Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Taft
Door installation in Taft usually starts with a simple question: can you swap the slab and be done, or is the whole frame shot? In this part of Orange County, we see the answer more often than not: the frame is shot. Taft’s concrete-block ranch homes from the 1950s through the 1970s were built fast, with door jambs set directly into block and almost no wood backing behind them. That means a door replacement here isn’t always a one-hour job. It’s a job that needs a crew who knows what hiding behind the trim before the first screw comes out. We’re that crew. Call (954) 280-4413 and we’ll walk the opening with you before we quote it.
Why TruePane Windows & Doors Is Taft’s Preferred Door Installation Company
We’re not the cheapest bid in Taft, and we won’t pretend to be. Homeowners here have lived in these houses for twenty, thirty, sometimes forty years. They remember the contractor who hung a door that bound every July and told them it would “settle.” We’re the call you make after that. TruePane was founded by second-generation glazier Dale Kessler on one rule: if the pane is not true, the job is not done. That rule applies to every door we set in Taft, from a front entry slab to a pair of French doors facing the afternoon sun off 2nd Avenue.
What does that mean for you? Background-checked, uniformed technicians who measure every opening twice. Quotes written side by side on paper so you see exactly what the manufacturer charges and what we charge to install it. Both warranty layers registered in writing before the truck leaves your driveway. We’re an authorized installer for more than a dozen lines, including, so we’re not pushing a single brand to clear inventory. We push the unit that fits your opening, your exposure, and your budget.
Dale Kessler has been at this since 2008. The company has been serving central Florida since 2008. Taft homeowners see the same faces year after year because we hire local and train apprentices into journeymen. We sponsor county fairs and church roof funds in Orange County because we plan to be here answering the phone in thirty years. And a live person answers that phone 24 hours a day, seven days a week. Not a machine. Not a callback form. A person.
Our Door Installation Services in Taft
Every door we install in Taft gets the same treatment: inspection first, permit pulled, opening prepped properly, unit set true, flashing done right, trim tight, and a walk-through before we call it done. Here’s what that looks like by door type.
Entry & Swing Doors
Most entry doors in Taft sit in CBS block walls with original wood jambs that have been soaking up Central Florida humidity for fifty years. We pull the old frame, inspect the rough opening for rot, sister in pressure-treated backing where the block was never furred out, and set a new pre-hung unit that closes square the first time. If your front door faces east or west, we’ll talk you through UV-stable finishes and weatherstrip rated for 90°F-plus thermal cycling.
Double & French Doors
Double doors are where Taft’s afternoon thunderstorms do the most damage. Rain drives at the seam, the astragal sags, and before long you’ve got daylight at the threshold. We set double and French doors with reinforced center posts, interlocking astragals, and sill pans flashed with peel-and-stick membrane. If your French doors face west, we’ll recommend low-E glazing and tell you straight whether the existing weatherstrip can be saved or the whole unit is past its service life.
Bifold & Folding Doors
Bifold and multi-panel folding doors are popular on Taft ranch homes that open onto patios, but the track systems fail fast in this humidity if they’re not shimmed and anchored to a level floor. We laser-check the track run before we mount a single panel. A folding door that binds halfway open isn’t a door; it’s an injury waiting to happen when a grandkid tries to horse it closed.
Pivot Doors
Pivot doors are heavy. A 42-inch pivot panel can weigh over 300 pounds, and in a block-construction Taft home, the pivot hinge needs a header strong enough to carry that load without sagging. Most 1960s headers were never sized for pivot hardware. We inspect, reinforce if needed, and set the pivot so the panel swings true at full radius. No rubbing, no drift, no stripped floor anchors.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Common Door Installation Problems We See in Taft Homes
Here’s what actually comes up when we open up doors in Taft. These aren’t hypotheticals. We see them monthly.
- Block-set jambs with no wood backing: Original installers nailed jamb legs directly into concrete block with cut nails and a prayer. The block expands and contracts through Taft’s 90°F-plus summer cycles, the jamb shifts, and the door starts binding at the top corner. A slab swap won’t fix it. The frame has to come out and get proper backing.
- Rotted thresholds and jamb bottoms: Years of afternoon thunderstorm rain gets driven against the door, finds its way past failed flashing tape, and wicks into the wood. By the time you see the rot at the bottom corner, the jamb is gone behind the casing too. We see this constantly on Taft’s original 1950s and 1960s doors.
- Jalousie windows beside the entry: Taft still has a notable share of jalousie louvered glass next to front doors. They leak air, they don’t meet wind-load standards, and they can’t pass an energy inspection. When you pull a permit to replace the door, the inspector sees the jalousie and the scope can legally expand to the window too. We explain this upfront, before the permit is pulled, so there are no surprises on inspection day.
- West-facing French door seal failure: The afternoon UV in central Florida is relentless. Weatherstrip on west-facing doors breaks down in three to five years, not the ten the manufacturer lists. Bugs get in, conditioned air gets out, and the homeowner thinks the door itself is warped. Sometimes it is. Sometimes it’s just the seal. We check both before quoting anything.
Pricing for Door Installation in Taft, FL
Door installation pricing in Taft depends on the condition of the opening, the unit you choose, and what the permit inspection obligates once the wall is open. A straightforward pre-hung steel entry door on an opening with sound framing typically runs $1,400 to $2,600 installed. A fiberglass entry unit with sidelites runs $2,800 to $4,500. Double French doors start around $3,200 and go up to $6,500 depending on impact glazing and hardware. If hidden rot or a block-set jamb forces a full frame rebuild, add $400 to $900 for backing, flashing, and trim. We write allowance language into every Taft quote so you know what a surprise costs before we touch it. Call (954) 280-4413 for a free, line-item estimate.
One thing that keeps Taft door prices honest: we register both manufacturer warranty layers in writing before the truck leaves, and the workmanship is covered by the Done Right Promise. If it’s not done right, we make it right. No paperwork fight, no arguing, no fine print that covers neither.
We Also Serve Cities Near Taft
We install and service doors in Taft, Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re nearby and want the same inspection-first approach, our Door Installation team covers the whole corridor. What applies in Door Installation in Taft applies in the neighboring communities too: block-set jambs, jalousie windows, afternoon thunderstorms, and inspectors who want wind-rated units in every opening.
Trusted Brands We Service in Taft
We’re an authorized installer for more than a dozen manufacturer lines, and for Taft homeowners we regularly quote. Why those three? Andersen for wood-clad and fiberglass entries that handle humidity without swelling. Jeld-Wen for steel entry doors with fusion-welded frames that hold square in a block wall. ViewLux for impact-rated units when you need Florida Product Approval without the coastal markup. We quote side by side on paper so you see the actual numbers, not a headline price with exclusions buried underneath.
Serving Taft, FL - Our Local Coverage Area
We’re based in the Taft area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Taft
Probably, yes. Orange County enforces the Florida Building Code, and once a permit is pulled and the inspector sees a jalousie window next to the new door, that jalousie is a non-compliant unit that fails both wind-load and energy requirements. The inspector can require it to be brought up to code before signing off. We flag this before we pull the permit, so you know the scope going in. Call (954) 280-4413 for a free opening-by-opening assessment.
It’s not hurricanes doing it. It’s the daily summer thunderstorms, the high humidity, and the original flashing tape that failed decades ago. Driven rain hits the door, finds its way past the old flashing, and wicks into the wood jamb. In Taft’s block homes, there’s often no drainage plane behind the jamb, so the water has nowhere to go. The fix is pulling the frame, replacing the rotted wood with pressure-treated stock, and flashing the sill pan properly. That’s a standard TruePane repair here. Call (954) 280-4413 to have us look at it.
Yes, you need them. Orange County’s jurisdiction aligns with the Florida Building Code, and inland homes fall under the same wind-load map’s inland wind zones. The rated wind speed in Taft is lower than Miami Beach, but it’s not zero, and the code still requires Florida Product Approved units for any permitted door replacement. We handle that on every Taft permit pull. Call (954) 280-4413 and we’ll explain what your specific opening needs.
Often, yes. Weatherstrip replacement on a west-facing French door is a common Taft repair, provided the door slab itself hasn’t warped and the frame is still square. We’ll inspect the threshold, the astragal, and the hinge alignment. If the seal is the only failure, you’re looking at a few hundred dollars instead of a few thousand. If the slab has warped beyond tolerance, we’ll tell you straight and quote a replacement. Call (954) 280-4413 for an honest look.
We inspect the opening before we quote. That means pulling the interior casing to check for rot and checking the jamb for wood backing. Then we write the quote with allowance line items for common Taft surprises: rotted jamb legs, block-set frames needing backing, and code-required upgrades to adjacent windows. We photograph everything we find. If a surprise shows up during the job, we price it in writing and get your approval before we proceed. No change orders on the final bill that you didn’t sign off on. Call (954) 280-4413 to schedule your free estimate.
TruePane Windows & Doors serves Taft with entry, French, bifold, and pivot door installation, repair, and replacement. A live person answers the phone 24/7. We pull permits, pass inspections, and register both warranty layers in writing before the truck leaves. Call (954) 280-4413 for your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Taft and central Florida communities with a second-generation glazier’s standard since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.