Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Coral Springs
Door installation in Coral Springs carries a set of rules most Florida cities don’t deal with. Every replacement door on a Coral Springs home must meet Broward County’s High Velocity Hurricane Zone code, the same impact standard applied in Miami-Dade. TruePane Windows & Doors handles that requirement on every job we run here, from a single entry door on a 1970s CBS ranch to custom arched doors on newer builds. If you need a door replaced, hung, or reframed, call (954) 280-4413 and we’ll walk the job with you before any work is quoted.
Why TruePane Windows & Doors Is Coral Springs’s Preferred Door Installation Company
Coral Springs is a master-planned city, and the homes tell that story in their bones. Thousands of concrete block stucco houses went up between the mid-1960s and the 1990s, and many still carry their original aluminum door frames. Those frames corrode from the inside out in South Florida humidity, and when we open one up, we know what we’re going to find before the first screw comes out. That’s the difference between a crew that has worked Coral Springs neighborhoods for years and one that drives in from outside the county.
Our technicians measure twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. That’s The Keystone Standard, and it’s not a marketing phrase. It’s how Dale Kessler has run TruePane since 2008, and how we still run every installation today. Coral Springs homeowners call us because they want someone who will answer the phone if something isn’t right, and because the Done Right Promise means we come back and fix it without paperwork or argument.
We back that up in writing on every bid. Live person answers the phone 24/7. No voicemail tree, no callback form. Just a person who knows doors and knows Coral Springs.
Our Door Installation Services in Coral Springs
Most Coral Springs homes fall into a consistent pattern: concrete block construction, original aluminum frames, and HOA architectural standards that go back to the city’s founding design guidelines. Our Door Installation team works within those constraints every day. Here’s what we install most often.
Entry & Swing Doors
Entry doors in Coral Springs take a beating from the western storm exposure. Rain drives hard off the Everglades water conservation areas in the summer, and a door that isn’t flashed and sealed to HVHZ standard will soak its own jamb. We set every entry door with impact-rated hardware, full sill-to-header flashing, and a frame that won’t rack when the wet season swells old CBS walls. Most entry door installations in Coral Springs run $2,400-$5,800 depending on the slab and hardware.
Storm Doors
Storm doors make sense on older Coral Springs homes for one reason: the original front doors are often thin, air-leaking, and not worth replacing yet. A properly hung storm door cuts air infiltration and gives you a second layer against the summer rain, without pulling the existing jamb apart. We install storm doors with aluminum frames that hold up to Coral Springs humidity better than vinyl. Typical storm door work runs $650-$1,600 installed.
Arched & Custom Doors
Coral Springs has a distinct architectural character set in the 1960s and 70s, and some HOA communities still require arched openings or specific grid patterns as a condition of approval. We order custom-fabricated doors, including arched profiles, to match what your HOA’s architectural review committee will accept before we ever schedule the permit. Custom arched doors in Coral Springs typically run $4,200-$9,500, and we submit both the permit application and the HOA package at the same time so neither one stalls the job.
Bifold & Folding Doors
Bifold doors open a wall to the patio, and in Coral Springs they have to be impact-rated. We install thermally broken aluminum bifold systems from manufacturers like ES Windows and Andersen that pass HVHZ code without resorting to bulky shutters. The framing work is the variable: on a 1970s CBS wall, the opening often needs reframing and a new header before the door goes in. Plan for $7,000-$16,000 on most Coral Springs bifold installations, including the structural work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
We’re an authorized installer for more than a dozen manufacturer lines, and we carry HVHZ-certified product from ES Windows, ECO Window Systems on most Coral Springs jobs. That matters because a door that isn’t certified won’t pass Broward County inspection, period. We stock local parts and common slab sizes for Coral Springs customers, which means less waiting on a custom order when a door needs to be replaced in a hurry. We quote your options side by side, on paper, so you see exactly what each manufacturer line costs before you choose.
Common Door Installation Problems We See in Coral Springs Homes
- Rusted steel jambs on 1970s CBS walls. The original door frames were set directly into concrete block with no separation barrier, and fifty years of humidity corrodes them from inside. The door looks fine until you pull the trim, and then the jamb crumbles. We replace the entire rough opening, not just the slab.
- Undersized openings that don’t meet today’s HVHZ code. A door that passed inspection in 1972 won’t pass now. We reframe openings to current code, install the proper header, and close the permit with a final inspection that clears both the city and the HOA.
- Racking and binding doors in the wet season. When an installer hangs a new slab on an old, swelling frame, the door binds by July. We check jamb condition before we order anything, and we replace the frame when it’s compromised. We don’t hang a $5,000 door on a $50 frame.
- HOA rejection after the fact. Coral Springs has dozens of HOA communities, each with legacy profile, color, and grid restrictions. An installer who doesn’t front-load the architectural review gets the homeowner stuck with rework costs. We submit HOA packages before permitting so the door you order is the door that gets approved.
Pricing for Door Installation in Coral Springs, FL
Here’s what we see in Coral Springs, straight from our bid sheets. A standard entry door with HVHZ-certified slab and hardware: $2,400-$5,800. A storm door: $650-$1,600. Double French doors with reframing: $3,800-$9,200. Arched or custom doors: $4,200-$9,500. Bifold systems: $7,000-$16,000 with structural work.
What moves the number is what we find when the wall opens: steel jamb replacement, reframing for an undersized opening, or wiring that has to be relocated to clear the new header. We write a line-item allowance into every contract for structural work, and any change is priced and approved by you in writing before we touch it. Our estimates are free. Call (954) 280-4413 and we’ll schedule a walk-through with a background-checked, uniformed technician.
What Coral Springs Homeowners Should Expect When Replacing a Door
Here’s what actually happens when Broward County HVHZ code meets a 1970s CBS wall, and how we keep the job moving. First, we inspect. Before we quote a door replacement in Coral Springs, we open enough of the existing trim to see the jamb condition, the rough opening size, and what’s inside the wall cavity. On older homes, that wall cavity often hides outdated wiring, rotted framing, or a jamb that’s rusted through. We find it at the estimate stage, not after the permit is pulled.
Second, we write allowances into the contract. You approve the door, the hardware, and a structural allowance that covers reframing, jamb replacement, or wiring relocation if the wall gives us a surprise. Third, any change gets priced and approved in writing before we do it. No stop-work orders, no ballooning bill, no HOA rejection after the fact. That’s how we’ve handled door installations in Coral Springs, and it’s why homeowners call us when they’re done guessing.
On a 1970s CBS ranch in the Cypress Run neighborhood, our crew pulled the original single-pane aluminum entry door to find the steel jamb rusted through and the rough opening undersized for today’s HVHZ code. We ordered a custom-fabricated impact-rated ViewLux door with a fusion-welded frame, reframed the opening, applied flashing tape from sill to header, and closed the permit with a final inspection that cleared both the city and the HOA architectural board. That’s the job done the way it should be.
We Also Serve Cities Near Coral Springs
TruePane handles Coral Springs work directly with local crews, and we also run installations in Margate, Coconut Creek, Pompano Beach, and Plantation. If you’re on the edge of the city or your HOA overlaps a neighboring municipality, call us and we’ll confirm the service area in a minute. The HVHZ requirements don’t stop at the city line, and neither do we.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Coral Springs
Yes. Coral Springs is entirely within Broward County’s High Velocity Hurricane Zone, so any replacement door with glass, and most solid entry doors, must be HVHZ-certified impact products installed with approved anchoring methods. A door that would pass code in Palm Beach County won’t pass here. We carry only HVHZ-certified doors for Coral Springs work, and we register certification documentation with both the city and your HOA. Call (954) 280-4413 if you want to verify what your current door has.
Because Coral Springs was master-planned from the 1960s onward with strict architectural guidelines, and many HOAs still enforce the original design standards: door colors, profiles, grid patterns, and even hardware finishes. An installer who doesn’t submit the HOA package before ordering the door is setting you up for a rejection and rework bill. We submit the HOA application and the city permit at the same time, so the door you approve is the door that gets installed.
Expect outdated wiring routed through the wall cavity, rusted steel jambs, and framing that doesn’t meet current header span requirements. On 1970s CBS construction, the wall cavity is narrow, and the original rough opening was often framed to the minimum. When we widen an opening, we relocate wiring to clear the new header, replace the jamb, and reframe to current HVHZ code. That work is written into the contract as an allowance, and any change is priced and approved before we start. Call (954) 280-4413 for a free inspection of your existing opening.
Fogged glass means the insulated glass unit has lost its seal, and in Coral Springs’s humidity, that’s a failure you’ll see within a decade on cheap doors. Moisture is now inside the glass, the thermal performance is gone, and the door’s impact rating can be compromised if the lamination is degraded. It’s not cosmetic. We replace the glass unit with a new HVHZ-certified sealed panel, or replace the slab if the frame is also compromised. The fix usually runs $450-$1,200 depending on the door’s glass size and whether it’s impact-rated.
Almost never. The 1960s CBS ranch homes in Coral Springs were built with narrow rough openings and headers sized for a single door, not a double. Widening to a standard double French door means cutting concrete block, installing a new header, reframing the opening, and likely relocating wiring. That’s structural work, and it has to be permitted and inspected. Our bids include the structural line items up front, so you know the full number before we cut anything. Call (954) 280-4413 to have us measure your wall and tell you what’s actually involved.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs through a second-generation glazier’s commitment to work that stands up to Broward County’s code and the test of South Florida summers.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.