Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Coconut Creek
Door installation in Coconut Creek is not a one-size-fits-all job. Between Broward County’s High Velocity Hurricane Zone (HVHZ) code requirements and the architectural review boards inside communities like Wynmoor Village, a door replacement here follows a stricter path than almost anywhere else in South Florida. We know that path well, and we walk homeowners through it from the first measurement to the final inspection. If you need a new entry door, storm door, or impact-rated retrofit in Coconut Creek, call (954) 280-4413 for a free estimate and a straight answer on what your building requires.
Why TruePane Windows & Doors Is Coconut Creek’s Preferred Door Installation Company
We are a second-generation glazier’s shop, not a franchise playbook. Dale Kessler started TruePane with a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That rule governs every door we set in Coconut Creek, whether it’s a single entry slab in a Margate-adjacent condo or a full impact-rated swing door on a Coral Springs line street. Our technicians are background-checked and uniformed, and they measure every opening twice before any quote is written.
Coconut Creek homeowners call us because we understand the two-track approval process that governs this city. Broward County demands HVHZ product approvals before a permit is issued. Condo associations like Wynmoor Village add their own architectural review on top of that, which routinely adds two to four weeks to a timeline that a single-family home in the same zip code would not face. We plan for that from day one, so you are not stuck with a door leaning against the wall waiting on paperwork.
We serve Coconut Creek directly. Dispatch and scheduling are coordinated from our Miami (South FL) office, and our crews work locally throughout Coconut Creek, from the 33066 corridor down to the 33073 side. A live person answers our phone 24 hours a day, 7 days a week. That is not a call center and not a voicemail tree. It is someone who can tell you whether we have a crew in your part of Coconut Creek this week.
Our Door Installation Services in Coconut Creek
Entry & Swing Doors
Entry door replacement is the most common job we do in Coconut Creek, and for good reason. The original doors in most 1970s and 1980s condo buildings were built to a standard that predates post-Hurricane Andrew codes. Humidity from the Everglades air mass to the west accelerates oxidation on aluminum frames and hardware, and we regularly see doors that bind in summer and let drafts through in winter. A properly flashed, impact-rated entry door solves both problems at once, and we install it to hold its line in high wind and high humidity. Our Door Installation team handles everything from slab swaps to full frame-out replacements.
Storm Doors
For single-family homes in Coconut Creek, a storm door is a practical second layer: it protects the main entry door from UV load and driving rain, adds ventilation during the months when the air is thick, and gives you a screen option that keeps bugs out when the main door is open. We install storm doors that are sized to the existing jamb, and we check the threshold and sill pan before we set anything, because a storm door over a rotted sill is a waste of your money.
Bifold & Folding Doors
Bifold and folding door systems are increasingly popular in Coconut Creek’s 55+ communities where homeowners are opening up patio access or converting a dining room into a sunroom. These doors carry a heavier glass load than a standard swing door, so HVHZ product approval matters even more. We quote bifold systems from manufacturers whose products already carry Miami-Dade Notices of Acceptance, which satisfies Broward County’s stricter design pressure requirements without extra engineering letters.
Pivot Doors
A pivot door is a statement, and we have installed enough of them in Coconut Creek to know what the local humidity does to a large, heavy slab. Pivot hardware that works fine in a dry climate will bind within a few years here if it is not rated for the load and the environment. We quote pivot doors with hardware that is sized for the actual panel weight plus margin, not the bare minimum, and we level the pivot point so the door swings true on day one and on day one thousand.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coconut Creek
We are an authorized installer for more than a dozen manufacturer lines, and for Coconut Creek door work we commonly quote CGI, ES Windows, and ECO Window Systems. Each of those lines carries HVHZ product approvals that Broward County inspectors accept without a fight, which keeps your permit moving. When you call us for a door installation in Coconut Creek, we sit down and quote manufacturer lines side by side on paper, so you see exactly what you are buying, which warranty layers are registered, and what the lead time actually is. No verbal promises, no blank line for a change order later.
Common Door Installation Problems We See in Coconut Creek Homes
- Doors that pass Miami-Dade approval but fail Coconut Creek’s amended HVHZ standards. Contractors who mostly work outside Broward County do not always know that Coconut Creek’s design pressures exceed baseline Miami-Dade requirements. If the door’s approval does not match the specific pressure rating the plan reviewer asks for, the job gets red-tagged and you pay for re-inspection plus removal.
- HOA stop-work orders after a contractor skips the architectural review board. In communities like Wynmoor Village, starting work before the board signs off means a stop-work order, fines, and an aging resident left without safe egress for weeks. We file the application with the board before we schedule the install.
- Moisture-driven jamb rot from the Everglades-adjacent humidity. Installers who skip flashing tape and sill pan details on entry doors see wood frames swelling and binding within a few years, especially on single-level 1970s units. We flash every penetration and check the sill before the door goes in.
- Single-pane aluminum doors that have reached end of life. Most of Coconut Creek’s original doors predate Florida’s post-Hurricane Andrew codes. The aluminum oxidizes, the seals fail, and the door loses its line. Full impact-rated replacement, not repair, is the right call on the majority of these units.
Pricing for Door Installation in Coconut Creek, FL
A standard entry door replacement with impact-rated glazing on a single-family home in Coconut Creek typically runs $2,400 to $4,800, depending on the manufacturer line and whether the frame needs rebuilding. A storm door install is usually $700 to $1,400. Pivot doors start around $3,800 and climb with hardware and panel weight. Full frame-out work on a rotted jamb adds $600 to $1,200. Condo work inside Wynmoor Village or a comparable HOA campus runs higher, usually 10 to 20 percent above single-family pricing, because the dual-approval paperwork and the association’s insurance requirements add real hours before and after the install. We give you a written line-item quote before we start, and the price on that quote is the price on the bill. Call (954) 280-4413 for a free estimate.
We Also Serve Cities Near Coconut Creek
Beyond Coconut Creek, our crews cover Margate, Pompano Beach, Coral Springs, and Deerfield Beach. If you are on the line between two cities, call us and we will tell you plainly whether we serve your street. We do not pad a service area to look bigger; we work where we can get a crew to your door on time.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Coconut Creek
Yes, in almost every Coconut Creek condo association, a slab-only replacement still requires a permit and architectural review board sign-off. Broward County treats any door replacement as part of the building envelope, and the HVHZ product approval must be on file before the inspector will sign off. Your HOA may also require that the new slab match the existing color and style, which is another reason to get board approval before you buy. Call (954) 280-4413 and we will tell you exactly what your specific association requires.
Plan on two to four weeks longer. The architectural review board in Wynmoor Village meets on its own schedule, and the board’s approval must be in hand before the city will issue the permit. A single-family job in Coconut Creek can often go from measurement to install in a week or two. A Wynmoor job typically runs four to six weeks total, most of that waiting on paperwork. We file the board application the same day we finalize your quote, so the clock starts early.
No. Coconut Creek falls entirely within Broward County’s High Velocity Hurricane Zone. Every new door, regardless of evacuation zone, must meet HVHZ product approval standards with a Miami-Dade Notice of Acceptance or an equivalent Florida Product Approval. The evacuation zone has nothing to do with it; the wind zone governs the entire city. We only quote doors that carry the approvals Broward County actually accepts, so you never pay for a door that gets rejected at inspection.
Fiberglass is the best choice for a seasonal Coconut Creek home. It does not warp in the Everglades humidity, it does not oxidize like aluminum, and it holds paint or factory finish far longer than wood. We regularly quote fiberglass entry doors from Marvin and CGI for snowbirds who are gone from May through October, because the door sits sealed in a hot, humid house for half the year and still has to be square and true when they walk back in. We include stainless hinges and a sealed threshold as standard on these installs.
Yes, and we have watched it happen. A 1980s single-pane aluminum door leaks conditioned air around the perimeter and through the panel itself. We replaced a corroded aluminum sliding door in a Wynmoor Village condo with a Marvin impact-rated fiberglass entry door, including a new jamb, flashing tape, and a low-E insulated glass unit. The original door’s seal failure had let in Everglades humidity for years, warping the frame and making the door stick. After installation, the owner’s utility bill dropped noticeably and the door operates smoothly in high winds. The exact savings depend on how leaky the old door was, but a sealed, insulated, impact-rated door always outperforms a pre-Andrew original.
Need a straight answer on your Coconut Creek door project? Call (954) 280-4413 for a free estimate. We will tell you what your building requires, what it costs, and when we can start.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coconut Creek and South Florida with door installation since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.