Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Washington Park
Door installation in Washington Park comes with a hard requirement most Florida communities don’t face: every replacement door, even a single entry unit, must carry a Miami-Dade Notice of Acceptance (NOA) or Florida Product Approval rated for the High Velocity Hurricane Zone. Washington Park sits entirely inside Broward County’s HVHZ, the strictest wind-resistance jurisdiction in the United States. A door that passes code in Palm Beach County won’t necessarily meet the bar here. TruePane Windows & Doors has installed HVHZ-compliant doors throughout Washington Park for years, and we handle the paperwork, the permit, and the inspection on every job. Call (954) 280-4413 for a free estimate.
Why TruePane Windows & Doors Is Washington Park’s Preferred Door Installation Company
We’re a second-generation glazier’s company, founded by Dale Kessler in 2008 on a rule that still hangs on our whiteboard: if the pane is not true, the job is not done. Washington Park homeowners call us because we know the difference between a door that looks installed and a door that will hold when a hurricane pushes against it. Our technicians are background-checked and uniformed. They measure every opening twice, and they register both manufacturer warranty layers in writing before the truck leaves your driveway.
We do not take shortcuts on HVHZ documentation. Inspectors in Broward County will reject an impact-door installation outright if the installer cannot produce the specific NOA number on the permit application. That single paperwork step trips up contractors licensed elsewhere in Florida who don’t work in the HVHZ every week. We do. Washington Park homeowners also get our Done Right Promise: if something isn’t right, we come back and fix it, no arguing, no fine print. And a live person answers our phone 24 hours a day, 7 days a week.
Our Door Installation Services in Washington Park
Most Washington Park homes are mid-century concrete block construction, which means door openings often drift out of square as the structure settles over decades. We correct the rough opening before we set the jamb. Every install is anchored per HVHZ fastener schedules, not builder’s habit. Here’s what we install most in Washington Park:
Entry & Swing Doors
Entry doors in Washington Park take the brunt of Atlantic wind-driven rain from June through November. We install impact-rated swing doors from manufacturers like Andersen and ES Windows, each carrying a current NOA number we put on the permit application for you. A properly anchored entry door on a 1950s concrete block home off NW 23rd Avenue isn’t just curb appeal. It’s the difference between a dry foyer and a blown-in panel during a named storm.
Storm Doors
A storm door in Washington Park is not a decoration. We install storm doors that meet HVHZ requirements when combined with a code-compliant primary door. The outer door adds an air buffer against the humidity that oxidizes aluminum frames, and it lets you ventilate the house in February without inviting in the wet season. We quote storm doors side by side on paper so you see exactly what each line costs.
Pivot Doors
Pivot doors are heavier and taller than standard swing doors, and Washington Park’s concrete block homes sometimes need header reinforcement to carry the load properly. We pull the permit, we size the header, and we use HVHZ-rated anchors. Dale Kessler’s rule applies here more than anywhere: a pivot door that sags a quarter inch in year two means someone measured once. We don’t.
Double & French Doors
French doors in Washington Park must meet missile-impact standards when glazed, and the active leaf has to be anchored to the passive leaf and the jamb per the manufacturer’s NOA. We install double and French doors with multi-point locking hardware, and we flash the sill the way the Broward County inspector will look for it. The permit gets the correct NOA number on the first submittal.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Washington Park
We’re an authorized installer for more than a dozen manufacturer lines, including, ES Windows, and ECO Window Systems. That matters in Washington Park because Broward’s HVHZ documentation rules mean we can’t just sell you whatever’s in the warehouse. We quote comparable brands side by side on paper, with the NOA number for each product, so you know exactly what you’re buying before we start. Dispatch and scheduling are coordinated from our South Florida office, and crews serve Washington Park locally.
Common Door Installation Problems We See in Washington Park Homes
- Missing or expired NOA documentation: A contractor licensed outside Broward installs an impact-rated door, then can’t produce the Miami-Dade NOA number when the inspector asks. The permit gets rejected, and the homeowner is stuck with a door that can’t be signed off. We document every NOA number before we submit the permit, the first time.
- Jamb anchored with the wrong fasteners: HVHZ code requires specific anchor spacing and fastener types into concrete block. We see doors with impact glass that were screwed in with drywall screws or old corroded hinges. The glass might be rated; the door isn’t. We pull the old fasteners and install per the manufacturer’s approved schedule.
- Out-of-square rough openings: Decades of settling in Washington Park’s concrete block homes leaves door openings twisted and racked. A rookie hangs the slab and calls it done. We correct the opening before the jamb goes in, so the door closes true on day one and still closes true next July.
- Corroded aluminum from salt air and humidity: South Florida’s year-round heat and humidity oxidizes aluminum frames and degrades glazing seals faster than drier climates. On Washington Park homes close to the Intracoastal, we see hinges and thresholds that look fine until you remove them and find the corrosion underneath. We replace the hardware, not just the slab.
Pricing for Door Installation in Washington Park, FL
What does door installation cost in Washington Park? A standard HVHZ-compliant entry door replacement typically runs $1,800 to $4,200, including the slab, jamb, hardware, permit, and HVHZ anchoring. Storm doors run $900 to $2,200. French doors, which require double the glazing and multi-point hardware, land between $4,500 and $9,500 for a permitted, compliant install. Pivot doors are project-priced, usually starting around $6,000 and rising with door weight, glass package, and header work. The biggest variable is whether the old jamb can be reused or needs full replacement. We always provide a written line-item quote before any work starts. Call (954) 280-4413 to schedule your free estimate.
We Also Serve Cities Near Washington Park
TruePane installs doors throughout the surrounding area, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re just over the line from Washington Park, the same HVHZ rules apply, and the same crew will show up. Our Door Installation team carries current NOA documentation for every product we install in Broward County. Learn more about our work across the region on our Washington Park page.
Serving Washington Park, FL - Our Local Coverage Area
We’re based in the Washington Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Washington Park
Yes. Washington Park sits inside Broward County’s High Velocity Hurricane Zone, and Broward County requires a permit for any door replacement, including a single entry door, when the work involves structural anchoring or impact-rated products. The permit application must list the specific Miami-Dade NOA number for the door being installed. We pull the permit, list the correct NOA, and schedule the inspection as part of every job. Call (954) 280-4413 if you want us to handle the paperwork from the start.
A Miami-Dade Notice of Acceptance is a product approval document proving a specific door model and its anchoring system have been tested to withstand the wind loads and missile impacts required in the HVHZ. Every door we install in Washington Park must carry a current NOA or Florida Product Approval rated for HVHZ. Without it, the Broward County inspector will reject the installation, and your insurance company may deny a future wind claim. We put the NOA number on the permit application before we start work.
Yes, provided the French door carries an HVHZ-rated NOA and the installer anchors both leaves, the astragal, and the jamb per the manufacturer’s approved schedule. Impact-rated French doors require multi-point hardware and proper sill flashing. We install French doors in Washington Park regularly and pass the Broward County inspection the first time because we document every NOA number and anchor spec. Call (954) 280-4413 for a written quote.
Plan on roughly two to four weeks from permit submittal to final inspection. The June through November hurricane season drives a surge of replacement demand every spring, which creates backlogs at the Broward County Building Division. We submit complete permit packages with the correct NOA numbers the first time, which avoids the rejection resubmittal cycle that adds weeks to the process. The on-site installation itself is typically a single day.
Many Florida insurers offer wind mitigation credits for doors and windows that carry current Miami-Dade or Florida Product Approval numbers and are installed with documented HVHZ anchoring. We provide the completed permit and inspection records you need to present to your insurer. Whether the premium drops depends on your policy and carrier, but the documentation is what most homeowners are missing. Call (954) 280-4413 and we’ll explain what paperwork your installation will generate.
If you need door installation in Washington Park done right, with the HVHZ documentation to prove it, call TruePane Windows & Doors at (954) 280-4413. We’ll come out, measure your openings, and give you a written line-item quote with the NOA numbers on it. A live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Washington Park and the surrounding Broward County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.