Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Lake Park, FL | TruePane Windows & Doors
We provide independent CGI specialists for window and door service across Lake Park, from hardware repair on Estate casements to full-frame impact retrofits on original CBS homes. The one thing that sets our CGI work apart here is that we treat every job as a coastal installation, because Lake Park sits directly on the Lake Worth Lagoon and every permitted opening must meet High-Velocity Hurricane Zone standards. CGI builds a serious product, and we stock the OEM stainless fasteners, corner keys, and compression weatherstripping that hold up in this salt-air corridor. Call (954) 280-4413 for a straight answer on your CGI windows or doors.
Why Lake Park Residents Choose Us for CGI Service
We’re an independent CGI service provider, not a manufacturer affiliate or authorized dealer. That matters in Lake Park, where so many of the original steel and thin-aluminum frames have been eaten by brackish mist for sixty-plus years. Our techs see CGI lines daily in this HVHZ corridor, and they carry product-specific shims, sealants, and stainless hardware on the truck because the coastal corrosion profile here shortens the life of generic fasteners considerably. Dale Kessler founded TruePane in 2008 after spending the better part of two decades working glass and framing in South Florida’s coastal corridor. He grew up in Sailboat Bend, where his father spent weekends resealing jalousie windows and cursing the humidity. That’s more or less how he ended up in the trade, and it’s why our crews measure every opening twice before a truck ever leaves the driveway. We stock OEM stainless fasteners, corner keys, rollers, and compression weatherstripping for CGI, because aftermarket kits rarely match the frame extrusion or NOA-approved sash geometry required in this wind zone.
Common CGI Windows & Doors Problems We Solve in Lake Park
These are the five failure patterns we see most often on CGI units in Lake Park, and each one ties directly to the local conditions here:
- Salt-spray pitting on Estate Series frames. Along streets within two blocks of the Intracoastal, brackish mist accelerates oxidation on frame corners and weep slots. The aluminum develops pinhole pitting that eventually compromises the weep drainage and invites water intrusion. We inspect weep slots and replace corner keys before the frame loses structural integrity.
- Fogged or delaminated insulated glass in retrofits. Lake Park’s chronic high humidity and moisture intrusion through degraded original rough openings cause seal failure in double-pane units. This shows up most often in single-pane-to-impact retrofits where the original opening wasn’t properly sealed before the new CGI sash went in. We rebuild the rough opening before setting new glass.
- Binding or seized rollers on Sentinel impact sliders. Marine grit from lagoon-front exposure works into the tracks and grinds the rollers down. The stainless clips that hold the rolling mechanism corrode at the same time, and the door eventually binds or refuses to move. We replace rollers and clips with OEM stainless parts, not aftermarket substitutes.
- Finish failure on non-marine-grade frames. We see chalkiness and breakdown on Silver and Bronze finish units installed before current coating standards took effect. Direct lagoon-front UV plus salt air eats the finish faster than anything inland. We can restore or advise on replacement depending on how far the substrate has gone.
- Rough-opening deflection in older CBS walls. Lake Park’s 1940s and 1950s homes have CBS block walls that shift over time. Windows that were square at installation are now bowed by as much as 5/8 inch. A standard insert won’t sit correctly. We shim with composite horseshoe spacers and use a full flange-and-sealant method so the impact rating holds.
CGI Service in Lake Park: What Local Conditions Mean for Your Equipment
Here’s the single fact that changes everything about CGI service in Lake Park: this town’s original Kelsey City grid still contains a high share of original 1950s jalousie windows, and Palm Beach County insurers increasingly refuse to renew policies that include them. That insurance-driven removal demand, not storm damage, is the leading reason homeowners call us in Lake Park. A jalousie removal is not a simple insert job. The CBS walls in these small-lot homes follow no modern rough-opening standard, so each opening requires a permit and custom CGI frame adaptation. On Lake Shore Drive, our crew removed three original jalousie units from a 1951 CBS home and installed custom-sized CGI Estate impact casements as part of a Lake Park Window Installation without touching the terrazzo sills. The original steel frames had corroded so badly from lagoon-side salt air that the rough openings were out of square by up to 5/8 inch. We shimmed with composite horseshoe spacers and used a full flange-and-sealant method to hold the 180 mph wind-load rating. The homeowner’s insurer had threatened non-renewal if the jalousies weren’t gone, and we completed the permit-ready retrofit in two days.
CGI Models & Products We Service in Lake Park
We service the full CGI lineup that shows up in Lake Park homes: the Estate Series casements and fixed windows, the Classic Series, the Sentinel impact sliding glass doors, and Targa Series units. Our approach on parts is straightforward: OEM stainless fasteners, corner keys, and rollers always, because aftermarket kits rarely match the frame extrusion or the NOA-approved sash geometry required in an HVHZ zone. Repair makes sense for isolated hardware or glass damage on non-impact units. Impact-approved replacements are one-time assemblies and get swapped entirely when breached. We keep common CGI hardware on the truck for fast turnaround in Lake Park, so we’re not waiting on a regional distribution center when your slider binds or your casement won’t seal.
CGI Service Pricing in Lake Park
CGI window and door service in Lake Park is priced by the job, not by the hour, and the range depends on what’s actually wrong. Hardware replacement like rollers, corner keys, and weatherstripping typically runs $120 to $380 per opening. Glass replacement on non-impact units can range from $250 to $650 depending on size and coating. Full impact-window replacement with custom frame adaptation for older CBS openings runs $1,800 to $3,200 per unit installed. A free estimate includes a measurement of every opening, a check of the rough framing, and a written line-item quote so you see exactly what you’re paying for before work begins. Pricing moves based on the condition of the original opening, the CGI model you’re matching, and whether the rough opening needs reframing. Call (954) 280-4413 for an exact quote on your CGI windows or doors, estimates are free and we’ll talk through what the estimator sees on site.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Lake Park
No, and we’ll tell you that flat before you spend a dollar. Original steel and thin-aluminum frames from the 1940s through 1960s do not meet Palm Beach County’s HVHZ wind-borne debris requirements, and no inspector will sign off on impact glass in a frame that wasn’t designed for it. The frame has to be replaced along with the glass. We handle that as a full-frame job, which means new CGI units sized and shimmed to the existing CBS opening. Call (954) 280-4413 if you want an estimator to confirm what your current frames can and cannot carry.
Salt air corrodes aluminum through a slow electrochemical process, and it attacks the places where water pools first: frame corners, weep slots, and stainless clips. In Lake Park, the brackish mist off the Lake Worth Lagoon accelerates this dramatically compared to homes even two miles inland. You can slow it by rinsing frames with fresh water periodically and keeping weep slots clear, but you can’t stop it entirely. The practical prevention is using marine-grade finishes and OEM stainless hardware from the start, which is what we install on every CGI unit we touch here.
It depends on the installer’s understanding of HVHZ requirements, and that’s where we see problems. A product that meets Miami-Dade or Florida Building Code impact standards still has to be installed according to the manufacturer’s NOA-approved instructions for this wind zone. If the original rough opening is out of square, as many Lake Park CBS openings are, a standard install will not pass inspection. We measure every opening twice and modify the frame or shim as needed so the unit holds its wind-load rating. Call (954) 280-4413 if you’re unsure whether a previous install is actually compliant.
Yes. HOA or condo board approval covers the building’s aesthetic rules. It does not replace the Palm Beach County building permit required for any window or door replacement in an HVHZ zone. The permit is what triggers the inspection that verifies your impact product is on the NOA list and installed correctly. We pull the permit and handle the inspection on every CGI replacement we do in Lake Park, so you’re not left holding an expired permit or a failed inspection.
Sticking alone does not require replacement. What matters is whether the door is still impact-rated and structurally sound. If the rollers are worn and the clips are corroded but the frame and glass are intact, we replace the rollers and hardware with OEM stainless parts during your Lake Park Door Installation and the door works again. If the glass is breached or the frame is pitted through, replacement is necessary because impact-rated units cannot be field-repaired once the assembly is compromised. An estimator will tell you which path applies to your door. Call (954) 280-4413 to schedule that look.
Service Areas Near Lake Park
We service Lake Park service area and the surrounding coastal towns. Our crews also cover CGI service in Lake Worth Beach, where similar jalousie-to-impact conversions are common, and CGI service in Lantana, just south along the Intracoastal. If your home sits anywhere in this stretch of the lagoon, we’ll send someone who knows the corrosion profile and the code requirements cold.
Book Your CGI Service in Lake Park Today
If your CGI windows or doors need service in Lake Park, the next step is a free estimate. We’ll measure, check the rough openings, and put a written quote in your hand. Call (954) 280-4413 and a live person answers, day or night.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Park since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.