Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Pembroke Park
Window replacement in Pembroke Park carries legal requirements most Florida towns don’t have. Because the town sits inside Broward County’s High-Velocity Hurricane Zone, every permitted window must carry a Miami-Dade Notice of Acceptance or approved Florida Product Approval. That certification rule changes which products you can legally buy, and it’s why half-measures with cheap inland windows won’t pass inspection here. We know Pembroke Park’s housing stock, its code requirements, and the installation details CBS construction demands. For a free line-item quote, call (954) 280-4413.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Window Replacement Company
We’ve been setting windows in Broward County long enough to know what salt air does to a cheap jamb. Pembroke Park homeowners have dealt with fogged seals, corroded aluminum tracks, and jalousies that rattle in every afternoon thunderstorm. Our crews work on those exact homes every week. Dale Kessler founded TruePane in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. That means measuring each opening twice, registering both manufacturer warranty layers in writing before our truck leaves your driveway, and standing behind the work for 90 days under our Done Right Promise. No paperwork fights, no arguing. We’re not a franchise playbook, and we don’t disappear when the permit inspector signs off.
Pembroke Park homeowners call us because we explain the HVHZ code plainly, quote manufacturer lines side by side on paper, and show up on time in uniform. We train local apprentices into journeymen, and we plan to still be answering our phone in thirty years. That’s the point of the whole business.
Our Window Replacement Services in Pembroke Park
Most Pembroke Park homes fall into one of four situations. Here’s how we approach each.
Full Frame Replacement
This is the standard fix for Pembroke Park’s 1950s-to-1970s CBS homes. The original window frame gets pulled entirely, the concrete block opening is cleaned and squared, and a new NOA-approved impact unit is set with Tapcon masonry anchors into the block. Full frame replacement is the only legal path when the old unit is a single-pane jalousie or awning window, because those original units can’t meet the 160+ mph design wind-speed requirement. In Pembroke Park, full frame replacement typically runs $900-$2,400 per opening, depending on size, manufacturer, and whether the opening needs structural shimming.
Insert Window Replacement
When the existing frame is square, solid, and not corroded, an insert replacement sits inside it. That saves labor and cost, and it works well for newer homes or older units that were already retrofitted once. Inserts in Pembroke Park run $700-$1,800 per window. The catch is that many original aluminum frames in this town have already corroded at the jamb corners from salt air, so we’ll measure and tell you honestly whether an insert is even viable before we quote it.
Storm Window Replacement
If you’re looking specifically for impact-rated storm protection, you’re in the right town to need it. Pembroke Park sits 4-5 miles from the Atlantic, fully exposed to South Florida’s tropical storm tracks. Our storm window replacements use laminated impact glass with NOA or Florida Product Approval certification, sized for the exact pressure rating your home’s exposure requires. Storm replacement units run $800-$2,200 per window. The range reflects glass thickness, frame material, and whether the opening faces the east wind exposure typical of lots backing up to I-95.
Energy-Efficient Upgrade
Replacing old single-pane aluminum with insulated impact glass doesn’t just meet code. It cuts cooling load in a town where the afternoon sun bakes CBS walls well into October. Homeowners off Park Road and Hallandale Beach Boulevard tell us their AC stops running constantly once the argon-filled Low-E units go in. Energy-efficient upgrade packages in Pembroke Park typically run $750-$1,900 per window. We quote the manufacturer’s energy ratings side by side so you can see the difference in SHGC and U-factor before you spend a dollar.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
We’re authorized installers for more than a dozen manufacturer lines, and we keep a working stock of parts for the brands Pembroke Park homeowners actually have. That list includes Andersen, PGT, and ES Windows, alongside ECO Window Systems for specific performance needs. When you need a sash replaced on an Andersen unit or a PGT impact pane set in a CBS opening, we don’t order from a far-off warehouse and hope. We know which NOA approvals each line carries for Broward County, and we register both warranty layers in writing before our truck leaves your driveway.
Common Window Replacement Problems We See in Pembroke Park Homes
- Failed seals on original insulated glass units. On a 1960s CBS home off Park Road, our crew pulled original single-pane aluminum jalousies and found every insulated glass unit’s seal had failed. The argon was gone, and the glass was nearly useless for both storms and I-95 noise. This is the norm in Pembroke Park, not the exception, because high humidity and afternoon thunderstorms accelerate seal failure on non-impact aluminum units.
- Corroded aluminum frames at jamb and sash corners. Salt air does to aluminum what years of garden neglect does to a gate hinge. We routinely see frames with pinhole corrosion within 8-10 years of install, letting water into the CBS wall cavity and staining interior drywall around the rough opening.
- Improper anchors into concrete block. Crews that treat Pembroke Park like a wood-frame town use standard screws instead of Tapcons. The frames shift under wind load, the flashing tape seal breaks, and water gets behind the stucco. It’s a silent failure that shows up as peeling paint and efflorescence long before you can see it.
- Windows that howl at I-95. Lots backing up to the corridor get constant ambient noise. Single-pane glass does nothing to stop it. Impact laminated glass has a sound-attenuation rating that meaningfully cuts highway drone, which is a genuine local selling point alongside the storm protection.
Pricing for Window Replacement in Pembroke Park, FL
Here are honest ranges for Pembroke Park’s market. Full frame replacement runs $900-$2,400 per opening. Insert replacement runs $700-$1,800. Storm-rated impact units run $800-$2,200. Energy-efficient upgrades run $750-$1,900. The price gap between a coastal-spec job and an inland-spec job is real: stainless or hot-dip hardware, marine-grade frame finishes, and NOA-certified glass cost more upfront than the cheap inland version. But the cheap spec corrodes within a decade, and then you pay full replacement again. We quote fixed pricing with no change orders, and we pull permits and pass inspections on every permitted job. Call (954) 280-4413 for an exact quote. Estimates are free.
We Also Serve Cities Near Pembroke Park
Pembroke Park is our focus for this page, but our crews also serve Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those areas and need the same HVHZ-compliant Window Replacement service, call and we’ll schedule a measurement. For details on our full Pembroke Park coverage area, see Window Replacement in Pembroke Park.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Pembroke Park
You can’t repair them because they’re non-compliant with current 160+ mph design wind-speed requirements. Any repair attempt on a non-compliant unit leaves you with a window that fails the HVHZ code, and no permit will be issued for repair work on glass that can’t meet the minimum pressure rating. Full replacement with NOA-approved impact units is the only legal path for most of Pembroke Park’s original jalousies and awnings. Call (954) 280-4413 and we’ll confirm what your specific openings require.
Yes. The requirement is driven by wind-speed design zones, not flood zones. Pembroke Park falls inside the High-Velocity Hurricane Zone, so every permitted window and door replacement must carry a Miami-Dade Notice of Acceptance or Florida Product Approval. Flood zone status doesn’t change that. We register both warranty layers in writing on every impact install, so there’s no ambiguity about coverage.
Fogging between panes means the insulated glass unit’s seal has failed, allowing humid Florida air inside and letting the argon or other inert gas escape. Pembroke Park’s high humidity and frequent afternoon thunderstorms accelerate that failure, especially on older aluminum-framed units. Once the seal is gone, the glass loses most of its insulative value and you’ll see condensation that won’t wipe off. The fix is replacement, not repair. Call (954) 280-4413 for a measurement and a written quote.
Yes, meaningfully. The same laminated glass that satisfies HVHZ hurricane code also cuts highway drone because the laminate layer absorbs sound energy that single-pane glass lets straight through. For Pembroke Park homes backing up to I-95, we quote sound-attenuation ratings alongside storm ratings so you see both numbers. It’s the one upgrade that solves two local problems at once.
Everything about the anchoring. CBS walls are solid concrete block, so frames must be set with Tapcon masonry anchors into the block. Crews used to wood studs often use standard screws and then the frames shift under wind load. We drill into block daily, and we flash and seal every rough opening for direct-hit rain exposure. If a crew can’t explain Tapcon anchoring to you, call (954) 280-4413 for a second opinion.
If you’re in Pembroke Park and you want a written, line-item quote for window replacement that actually complies with Broward County’s HVHZ code, call us at (954) 280-4413. A live person answers 24 hours a day, seven days a week. We’ll schedule a measurement, pull the permit, and set your windows true.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.