Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Franklin Park
Window replacement in Franklin Park almost always comes down to one question: does the new glass meet Hillsborough County’s wind-borne debris code, and can you prove it. Most homes here were built between the 1950s and 1970s with concrete block walls and windows that were never designed to hold up in a named storm. That’s why TruePane treats every Franklin Park estimate as a code-compliance conversation first, not a sales pitch. If you’re wondering what a compliant quote should include, or whether your original jalousies will pass inspection, call (954) 280-4413 and a live person will answer. We’ve worked these blocks long enough to know exactly what the inspector will look for before we ever measure an opening.
Why TruePane Windows & Doors Is Franklin Park’s Preferred Window Replacement Company
Homeowners in Franklin Park tend to ask the same three things when we first meet: Will the windows actually hold in a hurricane? Will you handle the permit? Will the company still be around if something goes wrong? All fair questions, and ones we’ve been answering for a long time. Dale Kessler founded TruePane in 2008, but the craft behind it runs many years deep. Where a lot of outfits treat window replacement as a commodity, we treat it as work that has to be done right the first time, because the code doesn’t give second chances.
When a Franklin Park customer calls, they’re not routed to a regional call center. A live person answers, 24 hours a day, every day of the week. We schedule background-checked, uniformed technicians who measure every opening twice and quote manufacturer lines side by side on paper. And before our truck leaves your driveway, both manufacturer warranty layers are registered in writing. That’s our Keystone Standard, and it’s not a nice-to-have. It’s the way every job ends.
Our Window Replacement Services in Franklin Park
Full Frame Replacement
Full frame replacement means the entire window comes out, down to the rough opening. For Franklin Park’s CBS construction, this is usually the only route when the original aluminum frame has corroded or the jamb was never flashed properly in the first place. We cut out the old frame, correct any opening issues, install the new unit, and flash the perimeter with butyl tape so water and wind pressure stay outside. This is the job where our “if the pane is not true, the job is not done” rule gets tested most.
Impact-Rated Window Replacement
If you live anywhere in Franklin Park, this is the conversation that matters. Hillsborough County sits inside Florida’s wind-borne debris region, and Florida Building Code Section 1609 requires impact-resistant glazing or approved shutter protection on every new and replacement window and door. We install impact-rated units from manufacturers like PGT and CGI, with laminated glass that holds together even when a two-by-four hits it at 34 miles per hour in the Miami-Dade test. A cheap quote that skips this rating will fail inspection and leave you with nothing for your insurance file.
Insert Window Replacement
Insert replacement keeps your existing frame and slips a new sashed unit inside it. It works in Franklin Park when the original frame is still square and structurally sound. Some 1960s and 1970s CBS homes have frames that can take an insert without a fight. If the frame is corroded or out of true, we’ll tell you. We won’t sell you an insert just to lower the bid. We measure twice, show you the options on paper, and let you see what you’re buying.
Energy-Efficient Upgrade
Franklin Park’s original single-pane aluminum windows lose conditioned air all year. In July, the glass itself gets hot enough to throw heat into the room even with the AC running. Low-E glass with argon fill cuts that heat transfer substantially. We quote energy-efficient packages from Andersen, Pella, and Marvin, and we put the performance numbers next to the price so you can see the difference in writing before you spend a dollar.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Franklin Park
TruePane is an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and CWS, which carry approval ratings specific to Florida’s wind-load requirements. That matters in Franklin Park because not every window on a shelf has a Florida Product Approval number. We recommend what meets code and matches your house, not whatever carries the biggest margin. Side-by-side quotes on paper, with both manufacturer warranty layers registered before we leave the driveway.
Common Window Replacement Problems We See in Franklin Park Homes
- Jalousie windows flagged by inspectors. Pull a permit for a sliding door on a 1960s CBS ranch and the inspector will routinely red-tag the surviving jalousies even if they were never part of the job scope. They’re categorically non-compliant with current wind-load standards, so one door replacement becomes a whole-house opening audit.
- Fogged, failed single-pane aluminum frames. The original aluminum windows from the 1960s and 1970s lose their seal, cloud up between the panes, and let condensation sit against the frame. Once the seal goes, the unit fails both energy and wind-debris checks.
- Unpermitted replacement work. Windows that were swapped years ago without a permit leave no documentation trail. After a storm, the insurance adjuster checks for Florida Product Approval numbers and permit records. If neither exists, the damage can be denied even when the window looks intact.
- Cracked stucco around window openings. CBS homes settle over time, and the stucco around old window frames cracks and lets water in behind the wall. Our crews in Franklin Park see this on a lot of the older ranches. We address the flashing and the seal, not just the glass.
Pricing for Window Replacement in Franklin Park, FL
A typical full frame replacement in Franklin Park runs $1,100 to $2,800 per window, including the permit, the tear-out, the new frame, and the finish work. An insert replacement usually falls between $700 and $1,600 per opening. An impact-rated window replacement lands between $1,400 and $3,200 per unit depending on size and manufacturer. Energy-efficient upgrades with low-E glass and argon fill typically add $150 to $450 per window over the base unit cost. Those are the numbers we see on these blocks. We price everything upfront with a written line-item quote, so you know exactly what you’re paying before the work starts. Call (954) 280-4413 to schedule a free estimate.
We Also Serve Cities Near Franklin Park
TruePane handles window replacement work throughout the surrounding communities, from Window Replacement projects in Acacia Villas to full impact-rated upgrades in Alafaya, Altamonte Springs, and Altoona. If you’re near Franklin Park but outside the core blocks, give us a call and we’ll let you know our next available crew day. We work the whole corridor.
Serving Franklin Park, FL - Our Local Coverage Area
We’re based in the Franklin Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Franklin Park
Yes. Franklin Park is inside Hillsborough County’s wind-borne debris region, so Florida Building Code Section 1609 requires impact-resistant glazing or approved opening protection on every new and replacement window and door. A window with a Florida Product Approval number survives the inspection and gives your insurance company something to verify. Call (954) 280-4413 if you want a quote that lists the exact rating on paper.
No. This is the single most common surprise on Franklin Park permit applications. Hillsborough County inspectors routinely flag surviving jalousie windows when any window or door permit is pulled on older CBS homes, even if the jalousies aren’t in the original job scope. The inspector treats them as non-compliant with current wind-load standards and expands the scope to include the whole house. We walked through this exact situation on a 1962 CBS ranch off NW 25th Street, where fourteen original jalousies were red-tagged during a sliding glass door permit. We installed impact-rated double-hung units with fusion-welded frames, low-E glass, and argon fill, flashed the jambs with butyl tape, and the whole opening passed the same-day wind-load inspection. If you’re facing a jalousie problem, call us at (954) 280-4413 before you pull the permit.
You need three things: the permit record, the Florida Product Approval number for every installed unit, and written confirmation that both manufacturer warranty layers were registered. TruePane gives you all three. If you did replacement work in the past without a permit, there’s no documentation. An adjuster can deny a post-storm claim even when the window looks fine from the street. For an exact quote that includes the full documentation package, call (954) 280-4413.
They strip out the permit, the impact-rated glass, the Florida Product Approval documentation, and sometimes the flashing work entirely. The bid looks low until the inspection fails or the insurance claim gets denied. In Franklin Park, a window that doesn’t meet Section 1609 is not a bargain. It is a liability sitting in your wall. A square deal means the rating is on the quote in writing, and the permit is pulled. Call (954) 280-4413 for a quote that holds up to both the inspector and the adjuster.
Almost never. The 1970s aluminum frames in Franklin Park were not designed to carry modern impact-rated sash weight, and the old frame itself will not pass a wind-load check even with new glass in it. Most of these need a full frame replacement with new flashing at the rough opening. Some can take an insert if the frame is structurally sound, but the code is the code. We’ll tell you straight which route applies to your house, and show you the difference on paper. Call (954) 280-4413 to schedule a free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.