Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Kenneth City
Door installation in Kenneth City, FL typically costs between $950 and $3,200 depending on the door type, framing condition, and whether the existing opening needs reframing to meet current wind-load code. Most standard entry door replacements in Kenneth City are completed in one day, but homes built between 1955 and 1970 often carry non-standard rough openings that add framing labor. Call (954) 280-4413 to schedule a free estimate. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway.
Why TruePane Windows & Doors Is Kenneth City’s Preferred Door Installation Company
Our Door Installation team has spent years opening up walls in Kenneth City’s mid-century concrete block homes and we know exactly what we’re going to find behind that old door frame. Salt-corroded jambs, undersized rough openings, and the occasional code-triggered header rebuild. None of it surprises us and none of it goes on your bill without a written signature from you first.
Dale Kessler founded TruePane on a rule that still governs every install: if the pane is not true, the job is not done. That applies as much to a plumb door jamb as it does to a square window frame. Homeowners in Kenneth City call us because they want a company that will still answer the phone in thirty years, not a franchise that swaps out its crews every spring. Our background-checked, uniformed technicians work in your home the way they would work in their own mother’s.
We are an authorized installer for more than a dozen manufacturer lines including, PGT, and CGI. Side-by-side quotes on paper. Both warranty layers registered in writing before we leave. Every job covered by the Done Right Promise. A live person answers our phone 24 hours a day, 7 days a week. We stand behind it, in writing.
Our Door Installation Services in Kenneth City
Entry & Swing Doors
Most Kenneth City homes have a single front entry on a CBS wall that has not been touched since the house was built. The original aluminum door binds in July because the salt air has been eating at the jamb for fifty years. We remove the old unit, document what the permit requires, and build the opening back to current code before setting the new pre-hung door. This is the standard service for the majority of our Kenneth City callers.
Storm Doors
A storm door on a mid-century concrete block home in Kenneth City does more than keep rain off the entry. It gives you a second layer of wind protection during the afternoon thunderstorms that roll off Tampa Bay, and it buys the main entry door years of extra life against salt-laden humidity. We frame the storm door to the existing entry and ensure the latching hardware can handle Pinellas County wind gusts without rattling loose.
Double & French Doors
Double door openings in 1950s and 1960s Kenneth City homes are prime candidates for reframing. The original header spans were often built for lightweight panels, not modern insulating glass units with impact ratings. We inspect the header before quoting, because a French door conversion on an original jalousie opening almost always requires complete header reconstruction to meet wind-load code. We price that in writing before any cutting starts.
Bifold & Folding Doors
Bifold and folding door work in Kenneth City usually shows up on Florida rooms and carports, where the louvered jalousie panels have become impossible to seal. Converting those openings to a true folding door system means rebuilding the opening, not just swapping panels. We take the same inspection-first approach, write the allowance into the contract, and get sign-off on any change before we touch the wall.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kenneth City
We stock and install more than a dozen manufacturer lines, including Andersen, Pella, Marvin, PGT, and CGI. For impact-rated work in Kenneth City, we quote PGT and CGI units side by side so you see the exact price difference and warranty terms on paper. We also service CWS and Ply Gem units already installed in homes around Pinellas County. If your existing door is under a manufacturer warranty, we register it in writing before the truck leaves. Parts for common models are staged close enough that we can get most replacements handled without a second appointment.
Common Door Installation Problems We See in Kenneth City Homes
- Corroded aluminum jambs from salt air. The daily humidity coming off the Gulf and Tampa Bay eats at door jambs until the door binds within a year of install. We see this on original mid-century entries throughout Kenneth City, often hidden behind trim until the permit inspection fails.
- Non-standard CBS rough openings. Nearly every home in Kenneth City was built between 1955 and 1970, and the original door rough openings are frequently 1/2 inch to 3/4 inch undersized for modern pre-hung units. That means chiseling or packing out framing on-site, which leaves air gaps if not done properly.
- Jalousie door conversions misquoted as simple frame replacements. The louvered openings still found on Kenneth City carports, Florida rooms, and some main entries require complete header reconstruction to meet wind-load code. A quote that treats it as a simple swap will blow up mid-job.
- Rotted framing behind the door. By the time a Kenneth City homeowner calls about a door that will not close, the framing behind it has often been absorbing moisture for a decade. We document it, sister new pressure-treated framing, and get written approval for the additional cost before we close the wall.
Pricing for Door Installation in Kenneth City, FL
Here are the line-item ranges we quote for Kenneth City work, based on standard CBS construction and current Pinellas County permit fees.
- Entry door replacement (standard pre-hung): $950 to $1,800
- Impact-rated entry door: $1,600 to $3,200
- Storm door installation: $400 to $900
- Double or French door conversion (with header rebuild): $3,000 to $6,500
- Reframing an existing opening to current code: $240 to $600, added to the base install
- Permit fees and inspection: $150 to $400, depending on scope
The labor cost for reframing a non-standard opening is the most common adjustment on a Kenneth City install, and we write that allowance into the contract on the front end. You will not get a change order you were not told about and you will not pay a penny that was not approved in writing first. A square deal. Call (954) 280-4413 for a free estimate with the numbers written down before you decide anything.
We Also Serve Cities Near Kenneth City
Beyond our Kenneth City door installation work, we serve homeowners through Pinellas County and into the surrounding metro, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are in one of those neighborhoods, the same TruePane crew, the same Done Right Promise, and the same inspection-first approach applies. Call and we will schedule a time to look at the opening before anyone quotes a number.
Serving Kenneth City, FL - Our Local Coverage Area
We’re based in the Kenneth City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Kenneth City
Because Pinellas County requires wind-borne debris protection on every exterior door, and most original mid-century homes in Kenneth City have rough openings that were never built to current code. The inspector checks the door’s Florida Product Approval, the anchoring, and the flashing. If the frame was not properly rebuilt around a non-standard jamb size, it fails. We handle this by doing the inspection-first, documenting what the permit needs, and building to code before the inspector shows up. Call (954) 280-4413 to have your opening measured and quoted correctly the first time.
We stop the install, document the condition with photos, and write up the exact additional labor and material cost before we touch the wall further. On a 1962 CBS home off 54th Ave N, our crew removed a corroded aluminum entry door whose frame had rotted at the jamb from decades of salt-laden humidity. They found the original rough opening was 5/8 inch too narrow for a standard Andersen 200 Series door, sistered new pressure-treated framing, applied flashing tape, and set the new impact-rated unit. The additional $240 in labor was written up and signed by the homeowner before the wall was closed. That is how every surprise is handled.
You cannot reuse a jalousie frame because the louvered opening was never designed to carry the weight of an impact-rated door and will not meet Pinellas County wind-load code. The header above the opening has to be rebuilt to carry the new load path. Any quote that skips this step will fail inspection, and the door will not perform in a storm. We quote the header rebuild as a line item so you see the real cost before work starts. Call (954) 280-4413 for an exact quote on your specific opening.
Look for three signs the salt air and humidity have done their work: moisture streaks on the interior drywall around the jamb, a fogged or hazy glass insert, and a door that binds in the frame in July but swings freely in January. All three point to failed seals or a wall opening that has moved out of true. We will measure the opening, check the framing, and tell you honestly whether you need a full replacement or a repair. Estimates are free.
A standard mid-century CBS home in Kenneth City typically has a rough opening of about 37 1/2 to 38 inches wide and 81 1/2 to 82 inches tall. Modern pre-hung doors in 36 by 80 inch nominal sizing need roughly 38 1/2 by 82 1/2 inches to set properly. That means most original openings are 1/2 inch to 3/4 inch too narrow or short, which is why we reframe on almost every entry replacement in these homes. It costs between $240 and $600 in labor and we write that allowance into the contract up front. Call (954) 280-4413 and we will measure your opening and put the real numbers on paper.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Kenneth City and Pinellas County with door and window installation done right since 2008.
To schedule your free door installation estimate in Kenneth City, call (954) 280-4413. A live person answers, every time. We will measure your opening, quote manufacturer lines side by side in writing, and stand behind the work with the Done Right Promise and The Keystone Standard.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.