up between the panes, call TruePane Windows & Doors. We’ll measure every opening twice, quote the work in writing, and handle the permit and inspection. You’ll know the scope before we start, and the price won’t move after. Call (954) 280-4413 to schedule your free estimate, and ask about our permanent 5% discount for seniors and veterans.
Key Takeaways
- Taft homes commonly carry original jalousie and single-pane aluminum windows that fail Florida Energy Code and wind-load requirements.
- Permitted window replacement can trigger whole-house jalousie replacement, a scope surprise we identify upfront.
- Window installation in Taft runs $350 to $1,200 per opening, with most mid-size jobs between $500 and $900.
- We register both manufacturer warranty layers in writing before the truck leaves your driveway.
- Every job carries The Keystone Standard and the Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Taft and Orange County with window and door installation since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After