Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Sunrise
Window installation in Sunrise, FL is governed by one fact most cities in Broward County don’t face: every opening must carry impact-rated glazing with a Miami-Dade Notice of Acceptance and pass a permitted inspection. That’s not a preference. It’s code, because Sunrise sits entirely inside Florida’s High Velocity Hurricane Zone. TruePane has worked through that requirement on hundreds of Sunrise homes, and we know what it takes to get the job done right and passed the first time.
Our Window Installation team serves every neighborhood in Sunrise, from Welleby to Sawgrass Mills-adjacent communities. A live person answers when you call (954) 280-4413, and we’ll give you a straight answer on price, materials, and schedule before we ever set foot on your property.
- Impact-rated and HVHZ-compliant installs - every window we set in Sunrise meets Miami-Dade NOA standards.
- Free estimates in writing - line-item quotes on paper, no vague numbers over the phone.
- Done Right Promise - if it’s not done right, we make it right. No arguing, no paperwork fights.
Why TruePane Windows & Doors Is Sunrise’s Preferred Window Installation Company
We’re not the cheapest bid in Sunrise, and we won’t pretend to be. We’re the company homeowners call after they’ve been burned once. The one that shows up on time, measures every opening twice, and registers both manufacturer warranty layers in writing before the truck pulls away.
Dale Kessler founded TruePane in 2008 out of a simple rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That standard carries through every jalousie-to-impact conversion we’ve done in Sunrise, every casement window we’ve set in Welleby, and every double-hung we’ve fitted in homes around Nob Hill Road and West Oakland Park Boulevard.
We’ve been at this craft since 2008 across the region. Our technicians are background-checked, uniformed, and trained as apprentices into journeymen. When they work in your Sunrise home, they work the way they’d work in their own mother’s house. That’s not a slogan. It’s the standard we hire against.
Sunrise homeowners tend to live in their houses for decades. They remember the contractor who left them with a fogged seal and a slider that binds in July. We plan to be the company they call twenty years from now, still answering the phone, still standing behind the work.
Our Window Installation Services in Sunrise
Impact-Rated Casement Windows
Casement windows are a workhorse in Sunrise homes, especially in the CBS construction that dominates neighborhoods built from the 1960s through the 1980s. The crank-operated sash seals tightly against the frame, which matters when a hurricane band pushes driven rain sideways across an inland lot with no coastal buffer. We install impact-rated casement windows that close like a vault door and still open wide to catch the evening breeze off the Everglades side of town.
Impact-Rated Double-Hung Windows
Double-hung windows are common in Sunrise’s older low-rise condo communities and single-family homes near the Sawgrass Expressway corridor. The upper sash on original units is often painted shut or bound with oxidation. Our replacements tilt in for cleaning, carry the Miami-Dade NOA, and hold their weather seal through the kind of afternoon convective storms Sunrise gets from June through September.
Fixed & Picture Windows
A picture window on the west side of a Sunrise home takes direct afternoon sun plus wind load from storms rolling off the flatlands. We specify low-E, argon-filled impact glass for these openings, which cuts solar gain and keeps the AC from working overtime during August heat.
Awning Windows
Awning windows work well in Sunrise for two reasons: they hinge at the top and shed water naturally, and they can stay cracked open in a mild rain without soaking the interior sill. In bathrooms and kitchens where code requires tempered glass and ventilation matters, we recommend impact-rated awnings with NOA documentation.
Jalousie-to-Impact Conversions
Sunrise still has a substantial stock of original jalousie windows from the 1960s and 1970s. Florida Building Code prohibits jalousies in new installations for good reason: every louver pivot leaks, and the wind resistance is effectively zero. Whole-house jalousie-to-impact conversion is a routine job for us in Sunrise neighborhoods like Welleby and the communities south of Oakland Park Boulevard – work that contractors in newer cities like Weston or Coral Springs rarely see at this volume.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and Ply Gem, plus. When a Sunrise homeowner sits down with us, we quote manufacturer lines side by side on paper so they see exactly what they’re buying, what the warranty durations are, and what each line costs. No mystery pricing. No “trust me” estimates. Both warranty layers get registered in writing before the truck leaves your driveway.
Common Window Installation Problems We See in Sunrise Homes
- Aluminum frame oxidation at the jamb. Salt-laced driven rain eats through sash corners on pre-2000 aluminum frames, letting water behind the stucco and rotting the rough opening. We see this constantly in Sunrise’s 1970s CBS homes, and the fix is full frame replacement, not a patch job.
- Jalousie windows bowing inward during thunderstorms. Every louver pivot is a leak point, and the whole assembly flexes under wind load. Water sprays across interior sills, and the window offers virtually zero storm protection. Full conversion to impact-rated fixed or casement units is the only real fix.
- Peeling non-marine flashing tape on replacement windows. Some contractors reuse generic flashing tape on impact window replacements. In Sunrise’s humidity and driven rain, that tape peels within two years, water wicks into the CBS wall, and the stucco blows out. We use marine-grade flashing tape on every opening, every time.
- Failed seals on “newer” windows from low-bid installers. We get calls about fog between the panes on windows installed only five or six years prior. The common thread is a cheap inland-spec unit pushed through an HVHZ-required job without proper glazing or sealant. You can’t un-ring that bell, but you can replace it correctly the second time.
Pricing for Window Installation in Sunrise, FL
A typical impact-rated casement window installation in Sunrise runs $850-$1,400 per opening, depending on size and frame material. Double-hung impact units run $800-$1,300 per opening. Fixed and picture windows with impact glazing start around $700 and climb to $1,800 for large openings. Jalousie-to-impact conversions, which require full frame removal, stucco repair, and re-flashing, run $1,200-$2,000 per opening because the rough opening is usually rotten and needs rebuilding.
The coastal-spec price gap is real. An inland-spec window rated for basic Miami-Dade compliance without marine-grade components can undercut the coastal-spec version by 15-20 percent. Within a decade, the cheap spec costs more. The frames corrode faster in Sunrise’s salt air, the seals fail, and the warranty doesn’t cover the labor to replace them. A square deal means telling you the real cost up front, not hiding it behind a low-ball first bid.
Call (954) 280-4413 for a free estimate. We’ll walk the openings with you, measure twice, and put numbers on paper.
We Also Serve Cities Near Sunrise
TruePane serves homeowners across the western Broward County area, including Window Installation in Sunrise and nearby communities like Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re within driving distance of the Sunrise area and need impact-rated windows installed correctly, call us and we’ll give you a real answer.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Sunrise
Sunrise falls entirely within Florida’s High Velocity Hurricane Zone (HVHZ), which mandates that every window and door replacement carry a Miami-Dade Notice of Acceptance for impact resistance and pass a permitted inspection. Boca Raton and other Palm Beach County cities sit outside the HVHZ boundary, so the same requirement doesn’t apply there. Your cousin’s job was under a different code. Yours is strict, and it exists because Sunrise takes the full force of a hurricane’s wind load with no coastal buffer to slow it down. Call (954) 280-4413 and we’ll walk you through what the NOA means for your specific openings.
No, and we won’t do it. Jalousie windows are prohibited from new installation under the Florida Building Code, and replacing only the glass still leaves you with leaking louver pivots, zero wind resistance, and a unit that won’t pass a Sunrise permit inspection. You need full frame replacement. We convert jalousie openings to impact-rated casement, fixed, or double-hung units with marine-grade flashing and stucco repair. Call (954) 280-4413 for an exact quote on your conversion.
The coastal-spec version uses marine-grade hardware, stainless fasteners, and glazing compounds designed to hold up against Sunrise’s salt-laced driven rain and intense UV exposure. The inland-spec version cuts corners on those materials and undercuts the price by 15-20 percent. Within eight to ten years, the inland-spec frames corrode at the jamb, the seals fail, and you’re paying for replacement labor that the warranty doesn’t cover. Cheap spec costs more over a decade. Call (954) 280-4413 and we’ll show you both options on paper, no pressure.
Broward County has some of the highest homeowner insurance rates in the state, and insurance carriers grant documented “opening protection” premium discounts for impact-rated windows and doors. In Sunrise, where every home is inside the HVHZ, that discount is often substantial enough to recover the cost difference between impact and non-impact windows within several years. We provide full documentation of the NOA and permit inspection so your insurer has everything they need to apply the discount. Call (954) 280-4413 to discuss what your savings could look like.
Fog between panes means the seal has failed and the insulating gas has escaped. That’s a manufacturing or installation defect, not normal wear. If your windows were installed by a low-bid contractor using inland-spec units, the warranty likely doesn’t cover the labor to replace them. If TruePane installed them, we already registered both manufacturer warranty layers in writing, and the fix is covered under our Done Right Promise. Call (954) 280-4413 and we’ll inspect the windows and tell you exactly where you stand.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Dale has led the company since 2008, building on years of glazing craft in South Florida. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.