Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Cooper City
Door installation in Cooper City costs anywhere from $900 for a basic hollow-core replacement to $11,000-$18,500 for an impact-rated sliding glass door with a full buck tear-out, and most jobs are completed in one or two visits. We install, replace, and service entry doors, French doors, sliding doors, and custom doors across Rock Creek, Embassy Lakes, Monterra, and every other Cooper City neighborhood. We answer the phone when you call, show up when we say, and stand behind the work in writing.
Call (954) 280-4413 for a free estimate on any door in Cooper City.
Why TruePane Windows & Doors Is Cooper City’s Preferred Door Installation Company
We have spent more than four decades working in South Florida door openings, and a good share of that work has been in Cooper City. The houses here have a pattern: original doors from the mid-1980s through mid-1990s, aluminum frames corroding at the threshold, weatherstripping that turned to powder years ago, and sliding door anchors that do not meet current Broward County HVHZ pull-out requirements. We know what Cooper City inspectors look for before we ever open the truck.
Dale Kessler founded this company in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That applies to doors as much as windows. Every Cooper City job gets a technician who measures the opening twice, quotes manufacturer lines side by side on paper, and registers both warranty layers in writing before the truck leaves your driveway. That is the Keystone Standard.
People in Cooper City call us because they want a square deal and a company that will still answer the phone in thirty years. We hire local, train apprentices into journeymen, and a live person answers every call, 24/7. Not a voicemail tree. Not a call center. A person.
Our Door Installation Services in Cooper City
Entry & Swing Doors
Cooper City’s original entry doors are mostly hollow-core or light-fiberglass units from the 1980s. They were built before Hurricane Andrew forced Florida’s 1994 code overhaul, so they lack impact-rated glazing and fail current HVHZ wind-load tests when an inspector evaluates them. We replace them with impact-rated doors from PGT, CGI, and Andersen, set in corrosion-resistant hardware that holds up to Everglades-edge humidity. A standard single entry door replacement in Cooper City runs $1,800-$4,200 depending on glass and finish.
Storm Doors
A storm door on a Cooper City home has to do two things at once: let the afternoon breeze through and stand up to a summer storm that rolls in off the Glades without much warning. We install storm doors with laminated glass and reinforced frames that meet Broward County wind-load requirements. Most Cooper City storm door installs run $700-$1,600. We also check the existing main door behind it, because in this humidity the threshold is usually the first thing to go.
Arched & Custom Doors
Some Cooper City homes, particularly in Monterra and the custom sections of Rock Creek, have arched entryways or non-standard rough openings that a stock door will not fit. We measure every opening twice and order custom doors to the actual dimensions of the opening, not the nearest stock size. Custom arched door work in Cooper City generally starts around $3,500 and depends on the manufacturer, glass package, and whether we need to reframe the opening to square it up.
Double & French Doors, Bifold & Folding Doors, Pivot Doors
French doors in Cooper City are common in family rooms and master suites that open to patios. The original units, if they are still in place, typically have corroded aluminum frames and failed seals. We install double and French doors with fusion-welded frames and low-E glass from Milgard, Jeld-Wen, and ES Windows. Bifold and pivot doors are less common in Cooper City’s stock housing but we have installed them in newer additions and remodeled homes. Pricing for these larger openings runs $4,000-$12,000 depending on width, glass package, and whether the rough opening needs a full buck replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cooper City
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. For Cooper City specifically, we stock replacement parts, weatherstripping, and hardware for the brands we service, which means less waiting when a threshold or hinge set fails. We quote manufacturer lines side by side on paper so you see exactly what you are paying for, with both warranty layers registered in writing before the truck leaves your driveway. We also work with ES Windows and ECO Window Systems for homeowners who want a specific glass package or frame profile.
Common Door Installation Problems We See in Cooper City Homes
- Corroded aluminum frames and threshold screws. Cooper City sits on the western edge of Broward County, directly adjacent to Everglades wetlands. The ambient humidity here is among the highest in the county, and it accelerates oxidation on aluminum door frames and the screws that hold thresholds in place. A door that binds in July often binds because the frame has swollen or rotted at the sill, not because the hinges are out of adjustment.
- Sliding door anchors that fail HVHZ pull-out tests. In Rock Creek and Embassy Lakes, original 1980s sliding glass doors were often installed with embedment depths of only one to two inches into concrete. Current Broward County HVHZ requirements demand deeper, stronger anchors. Inspectors flag these failures during replacement, and the only compliant fix is a full buck tear-out and reframe.
- Hollow-core entry doors that predate impact codes. The original entry doors on most Cooper City tract homes were built before the 1994 building code overhaul. When a homeowner goes to replace one, inspectors evaluate the whole opening against current wind-load standards. Many of these original doors fail, so replacing them is not a cosmetic choice. It is a code requirement.
- Fogged dual-pane retrofits installed years ago. Cooper City has a wave of retrofit double-pane windows and door glass from the early 2000s that are now fogged or failed. The seal breaks, moisture gets in, and the unit loses its insulating value. We replace failed door glass in Cooper City regularly, usually as part of a full door opening evaluation.
Pricing for Door Installation in Cooper City, FL
Door installation pricing in Cooper City starts around $900 for a basic solid-core entry door replacement and runs to $18,500 for a full impact-rated sliding glass door system with a buck tear-out. The chart below reflects what we see across Cooper City neighborhoods.
| Door Type | Typical Cooper City Range |
|---|---|
| Entry door, hollow-core replacement | $900 - $1,400 |
| Entry door, solid-core or fiberglass, impact-rated | $1,800 - $4,200 |
| Storm door | $700 - $1,600 |
| French or double door, impact-rated | $4,000 - $8,500 |
| Sliding glass door, impact-rated, standard opening | $3,500 - $7,000 |
| Sliding glass door, impact-rated, with buck tear-out and reframe | $8,000 - $18,500 |
What moves the price in Cooper City is the opening, not the door. A pre-1994 sliding door that fails a pull-out test needs a full buck tear-out, new pressure-treated framing, stainless steel anchors, and reframing around the rough opening. That adds $2,500-$5,000 to the job and it is not optional if the inspector has flagged it. We price that work upfront, in writing, so there are no surprise line items on the bill.
We offer free estimates on every door in Cooper City. Call (954) 280-4413 and we will send a uniformed technician to measure, assess the opening, and give you a written line-item quote before any work is scheduled.
We Also Serve Cities Near Cooper City
TruePane’s Cooper City crews also handle Door Installation work in neighboring communities including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you live on the edge of Cooper City or in a nearby neighborhood, call us and we will tell you which crew covers your street. Learn more about our work across the area on our Door Installation in Cooper City service area page.
Serving Cooper City, FL - Our Local Coverage Area
We’re based in the Cooper City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Cooper City
Because your original sliding door was likely installed before 1994, when Broward County’s HVHZ code took effect after Hurricane Andrew. Many 1980s sliding doors in Rock Creek and Embassy Lakes have concrete anchors embedded only one to two inches deep, which fails current pull-out load requirements. The fix is a full buck tear-out: remove the old frame, install new pressure-treated bucks, set stainless steel anchors to the required embedment depth, and install an impact-rated door. Call (954) 280-4413 if your inspector flagged the opening and you need a written scope of work.
Yes. Cooper City sits roughly 12 miles from the coast, but Broward County applies the full High Velocity Hurricane Zone standard to every city regardless of distance from the shoreline. The code does not have an “inland discount.” Every replacement door in Cooper City must meet Miami-Dade NOA wind-load ratings. We install compliant doors from manufacturers whose products are already approved, and we register both warranty layers in writing before the truck leaves your driveway.
Fiberglass with a composite core and stainless steel hardware is the most durable material for Cooper City’s high ambient humidity. Aluminum frames, especially older ones, corrode at the threshold and the jamb in this climate. Hollow-core wood doors swell and rot at the sill within a few years. We recommend fiberglass entry doors with corrosion-resistant hardware and sealed rough openings with flashing tape. For sliding doors, fusion-welded vinyl or fiberglass frames from Milgard and PGT hold up better than original aluminum under Everglades-edge humidity.
Look at the bottom rail and the threshold. If the door binds when you try to close it on a humid afternoon, the jamb or the core has likely swelled. If the threshold screws are corroded or the aluminum threshold itself is pitted, moisture has been wicking into the rough opening for years. If the door rattles in the frame when you push on the corner, the weatherstripping has failed and the door is no longer sealing against wind or water. Any of these conditions means the door has functionally failed and should be replaced, not patched.
Expect a possible buck tear-out, especially if the inspector has already evaluated the opening. In Rock Creek and Embassy Lakes, original sliding doors from the 1980s frequently have shallow concrete anchors that fail HVHZ pull-out tests. That means the entire frame comes out, new pressure-treated bucks go in, stainless steel anchors get set to current code depth, and the opening gets re-flashed before the new impact-rated door goes in. This is not a surprise if you work with a contractor who knows Cooper City. We price it upfront so the number on the estimate is the number on the bill.
Call TruePane for Door Installation in Cooper City
If your Cooper City door opening has a problem, we will tell you what it is and what it costs to fix, in writing, before you agree to anything. Call (954) 280-4413 to schedule your free estimate. A live person answers, every time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Cooper City and surrounding communities in South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.