Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Palm Springs
Door installation in Palm Springs means meeting a higher standard than most of Palm Beach County. This village runs its own building department, and its inspectors check wind-load anchoring, flashing, and permit paperwork more closely than almost anyone around. If you’re replacing an entry door on a 1950s-1970s CBS ranch, we know exactly what the inspector will look for and which products pass without a second visit.
TruePane has installed and replaced doors across Palm Springs for years, from entry swing doors on Davis Road to storm doors on Congress Avenue. Our Door Installation team measures every opening twice, quotes manufacturer lines side by side on paper, and registers both warranty layers before the truck leaves the driveway. Call (954) 280-4413 for a free estimate on any door project in Palm Springs.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Door Installation Company
Homeowners in Palm Springs tend to keep their houses for decades. They remember the contractor who set a door out of true and left it binding in July. That’s why they call us. Founded by second-generation glazier Dale Kessler, TruePane has spent years in the trade, and the founding rule is still on the whiteboard: if the pane is not true, the job is not done.
We work in Palm Springs every month, and our technicians know this housing stock. Most homes here are single-story CBS ranch builds from the mid-20th century with standard 6’8″ door openings and original aluminum frames that have spent fifty or sixty years in humidity and salt air. That means corrosion, failed seals, and jambs that will not hold a wind-load anchor until they are properly rebuilt. We plan for that before we quote, not after we start.
Every TruePane job comes with the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave your driveway. No paperwork fights. No arguing. A live person answers our phone 24 hours a day, 7 days a week, so when you call about a door in Palm Springs, you reach a person who knows the work.
Our Door Installation Services in Palm Springs
Entry & Swing Doors
Entry doors take the most abuse in Palm Springs: direct sun, driving rain, and wind gusts that push against the panel year after year. We replace original wood and aluminum entry doors with impact-rated units designed for this wind zone, set into rebuilt jambs with flashing tape and fusion-welded framing. A new entry door should not just close; it should be square, anchored, and documented for your insurance file.

Storm Doors
In a village where afternoon thunderstorms roll through from the Atlantic about 12 miles east, a storm door is not decorative. It protects the primary door from driving rain and adds a second layer against wind pressure. We install storm doors that mate cleanly with your existing entry, with proper sweep seals at the sill and latch alignment tested before we leave. No binding. No gaps. No callbacks.

Double & French Doors
Double doors are common on Palm Springs patios and rear entries, and they fail in predictable ways here. Hinges sag under the weight of impact-rated glass, the center astragal lets water through during a hard storm, and the inactive leaf drifts out of alignment over time. We rebuild the frames, install correct anchors into the CBS block, and set both leaves so they meet flush and latch properly the first time.

Bifold & Folding Doors
For homeowners opening a rear wall to a screened patio or pool, bifold and folding door systems need more than a nice look. The track, the rollers, and the anchoring into the header have to hold up under 140-150 mph design wind speeds. We install these systems with the same permit and inspection discipline as any entry door, so the finished opening is code-compliant from day one.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
TruePane is an authorized installer for more than a dozen manufacturer lines. For Palm Springs homeowners, we typically quote Andersen, PGT side by side on paper so you can see the differences in glazing, frame construction, and warranty before you spend a dollar. We also work extensively with ES Windows for custom and oversized openings where the homeowner wants a specific look without sacrificing wind-load performance. When a part is on backorder, we know which suppliers in the county actually stock replacement hardware for each brand, so a Palm Springs job does not stall while someone waits on a regional warehouse.
Common Door Installation Problems We See in Palm Springs Homes
- Rotted or corroded original jambs. Most Palm Springs homes were built between 1955 and 1975, and original wood or aluminum jambs have spent decades in humid, salty air. Setting a new impact door into an old frame fails the village inspection for wind-load anchoring, and the inspector will require the jamb rebuilt with proper flashing before signing off.
- Unpermitted door replacements from previous owners. We run into this constantly. Someone swapped a door years ago without pulling a permit, and now the Village of Palm Springs has flagged the property during a roof or addition permit. The homeowner has to replace a perfectly functional door simply because it does not meet code and there is no paperwork.
- Sill leaks at swinging doors. A cheap swinging door without proper flashing tape leaks at the sill during afternoon thunderstorms. Water migrates into the jamb, rots the substrate, and eventually causes seal failure on adjacent windows. By the time someone calls us, the damage has usually spread further than the door itself.
- Doors that bind in summer. Humidity in Palm Springs causes wood and even some composite materials to swell. A door that opens fine in January binds badly by August, and most of the time the root cause is a frame that was never square. We measure every opening twice and true the jamb before hanging the slab, so seasonal movement is absorbed, not fought.
Pricing for Door Installation in Palm Springs, FL
A typical impact-rated entry door replacement in Palm Springs runs $2,800-$5,500, including the new slab, frame rebuild, hardware, flashing, permit, and inspection. Storm door installation typically runs $900-$1,800, depending on the brand and whether the existing frame is sound. Double or French door replacement runs $4,500-$9,500 for impact-rated units set into rebuilt openings. Bifold or folding door openings start around $7,000 and run upward based on panel count, glazing, and structural work at the header.
What moves the number is the condition of the existing jamb, whether the opening is standard 6’8″ or oversized, and whether the permit and inspection are included. We always include both in our quotes. That is a square deal. Call (954) 280-4413 and we will walk your door with you, measuring and quoting on the spot.
We Also Serve Cities Near Palm Springs
TruePane serves homeowners throughout the region, including Palm Springs itself and nearby communities like Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are close enough to Palm Springs that our crews are already running jobs here during the week, we can usually schedule your estimate within a day or two and the work within the same week, depending on the scope.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Palm Springs
Palm Springs requires a permit for any door replacement that changes the frame, anchoring, or glazing, which covers nearly every entry door job. The village runs its own building department, and inspectors treat an unpermitted door as a violation that must be corrected before any other permit on the property can close. We handle the permit on every full replacement and arrange the inspection as part of the job. Call (954) 280-4413 if you are not sure whether your door qualifies.
Palm Springs homes fall under a design wind speed around 140-150 mph, and the door assembly, including the frame anchors, must carry a Florida Building Code product approval for that zone. This means the glazing, the frame, the hardware, and the anchoring into the CBS block all have to be documented as a tested system. A cheap solid-core door bolted into an old jamb will not pass. We quote only products that carry current Florida product approvals for this exact wind zone.
No, not if the jalousie door is original to a 1950s-1970s Palm Springs home. Jalousie assemblies are non-compliant with Florida Building Code wind-load requirements and cannot be brought into compliance with a storm door added over them. The storm door protects against rain, but the primary door is still the weak point in a wind event. The correct fix is a full-frame replacement with an impact-rated entry door, and in many cases the inspector will not accept anything less. Call (954) 280-4413 to have us look at what you have and tell you straight what the village will accept.
A documented, permitted, impact-rated door replacement gives your insurer proof that the opening meets current wind-load code. Unpermitted work, or a door without a Florida product approval, can become a coverage problem after a storm claim. On a 1962 CBS ranch near Davis Road, we pulled an original aluminum jalousie entry and reset the opening with fusion-welded framing and a ViewLux impact-rated door. The village inspector signed off the same week, and the homeowner now has a compliance record their insurer specifically asked for. That paper trail is part of the job, not an add-on.
A compliant quote includes the permit, the village inspection, the product approval documentation, the frame rebuild to anchor into CBS block, flashing tape at the sill and jamb, and manufacturer warranty registration. A cheap handyman quote typically includes the slab and maybe some caulk, and the inspector will reject the anchoring the first time it is checked. Then you pay twice: once for the cheap door, and again for a real install. We quote it once, complete, on paper, with every line item stated. Call (954) 280-4413 for that quote.
Get Your Door Installed Right in Palm Springs
Palm Springs has a building department that checks, inspect inspectors who remember problem properties, and housing stock that predates every modern wind code. You need crews who know the difference between a compliant anchor and a few screws in a rotted jamb. TruePane has spent years learning that difference, and we stand behind every door we install in Palm Springs with a written warranty, a registered manufacturer guarantee, and a Done Right Promise. If there is a problem after we leave, we come back and fix it. No fine print, no arguing. Call (954) 280-4413 to schedule your free estimate, and we will walk the property, measure the openings, and quote the job on paper while we are there.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and surrounding communities with square door installations since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After