Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Treasure Island
Window replacement on Treasure Island, FL means meeting Florida Building Code wind-borne debris requirements on every single opening, no exceptions. Most homes here need impact-rated, marine-grade units with valid Florida Product Approval numbers, and the permitting and inspection steps are stricter than anything you’ll find a few miles inland. We’re TruePane Windows & Doors, and we handle full-frame replacement, impact upgrades, and storm window work across Treasure Island with crews who know exactly what Pinellas County inspectors look for on a barrier island. Call (954) 280-4413 and you’ll get a live person, not a voicemail tree.
Why TruePane Windows & Doors Is Treasure Island’s Preferred Window Replacement Company
We’ve worked on enough Treasure Island homes to know what the salt air does to aluminum frames over two or three decades. The dual exposure from the Gulf of Mexico on the west side and Boca Ciega Bay on the east means hardware pits out faster here than anywhere else in Pinellas County, and homeowners who’ve lived on the island for twenty or thirty years notice it first in the sashes that won’t seat cleanly. Our Window Replacement team has replaced original jalousie units on 1960s CBS homes off Paradise Boulevard, fixed leaking rough openings on Gulf-front condos near Sunset Beach, and installed impact-rated double-hungs on mid-century ranches along Isle of Palms.
Background-checked, uniformed technicians measure every opening twice before quoting anything. Dale Kessler founded the company in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. We register both manufacturer warranty layers in writing before the truck leaves your driveway, and every job carries our Done Right Promise. No paperwork fights, no arguing about what was promised. A square deal, in writing.
Our Window Replacement Services in Treasure Island
Full Frame Replacement
Full-frame replacement is the default on Treasure Island when the original jalousie or louvered windows from the 1950s through 1970s are still in place. Those units cannot be retrofitted to meet wind-borne debris compliance, period. The whole assembly comes out, the rough opening gets inspected and re-flashed, and a new impact-rated unit goes in with proper anchoring. In Treasure Island this is usually a mandatory job, not an optional upgrade, especially now that Citizens Insurance wind-mitigation re-inspections are flagging non-compliant openings aggressively.
Insert Window Replacement
When the existing frame is still square and solid, an insert replacement slips a new window into the old opening without disturbing interior trim or exterior stucco. On Treasure Island we see this work often on 1980s and 1990s homes where the original aluminum frames were marine-grade but the glass and seals have failed. It’s less invasive than full-frame, costs less, and still meets code as long as the original frame anchoring passes inspection.
Storm Window Replacement
Storm windows on a barrier island have one job: keep wind-driven rain and debris out when a named storm passes through. On Treasure Island, a storm window that doesn’t carry a valid Florida Product Approval number is worthless when the inspector comes. We install units rated for the wind zone that applies to your exact address, whether you’re on the Gulf side near Sunset Beach or protected a bit more on the Boca Ciega Bay side behind Captain’s Cove.
Energy-Efficient Upgrade
The same impact-rated glass that protects your home from wind also cuts the air-conditioning load in a Florida summer. Low-E coatings and argon-filled double-pane units make a real difference on Treasure Island, where homes get hammered by direct sun reflecting off the water. You don’t have to choose between code compliance and energy savings. The right product does both.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Treasure Island
We’re an authorized installer for more than a dozen manufacturer lines, and for Treasure Island work we commonly quote CGI, CWS, and ES Windows side by side on paper so you can see exactly what each line costs and what its wind-load rating covers. CGI has a long track record on Pinellas County barrier islands. ES Windows builds some of the strongest marine-grade aluminum frames we install. When you call for a quote on Treasure Island, we bring the specs, the Florida Product Approval numbers, and the pricing for each line to your kitchen table, and we register the warranty layers before we leave the driveway.
Common Window Replacement Problems We See in Treasure Island Homes
- Pitted and corroded aluminum frames. Original non-marine-grade frames on 1950s and 1960s homes pit within a few years from the dual salt spray rolling off the Gulf and Boca Ciega Bay. The sashes jam, the seals fail, and the whole unit has to go.
- Original jalousie windows that can’t pass wind-mitigation inspection. Those louvered glass slats on mid-century CBS homes cannot be brought into wind-borne debris compliance with any retrofit. The only fix is full-frame replacement, and insurance carriers know it.
- Failed rough-opening flashing. On a barrier island, wind-driven rain finds every gap. When old flashing tape disintegrates, water gets into the wall cavity, rot starts, and the next hurricane season turns into a mold problem.
- Seal failure and fogged glass on 1980s and 1990s units. Marine air accelerates seal degradation on the bay side as much as the Gulf side. Fogged double-panes are the most common call we get from Treasure Island homeowners who’ve already upgraded once.
We replaced a full wall of original jalousie windows on a 1962 CBS home off Paradise Boulevard with impact-rated Simonton double-hungs carrying a Florida Product Approval number. The old aluminum frames were so pitted from dual salt exposure that the sashes wouldn’t seat, and the rough-opening flashing had disintegrated. Our crew installed fusion-welded frames with new flashing tape and argon-filled low-E glass to meet Pinellas County’s wind-mitigation re-inspection standards. That’s the work this island demands.
Pricing for Window Replacement in Treasure Island, FL
A full-frame impact-rated window replacement in Treasure Island typically runs $1,800 to $3,400 per opening for standard sizes with a mid-range brand like CWS or Simonton. Insert replacement with impact-rated glass on an existing square frame lands between $1,100 and $2,200 per unit. Storm window replacement, when the framing is already compliant, runs $700 to $1,500 per window. Energy-efficient upgrades with low-E and argon-filled glass add $150 to $400 per unit over standard clear glass. The biggest cost driver on Treasure Island is wind-load rating, not brand name. Higher-rated units for Gulf-front exposures cost more than bay-side units because the frame engineering is different. We give you written line-item quotes before any work starts, and we don’t add surprise line items to the bill after the fact. Call (954) 280-4413 to schedule your free estimate.
We Also Serve Cities Near Treasure Island
TruePane handles Window Replacement in Treasure Island and the surrounding Pinellas County communities. We also take calls from homeowners in Acacia Villas, Alafaya, Altamonte Springs, and Altoona who need the same impact-rated, code-compliant work done on their homes. If you’re a few miles inland, the wind-load math changes, but the standard doesn’t. Done right is done right.
Serving Treasure Island, FL - Our Local Coverage Area
We’re based in the Treasure Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Treasure Island
Every replacement window on Treasure Island must meet the wind-borne debris requirements in the Florida Building Code for the High Velocity Hurricane Zone, which means impact-rated glass or an approved shutter system, with a Florida Product Approval number on every unit. The exact design pressure rating depends on your elevation, roof height, and distance from the Gulf of Mexico, but nothing on this island gets installed without documented compliance. A compliant quote includes the product approval number, the design pressure rating, and the anchoring schedule. Call (954) 280-4413 and we’ll walk you through what your exact address requires.
No. Original jalousie or louvered windows cannot be retrofitted to meet wind-borne debris requirements, no matter what a handyman tells you. The slats can’t hold impact glass, the frames can’t be reinforced, and Pinellas County inspectors will not pass them. Your only path to compliance and insurance renewal is full-frame replacement with impact-rated units. It’s the single most common job we do on Treasure Island.
Documented impact-rated replacement windows are one of the strongest wind-mitigation credits you can show your windstorm carrier, and on Treasure Island, where Citizens Insurance re-inspections are flagging non-compliant openings, the difference can be the difference between renewal and non-renewal. You need the Florida Product Approval numbers, the installation date, and a final inspection sign-off. We provide all of that in writing with every job. Call (954) 280-4413 for a free estimate and we’ll explain exactly what documentation you’ll receive.
A Treasure Island permit for replacement windows requires proper rough-opening flashing, approved anchoring per the manufacturer’s published schedule, and a final inspection by a Pinellas County building official. Barrier island work gets extra scrutiny on flashing because wind-driven rain intrusion is the failure mode inspectors see most. A cheap quote that skips the flashing tape or uses the wrong anchor pattern will fail inspection and cost you more in the long run. Our quotes include permit pull, the flashing materials, and the inspection coordination.
Treasure Island has salt air coming at every structure from two directions at once, the Gulf of Mexico to the west and Boca Ciega Bay to the east, and non-marine-grade aluminum doesn’t survive that environment for long. Frames pit within a few years, which leads to sash jamming, seal failure, and eventually wind-driven water working its way past the frames. The fix is replacing with marine-grade or impact-rated aluminum from a manufacturer that builds for coastal exposure, not inland. That’s the baseline standard for every job we quote on this island.
If you’re looking at window replacement on Treasure Island, FL and want a straight answer on what code actually requires and what it costs, call TruePane Windows & Doors at (954) 280-4413. A live person answers, you’ll get a written line-item quote, and the work comes with the Done Right Promise and both warranty layers registered in writing. Done right, on paper, the first time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Treasure Island with glazier-standard window and door work since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.