Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Ocean Ridge
Door installation in Ocean Ridge comes down to one decision that matters more than any other: which materials will actually survive this barrier island. We’ve been replacing doors here long enough to know that standard anodized aluminum tracks seize from salt spray within two or three seasons on the Atlantic side. If you’re on Spanish River Drive, Old Ocean Boulevard, or anywhere between A1A and the Intracoastal, your doors face corrosive air from both directions, and that changes everything about what we recommend. We install doors throughout Ocean Ridge, from entryways to impact-rated sliders, and we do it with hardware spec’d for exactly this environment. Call (954) 280-4413 for a free estimate, and we’ll walk the job with you in person.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Door Installation Company
We’ve earned our standing in Ocean Ridge by doing the same thing for years: showing up when we say, measuring every opening twice, and installing doors that don’t bind, corrode, or leak. Homeowners here don’t want a sales pitch. They want a straight answer about whether their 1972 slider can be converted to impact-rated, and what that conversion will cost. We give that answer in writing, on paper, before we touch a screw. Dale Kessler founded TruePane in 2008 with a rule that still governs every install: if the pane is not true, the job is not done. That rule applies doubly in Ocean Ridge, where a door that’s out of true by an eighth of an inch will bind worse every summer as the heat and salt do their work.
Our technicians are background-checked and uniformed, and they know Ocean Ridge’s housing stock. The original CBS rough openings on a 1960s jalousie door are different from what a mainland crew expects, and if you don’t understand that, you’ll end up reframing an opening that didn’t need it, or worse, shimming a gap that then drinks salt air for a decade. We also carry stainless-steel and marine-grade hardware as stock items for Ocean Ridge jobs, not special order. That matters when a corroded hinge pin fails on a Tuesday and you don’t want a temporary fix. Our Door Installation team has handled hundreds of these replacements, and the Done Right Promise backs every single one.
Our Door Installation Services in Ocean Ridge
Impact-Rated Entry & Swing Doors
An entry door in Ocean Ridge does more than open and close. It’s the boundary between your home and a Wind-Borne Debris Region, which means Palm Beach County code requires impact-rated glazing or an approved shutter system on any replacement. We install entry and swing doors with PGT WinGuard or CGI SENTINEL frames and laminated impact glass, typically within the original CBS rough opening for homes built between the 1950s and 1970s. Stainless-steel hinges and latch hardware come standard on ocean-facing exposures. A standard residential door with plated steel hardware will start showing corrosion at the hinge pins within two years here. We don’t install that spec.

Storm Doors
Storm doors in Ocean Ridge face a double beating: salt air and coastal wind gusts. The typical mainland storm door with an anodized aluminum frame and standard insect screen will look tired within three seasons, and the closer arm will start to seize. We spec storm doors with fusion-welded frames, stainless or brass hardware, and corrosion-resistant closers rated for repeated salt exposure. For Ocean Ridge homeowners on the west side of the island, the Intracoastal side, a storm door is often the difference between catching the evening breeze and keeping rain out during summer squalls. For the east side, it’s an extra barrier against salt mist that comes off the Atlantic on winter fronts.

Double & French Doors
Double French doors on a patio or sunroom are common in Ocean Ridge renovations, and they fail in predictable ways. The hardware is the weak point: plated steel pivot pins, latch bolts, and flush bolts corrode and then snap. We install double and French doors with stainless or brass hardware, compression weather-stripping, and sills that drain properly instead of trapping salt-laden water against the frame. If your opening faces the ocean between A1A and Old Ocean Boulevard, we’ll recommend an aluminum-clad frame with marine finish on the exterior bead. It costs more up front. It costs far less than replacing the same door again in eight years.

Bifold & Folding Doors
Bifold and folding door systems are popular in Ocean Ridge because they open a family room to a pool deck or terrace. But a four-panel folding system on the east side of the island has four hinge points, four pivot tracks, and four seals all exposed to salt air simultaneously. We install bifold doors with stainless rollers, marine-grade tracks, and thermally broken aluminum frames that resist the oxidation cycle that kills standard systems here. The track design matters as much as the material: an exposed bottom track will collect sand and salt every time it rains, so we spec recessed tracks with positive drainage wherever the threshold allows.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
We’re an authorized installer for more than a dozen manufacturer lines, but for Ocean Ridge we lean on three that have proven themselves against double-salt exposure: PGT, CGI, and ES Windows. PGT WinGuard and CGI SENTINEL aluminum-clad frames with stainless hardware are the standard spec we recommend for any ocean-facing or Intracoastal-facing opening. ECO Window Systems and CWS offer solid mid-range options for the west side of the island where exposure is slightly less aggressive. We keep fast-turnaround parts on hand for these lines, so when a roller fails or a lock cylinder needs replacement, we’re not waiting on a truck from Orlando. We come to Ocean Ridge with the right hardware the first time.
Common Door Installation Problems We See in Ocean Ridge Homes
- Seized anodized aluminum tracks on sliding glass doors. On ocean-facing exposures, standard aluminum tracks oxidize and fuse within two to three seasons. The rollers freeze, the sash won’t move, and the only fix is a full track and roller replacement, ideally with fusion-welded frames and stainless components.
- Corroded hinge pins and latch mechanisms on entry doors. The double-salt environment on Ocean Ridge’s barrier island attacks plated steel hardware faster than anywhere else in Palm Beach County. Pins snap, latches bind, and homeowners get locked out or locked in.
- Non-impact single-pane doors failing wind-load code. Original 1960s and 1970s doors without impact glazing cannot meet current Florida Building Code requirements for the Wind-Borne Debris Region. Insurance carriers in Ocean Ridge increasingly flag these doors during inspection, and replacement becomes a requirement, not an upgrade.
- Unsealed joints between door frames and CBS block. Salt-laden moisture seeps into the rough opening, rots the wood subsill, and corrodes jamb anchors. We see this most often on original 1950s CBS homes where the original jalousie door was pulled and a conventional door was jammed in with shims and caulk.
Pricing for Door Installation in Ocean Ridge, FL
A standard impact-rated single entry door in Ocean Ridge typically runs $2,500 to $5,500 installed, depending on whether the rough opening needs reframing and which finish package you choose. A double French door with impact glazing runs $6,000 to $12,000, with stainless hardware adding $300 to $600 to the total. Bifold or folding systems start around $8,000 for a three-panel configuration and go up from there. The coastal-spec version of any door, meaning marine-grade frame finish and stainless or brass hardware, runs 15 to 25 percent more than the same door with inland-grade components. That gap buys you a door that won’t seize, snap, or stain within a decade. We give written line-item quotes on paper, side by side, so you can see exactly what that difference pays for before you sign. Call (954) 280-4413 to schedule a free estimate, and we’ll price both specs so the decision is yours, fully informed.
We Also Serve Cities Near Ocean Ridge
Our crews serve Ocean Ridge and the surrounding coastal and inland communities, including Briny Breezes, Gulf Stream, Delray Beach, Boynton Beach, Hypoluxo, and Lantana. If you’re just outside Ocean Ridge proper, or you’re on the mainland side of the Intracoastal, we can usually reach you within the same week and often sooner. Our service area connects directly to Ocean Ridge along A1A, Federal Highway, and the barrier island’s bridge crossings.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Ocean Ridge
Ocean Ridge sits on a barrier island with the Atlantic on one side and the Intracoastal on the other, so every door track gets hit with salt-laden air from both directions simultaneously. Inland Delray Beach sees far less airborne salt, and anodized aluminum tracks last five to ten years there. In Ocean Ridge, that same track seizes within two to three seasons on the ocean-facing side. The fix is fusion-welded aluminum frames with stainless rollers and marine-grade track finishes, which is what we spec on every Ocean Ridge sliding door replacement. Call (954) 280-4413 for a free on-site assessment of your existing tracks.
In most cases, yes. Original CBS rough openings on Ocean Ridge homes from the 1950s through 1970s were sized for jalousie doors, and we regularly convert those openings to impact-rated casements or impact sliders without reframing. The key is measuring the actual rough opening, not the jalousie frame, because the frame sits inside the opening. If the opening is square and the CBS block is sound, we install the new impact-rated door within the existing structural opening. On Spanish River Drive, we did exactly this for a 1960s jalousie door and adjacent slider, and the original rough openings held without modification.
Required. Ocean Ridge is within Palm Beach County’s Wind-Borne Debris Region, and the Florida Building Code mandates that any replacement door, window, or skylight in this region carry impact-rated glazing or an approved impact protection system. There’s no grandfathering for original single-pane doors once you replace them. If you’re replacing an old door in Ocean Ridge and the permit was pulled correctly, the new door must meet the current wind-load and missile-impact standards. We pull permits on every job and the inspection gets scheduled before we leave.
Stainless steel or solid brass, full stop. Plated steel hardware, even on a double French door that looks substantial, will show corrosion at the hinge pins and latch bolts within two years on an Atlantic-facing exposure. We use stainless or brass hardware as standard on ocean-facing doors in Ocean Ridge, and we carry both in stock so there’s no special-order delay. The same rule applies to the threshold and the weather-stripping: marine-grade seals and a properly drained sill are non-negotiable on the east side of the island.
Plan on 15 to 25 percent more for a coastal-spec door versus the same door with inland-grade components. On a $4,000 entry door, that’s $600 to $1,000 extra for marine-grade frame finish, stainless or brass hardware, and upgraded seals. The alternative is a door that binds, corrodes, or leaks within a few years, and then you’re paying for a second installation anyway. Over a decade, the cheap spec costs more. We quote both options on paper so you can see the difference, and we install the coastal spec by default on any Ocean Ridge opening that faces the ocean or the Intracoastal. Call (954) 280-4413 for a written line-item quote.
Contact TruePane Windows & Doors
If you have a door that binds, a slider that won’t slide, or a jalousie opening you want converted to impact-rated, call us at (954) 280-4413. We’ll send a technician to Ocean Ridge, measure the opening, and give you a written quote with both warranty layers stated in plain language. No pressure, no change orders, no surprises on the bill. The free estimate is yours for the asking, and the Done Right Promise backs every install we do.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge and the surrounding coastal communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After