Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Westchester
Door installation in Westchester costs between $650 and $2,800 for a standard entry or swing door, while impact-rated French doors and custom pivot units run $2,400 to $6,500 depending on the opening and hardware. Most Westchester jobs are scheduled within the week, and unlike bigger outfits we actually answer the phone when you call. That matters here because nearly every ranch home in Westchester has door openings cut into solid concrete block, and a door that looks like a straight swap usually is not. Our crews know Bird Road and Coral Way traffic patterns, we know the block homes off SW 8th Street, and we know what a Miami-Dade inspector will flag before the permit is even pulled. Call (954) 280-4413 and you will speak to a person who can talk through your opening, your budget, and an honest timeline.
Why TruePane Windows & Doors Is Westchester’s Preferred Door Installation Company
We are not a lead-generation broker who hands your job to the lowest bidder. TruePane Windows & Doors is led by Dale Kessler, a second-generation glazier who founded the company in 2008 on a rule that still governs every install we touch: if the pane is not true, the job is not done. That standard applies to doors the same way it applies to glass. Our technicians are background-checked, uniformed, and trained to measure every opening twice before a quote is ever written. When a Westchester homeowner calls us about a French door that binds in July or a corroded sliding door that will not latch, we show up in a marked truck, we look at the rough opening, and we quote manufacturer lines side by side on paper so you see exactly what you are buying and what each warranty actually covers.
Every job carries the Done Right Promise, backed by The Keystone Standard: both manufacturer warranty layers registered in writing, with durations stated, before the truck leaves your driveway. No paperwork fights later. No arguing about what was promised. If it is not done right, we make it right. That is a different way to run a door company, and it is the reason the same families call us back twenty years after the first install.
A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree, not a callback form, not a regional call center. When a storm takes out a door panel in Westchester at midnight, you get a human being.
Our Door Installation Services in Westchester
Entry & Swing Doors
Entry doors on Westchester ranch homes carry more than curb appeal. They are the first line of defense against direct hurricane exposure, and the original doors on most 1955-1975 CBS homes were lightweight units never designed for HVHZ wind loads. A properly installed entry door in Westchester means anchoring into the concrete block with a buck frame where needed, flashing the sill, and setting a door that carries a Miami-Dade NOA. We install steel, fiberglass, and wood entry doors with threshold pans, composite jambs, and multi-point locks. You get a door that closes square and stays square, not one that rubs the jamb when the humidity peaks in August.
We know from experience that a standard Florida Building Code door will get bounced at permit review in Westchester. We do not even quote those for openings that require NOA products. Saves you the second trip and the rejected permit.
Double & French Doors
Double French doors transform a Westchester living room or patio, but only if the rough opening is dealt with correctly. Many original openings in Westchester were set with no buck at all, meaning the frame sits directly in the masonry and shifts as the block expands and contracts. We chisel out the opening, install a pressure-treated or composite buck, flash it with tape, and only then set the new door. On a 1960s CBS ranch off Bird Road, our crew pulled a corroded aluminum slider and found exactly that situation: no buck, frame wedged into the block, sill leaking for years. We rebuilt the opening properly and set an impact-rated Andersen French door with a composite jamb. The whole opening is now square, sealed, and HVHZ-compliant. That is the difference between a door that lasts five years and one that lasts thirty.
Bifold & Folding Doors
Bifold and folding doors are popular in Westchester for patio openings and interior pass-throughs, especially in homes where owners are opening up the back of the house to the yard. The challenge here is not just the door itself; it is the header. Older CBS homes often have undersized or under-supported headers over wide openings, and a folding door system puts a concentrated load at the pivot points. We check the header, add reinforcement when the opening calls for it, and size the track system for the actual weight of the panels. No sagging, no dragging, no panels that jump the track after one season of wet-and-dry cycling.
Pivot Doors
Pivot doors are a striking upgrade on a Westchester ranch, particularly on wider entry openings where an oversized slab makes the whole facade feel current. They are also the heaviest door you will ever install, and that weight is carried entirely by the top and bottom pivot hardware. On a concrete block home, that means anchoring into the block with proper fasteners and ensuring the floor substrate can carry the bottom pivot without deflection. We have seen pivot doors installed on slabs where the bottom pivot was seated on a cracked tile, and the door started to drift within months. We do it differently. The slab gets checked, the jamb gets reinforced, and the door gets hung so it swings on axis and stays there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Common Door Installation Problems We See in Westchester Homes
- Frames set directly into concrete block with no buck. The original door frame on many Westchester ranches was jammed into the masonry opening and caulked in place. Under HVHZ wind loads, that frame flexes, the door binds, and the sill leaks. A proper fix means chiseling out the opening and installing a buck before the new unit goes in. Skipping this step is the single most common reason a Westchester door fails within a few years.
- Florida Building Code doors quoted for Miami-Dade HVHZ openings. A door that is legal in Broward County may not be legal in Westchester. Miami-Dade County requires a Notice of Acceptance (NOA) on replacement doors and windows, and a standard FBC product will get rejected at permit review or flagged when you sell or refinance. Cheaper quotes often omit this because the NOA-rated unit costs more. The savings disappear when the permit dies.
- Reusing a corroded aluminum jamb on a post-Andrew replacement. The old jamb may look fine once the door slab is off, but thirty years of salt air and humidity in Westchester eats the extrusion from the inside. A new slab on a corroded jamb is a warranty claim waiting to happen. We replace the entire frame assembly rather than patching around the rot.
- Thresholds that trap water during wet season. Westchester gets intense afternoon downpours from May through October, and a door threshold that is not properly sloped, flashed, and sealed becomes an indoor puddle. On acreage lots with outbuildings or ADUs, grading and drainage around the threshold matter just as much as the door itself. We scope the drainage before we ever quote the door.
Trusted Brands We Service in Westchester
TruePane is an authorized installer for more than a dozen manufacturer lines, and we keep a working inventory of common parts for Westchester service calls. On the impact side, we install and service PGT, CGI, and CWS products, all of which carry Miami-Dade NOA approvals and hold up through direct storm exposure. On the architectural and non-impact side, we work with Ply Gem among others. Because we are an authorized installer, not just a buyer at the distributor counter, we can register both warranty layers in writing before we leave your driveway. That is The Keystone Standard, and it applies to every door we install in Westchester.
Pricing for Door Installation in Westchester, FL
Here are straight numbers for Westchester, not vague ranges and not a sales call in disguise. A standard entry or swing door with a steel slab and basic hardware runs $650 to $1,400 installed. An impact-rated entry door with an NOA carries a range of $1,500 to $2,800 depending on size and finish. Double French doors start around $2,400 for a basic aluminum unit and climb to $5,500 or more for an impact-rated wood or composite pair with multi-point hardware. Bifold systems run $1,800 to $4,200 for most Westchester patio openings. A custom pivot door starts around $3,500 and can exceed $6,500 with oversized slabs and reinforced hardware.
What moves the price in Westchester specifically: whether the existing opening has a proper buck, whether the door must carry an NOA, and whether the threshold needs drainage work before the door is set. We will not hand you a number over the phone before we see the opening. What we will hand you is a written, line-item quote with manufacturer pricing side by side, and that quote is free. Call (954) 280-4413 to schedule yours.
We Also Serve Cities Near Westchester
Our Door Installation team works throughout the communities around Westchester, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. Same crews, same Keystone Standard, same Done Right Promise on every opening we touch. Dispatch and scheduling are coordinated from our Miami office, but the technicians who show up at your door know the local block-and-jamb conditions in your neighborhood.
Serving Westchester, FL - Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Westchester
Westchester door replacements typically cost 15-25% more than comparable jobs in Doral because the housing stock is different. Doral skews toward newer, wood-framed construction where openings are already sized and framed for modern doors. Westchester is dominated by 1955-1975 concrete block ranch homes where original openings were set without buck frames, and that hidden condition adds chiseling, buck installation, and flashing work to nearly every job. On top of that, every replacement door in Westchester must carry a Miami-Dade NOA, which costs more than a standard Florida Building Code unit. Call (954) 280-4413 and we will quote your actual opening, not a generic square footage number.
Yes, it genuinely needs a Miami-Dade NOA. Westchester is inside Miami-Dade County’s High-Velocity Hurricane Zone, and the county will not issue a permit for a replacement door that lacks a Notice of Acceptance. A Florida Building Code product approval is not sufficient. When you sell the house or renew an insurance policy, the door will be checked against the NOA database, and a non-compliant door becomes your problem. We only quote NOA-rated products for Westchester openings because quoting anything else would be setting you up for a rejected permit and a dead deal.
You usually cannot tell from the outside, which is why we inspect the rough opening before quoting. The telltale signs of a buckless install are a door that binds against the jamb when humidity spikes, a sill that leaks during heavy rain, or visible cracking in the stucco around the door corners. If your home is a 1950s-1970s CBS ranch, the odds are high that the original frame was set directly into the block. We will remove the interior casing during the estimate if needed, confirm what is there, and then quote the fix honestly. The estimate is free.
It changes the scope in ways that most door contractors never mention. Outbuildings and detached ADUs on Westchester acreage lots are often built on unpermitted slabs or pads with no continuous footing, and the original door openings may be undersized or out of square. Grading matters too: a door threshold set at grade on a lot that drains poorly becomes a water entry point every wet season. We check the slab, the opening, and the drainage before quoting, and we pull county permits when the structure calls for them. That is the difference between a door that works and a threshold that puddles.
Yes, and that is one of the main reasons Westchester homeowners hire us. We do not force a stock door size into a masonry opening that was built sixty years ago. We measure the existing opening, account for the buck we may need to add, and order or build a door that fits the actual dimensions of your CBS home. That keeps the exterior lines of your ranch house intact, which matters for both curb appeal and resale. Call (954) 280-4413 and we will come out, measure, and write the quote in plain English.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westchester and the surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.