Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Lauderhill
Door installation in Lauderhill almost always starts with the same discovery: the rough opening in your concrete block wall was never framed for a modern pre-hung door. That’s the Lauderhill reality we work with every week, from the 1960s CBS ranches off NW 47th Avenue to the 1970s condo buildings near Inverrary. We’re TruePane Windows & Doors, and we’ve built our entire door installation process around masonry openings, impact-rated code compliance, and the whole-house opening inspection that Broward County now enforces. If you’re wondering what a new entry, French, or custom door will actually take in your Lauderhill home, call us at (954) 280-4413. We’ll walk you through it in plain language and give you a written, fixed price before anything gets ordered.
Why TruePane Windows & Doors Is Lauderhill’s Preferred Door Installation Company
We’re not a franchise operation running crews through Lauderhill on a rotation. We’re a second-generation glazier’s company, led by Dale Kessler, and we’ve spent years working South Florida’s masonry housing stock. Our technicians know that a 1972 CBS ranch near Lauderhill Middle School has a completely different opening condition than a 1980s condo unit in Highland Lakes. That knowledge changes what we quote, what we order, and how we flash the perimeter so afternoon thunderstorms don’t drive water behind the jamb.
Our Door Installation team works in uniform, background-checked, and measures every opening twice before a quote goes to paper. We register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s not a marketing line. It’s the reason Lauderhill homeowners who’ve been burned by a sagging door or a failed inspection call us back for the next opening. And when you call, a live person answers. Every time. Not a voicemail tree, not a callback form.
We serve all of Lauderhill, from the single-family streets near West Ken Lark Park to the condos off NW 55th Avenue. Our dispatch is coordinated from the South FL office, but the crews working your door live and work in Broward County. We’ll be there when we say.
Our Door Installation Services in Lauderhill
Entry & Swing Doors
This is the job we do most often in Lauderhill, and it’s rarely a simple swap. Most of the city’s 1960s and 1970s CBS homes have door openings cut directly into the block with no wood framing. A standard pre-hung entry door will not fit those openings correctly without buck framing, custom jamb extensions, and a proper flashing detail. We price all of that up front, in writing. What you get is a door that swings true in July, seals against the wind-driven rain, and passes the whole-house opening inspection the first time. A basic impact-rated fiberglass entry door in Lauderhill typically runs $2,800 to $5,200 installed, depending on the opening condition and the manufacturer line you choose.
Double & French Doors
Double and French door installations in Lauderhill carry a specific set of code obligations. Florida’s wind-borne debris region requirements mean both leaves of a double door assembly must be impact-rated or fully protected, and the active leaf must meet specific structural loading. We’ve replaced plenty of original 1970s aluminum French doors in Lauderhill where the threshold had corroded through and the slab had shifted. A new impact-rated double French door in Lauderhill generally falls between $6,500 and $12,000 installed, with the spread driven by glass package, manufacturer, and how much masonry work the existing opening demands.
Bifold & Folding Doors
A bifold or folding door system in a Lauderhill CBS home usually means opening an exterior wall that was never designed for a wide span. That requires a structural header, and in block construction that header work is a real engineering task. We coordinate with local engineers and pull the permit ourselves, so the header, the lintel, and the anchorage are all figured before the door is ever ordered. Lauderhill homeowners installing a folding door system should budget $9,000 to $18,000 or more, depending on the number of panels, the glass rating, and the structural work the opening requires.
Pivot Doors
Pivot doors are heavy. A fully impact-rated pivot door with custom glass can weigh 300 pounds or more, and in a Lauderhill concrete block wall that weight has to transfer properly through the jamb and into the masonry. We’ve done pivot door installs in Lauderhill where the original opening had no lintel at all, just a steel angle that had rusted out over fifty years. Every pivot door we install in Lauderhill gets a structural review of the opening before we commit to a price. Expect $5,500 to $14,000 installed for a true custom pivot door, with lead times running 8 to 14 weeks on the door slab alone.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lauderhill
We’re an authorized installer for more than a dozen manufacturer lines, and for Lauderhill’s impact-rated requirements we regularly quote, PGT, and CGI side by side on paper so you can see exactly what you’re paying for. We also work with ES Windows and ECO Window Systems when a job calls for a specific glass package or a custom configuration. Stocking parts for Lauderhill customers matters less here than ordering the right opening size the first time, because a mismeasured masonry opening means a 10-week lead time doubles to 20. We measure twice. Dale Kessler’s rule: if the pane is not true, the job is not done.
Common Door Installation Problems We See in Lauderhill Homes
- A new impact door hung in a raw masonry opening with no buck frame. The jamb has nothing solid to anchor to, so it flexes every time the door closes. Within a year the door sags, the sweep drags on the threshold, and the lock no longer lines up. We fix these by pulling the door, installing a proper pressure-treated buck frame, re-flashing the perimeter, and re-hanging the door correctly.
- A homeowner replaces only the front door while a jalousie utility-room door stays non-compliant. Broward County’s whole-house opening inspection does not care that the jalousie is on a laundry room. It fails the permit, the job stops, and the homeowner is left with a hole in the wall and a door on backorder. We check every opening before we order a single door.
- A door installed without full perimeter flashing tape. Lauderhill’s afternoon thunderstorms hit hard and fast. Water gets behind the jamb, sits against the raw CBS block, and rots the interior trim from the inside out. By the time you see the staining, the damage is done. We flash every perimeter with butyl tape from sill to header, no exceptions.
- Original 1970s aluminum door frames corroded by humidity. Inland Lauderhill gets the same humidity as the coast without the ocean breeze. Aluminum frames oxidize, thresholds pit, and the glazing seals on sidelights fail. We see fogged sidelight glass on roughly half of the original doors we quote in Lauderhill’s older housing stock.
Pricing for Door Installation in Lauderhill, FL
Here are honest numbers for Lauderhill’s market, based on the work we’ve done across the city. A standard impact-rated entry door runs $2,800 to $5,200 installed. A double French door runs $6,500 to $12,000. A custom pivot door runs $5,500 to $14,000. The two things that move the price most in Lauderhill are the condition of the masonry opening and the lead time on the door slab you select. Custom glass, arched tops, and high-end hardware add cost. What you will not see is a change order halfway through the job. Our price is fixed in writing before anything is ordered. Call (954) 280-4413 for a free, written estimate on your specific door.
We Also Serve Cities Near Lauderhill
Our door installation crews work throughout central Broward County. In addition to Lauderhill, we regularly serve homeowners in Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re just outside the city line, call (954) 280-4413 and ask. We’ll let you know straight whether your address falls in our service area.
Serving Lauderhill, FL - Our Local Coverage Area
We’re based in the Lauderhill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Lauderhill
Yes, in most cases. Broward County’s whole-house opening inspection applies to every exterior opening on the home, not just the door you’re replacing. If you have a jalousie door on a utility room or a non-impact sliding door in a Florida room, the permit will not close until those openings are brought into compliance. We find this on nearly every 1960s and 1970s Lauderhill home we quote. Past owners replaced the street-facing doors to satisfy older, less strict inspections and left the rest alone. Our advice: let us check every opening before you commit to buying one door. Call (954) 280-4413 and we’ll come out free.
Because your door rough opening was cut directly into the concrete block, with no wood stud framing. A standard pre-hung door is designed for a wood-framed rough opening with studs to anchor into. In a Lauderhill CBS home, you need a buck frame, pressure-treated lumber furred out to create a proper jamb anchor surface, and custom jamb extensions to cover the masonry depth. Skipping this step is the single most common cause of binding, sagging, and failed inspections we see in Lauderhill. We include the buck frame and jamb extension work in every quote. It’s not an upcharge. It’s the job.
Usually no, not without written HOA approval. Lauderhill’s 1970s condo complexes, particularly those around Inverrary and the inland lakes, typically have uniform building exterior standards written into their covenants. A pivot door is a visible exterior modification. Before we quote a pivot door in a Lauderhill condo, we ask for the HOA’s architectural review requirements in writing. If the HOA allows it, we coordinate the structural review and the permit. But the HOA approval is the homeowner’s responsibility, and we recommend getting it before ordering a door with a 10-week lead time. For exact guidance on your unit, call (954) 280-4413.
The door slab itself, particularly if it’s impact-rated with custom glass or an arched top. A standard impact entry door from Pella or PGT typically runs 4 to 8 weeks. A custom pivot door or an arched impact unit can run 10 to 16 weeks, sometimes longer if the glass is a specialty laminate. Hardware is rarely the bottleneck. The structural work, like buck framing and lintel repair, happens on our schedule, not the factory’s. We tell every Lauderhill customer the same thing: the lead time on the door drives the calendar, so order early and let the written price protect you while you wait. Estimates are free. Call (954) 280-4413.
Yes, a fogged insulated glass unit is a seal failure, and it’s covered by the manufacturer’s glass warranty if that warranty is still in force and was properly registered. This is exactly why The Keystone Standard matters. We register both manufacturer warranty layers in writing, with durations stated, before the truck leaves your driveway. If your door came from us and the glass fogs, call us. If it came from someone else and you have the paperwork, call us anyway. We’ll tell you honestly whether it’s covered. Serve you right the first time, that’s a square deal. Call (954) 280-4413.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lauderhill and central Broward County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.