Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Jupiter Island
Door installation in Jupiter Island, FL typically runs $1,800 to $6,400 for a standard entry door, $4,200 to $14,000 for impact-rated double French doors, and $9,000 to $28,000 for custom oversized or bifold systems. The single biggest cost driver on the island is wind-load compliance: Martin County requires Exposure Category D engineering, and that changes the hardware, the anchoring, and the permitting. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. Call (954) 280-4413 to schedule a free estimate.
Jupiter Island is not a typical Florida barrier island. It is one of the narrowest in the state, with the Atlantic on one side and the Indian River Lagoon on the other. That means your doors face salt spray from both directions, all year. We plan for that in the hardware spec, the sealant choice, and the anchoring method. Most door failures we see here are not from storms. They are from slow corrosion and undersized hinges that were never meant for marine exposure.
Why TruePane Windows & Doors Is Jupiter Island’s Preferred Door Installation Company
TruePane Windows & Doors was founded by second-generation glazier Dale Kessler in 2008, built on a rule that still sits on the whiteboard: if the pane is not true, the job is not done. We have carried that standard on every Jupiter Island project since, because homeowners here have specific expectations. They want a door that operates cleanly in July humidity, stays square through hurricane season, and does not need its hinges replaced in six years. That is our baseline, not an upgrade.
Our Door Installation crews work on Jupiter Island regularly, and we know what the Martin County building department expects before the first permit is pulled. That saves our customers re-inspection fees and re-engineering costs. Our technicians are background-checked and uniformed. They treat your home the way they would treat their own mother’s. We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and ES Windows, and we put those quotes side by side on paper so you can see exactly what you are paying for.
Every job carries the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave. A live person answers our phones 24 hours a day, seven days a week. No call center. No voicemail tree.
Our Door Installation Services in Jupiter Island
Impact-Rated Entry & Swing Doors
An entry door on Jupiter Island is not decorative. It is a structural component that has to hold its seal under hurricane-force wind, driving rain, and constant salt. We install impact-rated swing doors with marine-grade stainless hinges, compression weatherstripping, and anchoring that meets Martin County’s Exposure Category D requirements. Andersen and PGT are the two lines we most often recommend for shaded or direct-ocean exposures, depending on the elevation and how close the door sits to the dune line.
Double & French Doors
Double French doors are common on the island’s mid-century winter estates, especially on Beach Road and the quieter streets that run east of the Intracoastal. Many original units were not impact-rated, and the hardware was never stainless. By the time we arrive, the active leaf usually binds, the astragal is warped, and the hinges show visible pitting. We replace those with marine-grade hardware, impact glazing, and a proper continuous threshold that keeps lagoon-side moisture out of the subfloor.
Bifold & Folding Doors
On modern oceanfront homes, bifold and folding door systems often span 12 to 20 feet, sometimes more. Those openings need engineered headers, reinforced jambs, and floor tracks specified for marine environments. A mainland-standard aluminum track will corrode within five to seven years on Jupiter Island. We specify marine-grade alloys and stainless fasteners from the start, so the panels keep folding cleanly through years of salt exposure. ES Windows and ECO Window Systems both make folding systems we have installed successfully on island properties.
Pivot Doors
Pivot doors have become a signature on Jupiter Island’s newer estate builds, and for good reason: the hinge hardware carries the door’s full weight through a floor and header pivot, which works well for oversized, heavy slabs. But a pivot door that is not set dead-level or is underspecified for wind load will bind and leak within a season. We set pivots with a machinist’s level and verify the header blocking before the slab goes in. Custom sizing is the rule here, not the exception.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jupiter Island
We install and service doors from Andersen, ES Windows, along with a dozen other manufacturer lines. For Jupiter Island customers, that matters beyond the name on the label. It means we understand each manufacturer’s coastal installation requirements, we order the correct marine-grade hardware packages, and we handle the paperwork Martin County requires for impact-rated product approvals. When a warranty claim comes up, we already have both layers registered and the documentation on file. No digging through old papers. No phone-tag with a manufacturer.
Common Door Installation Problems We See in Jupiter Island Homes
- Corroded hinges and threshold fasteners within five to seven years. Ordinary stainless steel is not marine-grade stainless. With salt air circulating from both the Atlantic and the Indian River Lagoon, standard hardware pits, seizes, and eventually fails. We specify 316 stainless on every exterior door on the island.
- Fogging between panes in impact-rated doors. Barrier-island sun and storm-driven moisture create repeated thermal shock that stresses the seal. That fog is not cosmetic; it is argon loss and a dead insulating gas fill. We see it often on doors installed a decade ago with mainland-standard glazing packages.
- Failed Martin County inspections on reused NOA documentation. Contractors who work across the line in Palm Beach County often bring their Palm Beach approvals to Jupiter Island and expect them to pass. Martin County wants the documentation re-submitted with supplemental engineering. We handle that before the permit is filed, not after the inspector leaves.
- Non-standard rough openings from mid-century construction. Houses built in the 1950s through 1970s originally had jalousie or single-pane casements. Those rough openings rarely match today’s catalog door sizes. Custom or semi-custom sizing, plus careful jamb rebuilding, is the routine fix.
Pricing for Door Installation in Jupiter Island, FL
| Door Type | Typical Range (Jupiter Island) |
|---|---|
| Standard Entry Door | $1,800 - $6,400 |
| Impact-Rated Entry Door | $3,200 - $8,800 |
| Double French Door (Impact) | $4,200 - $14,000 |
| Bifold / Folding Door System | $9,000 - $28,000 |
| Custom Pivot Door | $7,500 - $22,000 |
What pushes a Jupiter Island door install toward the top of those ranges is the same thing that protects your home: marine-grade hardware, impact glazing, and the engineering documentation Martin County requires. A cheap bid usually trims those line items. The door looks the same on the surface for a year or two, then the hinges pit and the threshold fasteners let go. A compliant quote includes the anchoring details, the NOA re-submission labor, and the inspection coordination. We give you that as a written line-item quote, not a surprise on the final bill. Call (954) 280-4413 for a free estimate.
We Also Serve Cities Near Jupiter Island
Our crews serve Door Installation in Jupiter Island and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. Scheduling is coordinated from our South Florida office, and our technicians work these routes weekly. When you call, you talk to a person who knows the area and can give you an honest answer about timing.
Serving Jupiter Island, FL - Our Local Coverage Area
We’re based in the Jupiter Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Jupiter Island
Yes. Jupiter Island falls under Martin County’s building department, while the town of Jupiter is in Palm Beach County. Martin County runs its own plan review and will not automatically accept Palm Beach County-approved NOA documentation. Impact-rated door products may need re-submission with supplemental engineering and anchoring details before Martin County signs off. We handle that paperwork as part of the quote, so you are not stuck mid-permit with an unapproved product. Call (954) 280-4413 to schedule your free estimate.
An entry door on Jupiter Island must meet Exposure Category D wind-load requirements under Martin County’s coastal construction code. That means the door assembly, anchoring, and hardware must be engineered for direct oceanfront wind and missile impact. A standard mainland-rated door will not pass inspection, and it will not protect the opening during a storm. We quote impact-rated systems that carry the correct Florida Product Approval and NOAA-compliant testing for this exposure category.
Jupiter Island is only a few hundred yards wide in places, so salt-laden air from the Atlantic on the east and the Indian River Lagoon on the west circulates around every property year-round. There is no sheltered side. Ordinary stainless fasteners and aluminum extrusions that last 15 years on the mainland can show significant corrosion within five to seven years here. We specify AAMA 2605-compliant finishes and marine-grade 316 stainless hardware on every exterior door we install on the island.
Rarely. Mid-century winter estates built from the 1950s through the 1970s were originally fitted with jalousie or single-pane casement units, and those rough openings do not match today’s catalog door sizes. Modern oceanfront homes often have openings that exceed standard dimensions entirely. We measure twice, and when the opening is not standard, we quote semi-custom or fully custom systems sized to your home rather than forcing an ill-fitting door into a frame it was never designed for.
Documented compliance with Martin County’s wind-load and impact-rating requirements can directly affect how an insurer treats a windstorm claim and may qualify you for wind mitigation credits on your premium, depending on your carrier and policy. The key is having the product approvals, engineering, and inspection sign-offs on file. That is why we register both warranty layers in writing and keep the compliance documentation organized before we leave the job. Call (954) 280-4413 for an exact quote and a clear explanation of what your door project requires.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Dale is a second-generation glazier who has built TruePane around a single rule: if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.