Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Pembroke Park
Door installation in Pembroke Park is not a generic job. It is a Broward County code exercise, a masonry anchoring problem, and a hurricane-season decision all at once. Every permitted exterior door replacement here must carry a Miami-Dade Notice of Acceptance (NOA) or an approved Florida Product Approval. That is not a preference. It is the law under the High-Velocity Hurricane Zone designation, and it shapes everything from the door you choose to how we fasten it into your concrete block wall. Our crews work in Pembroke Park weekly and know exactly which products pass inspection here and which ones waste your money. Call (954) 280-4413 for a free estimate.
This page will tell you what Pembroke Park homeowners need to know before anyone touches a rough opening: the NOA paperwork, the Tapcon anchoring, the noise factor off I-95, and the honest price ranges for this market. If you review nothing else, review the pricing section and the first FAQ.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Door Installation Company
TruePane Windows & Doors was founded in 2008 by second-generation glazier Dale Kessler. For many years, through a heritage of glass and door work, the standard has been one sentence left on a whiteboard: if the pane is not true, the job is not done. That governs every entry door we hang on a Pembroke Park concrete block home.
Pembroke Park is not where you want a crew learning how CBS construction works. Most of the houses we enter were built between the 1950s and 1970s, and the rough openings were framed for thin aluminum doors that no longer meet 160 mph design wind requirements. When we set a jamb into solid block, we anchor with Tapcon masonry screws, not wood screws. That is a detail that determines whether your door passes a Broward County HVHZ inspection or fails it. We have pulled enough failing jambs off Pembroke Park homes to know the difference.
Our Door Installation team is background-checked and uniformed, and a live person answers our phone 24 hours a day, seven days a week. You will never fight a callback form. You call, a person answers, and we schedule a time when a technician actually shows up. That matters in a town where half the frustration comes from chasing contractors who disappear after the deposit.
Our Door Installation Services in Pembroke Park
Entry & Swing Doors
Most Pembroke Park entry door replacements start with one discovery: the existing jamb was never meant to hold a modern impact-rated slab. On a 1960s CBS home off Pembroke Park Road, we pulled an original single-pane aluminum entry door and found the masonry jamb so undersized for NOA-rated hardware that the permit inspection would have failed on wind-load anchoring. Our crew set new Tapcon anchors into the block, flashed the rough opening with self-adhered flashing tape, and installed a fusion-welded impact-rated door with laminated glass. The HVHZ inspection passed on the first visit. That is how we handle entry doors here: we assume the original opening is wrong, measure twice, and build it right before the door goes in.
A standard in-swing entry door replacement in Pembroke Park runs $1,400 to $3,200 installed, depending on slab material, glass package, and hardware. Impact-rated fiberglass slabs with laminated glass start higher, generally $2,800 to $4,800. We quote both manufacturer lines side by side on paper so you see exactly what you are buying.
Storm Doors
Storm doors in Pembroke Park serve two purposes that inland cities never deal with: they shield the primary entry door from driving rain during summer thunderstorms, and they add a second layer of protection against wind-driven debris. That does not make them a hurricane alternative. A storm door is not a substitute for an NOA-rated impact door. What it does is buy your primary door a few more years of finish life and give you cross-ventilation on days when the humidity is tolerable.
We install vented and full-view aluminum storm doors, typically $450 to $950 in Pembroke Park, with hardware included. For homeowners on Hallandale Beach Boulevard near the older neighborhoods, we often recommend a full-view storm door on the front and a vented unit on a rear or side entry.
Double & French Doors
French doors and double entry doors magnify every issue a single door presents. Two slabs, twice the weatherstripping, a center mull post, and a threshold span that has to be perfectly level on a concrete block floor. In Pembroke Park, we also contend with the fact that many of these older CBS homes settled decades ago, and the existing double-door opening is no longer square by a quarter inch or more.
We shim, level, and anchor both jambs independently before setting the slabs, then adjust the astragal so the doors close without dragging. An impact-rated double French door installation in Pembroke Park runs $3,500 to $7,000, with the range driven by glass package, swing configuration, and whether we are enlarging or reframing the existing opening.
Bifold & Folding Doors
Bifold and multi-panel folding doors are increasingly common on Pembroke Park homes where a back patio or pool deck was added later. These systems put heavy point loads on the header and side jambs, and on a CBS home that means the anchoring and the header work have to be correct before the panels ever hang. An undersized header over a four-panel folding system will sag within two seasons. We inspect the lintel and the block condition above the opening, then tighten tolerances before the track is mounted.
Folding door installations in Pembroke Park start around $4,200 and can exceed $9,000 for multi-panel impact-rated runs. We provide written, line-item pricing before any work begins, and we do not change the number after the fact.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. For Pembroke Park specifically, we quote CGI and PGT impact-rated doors frequently because those product lines carry the Miami-Dade NOA approvals the building department expects to see. We also work with ES Windows and ECO Window Systems where a homeowner wants a specific profile or custom finish. When we quote these lines side by side, you see the actual price difference between a good door and a grade above it. Parts delays are minimal because we keep common threshold packages, hinges, and hardware on our service vehicles and can pull manufacturer products quickly for the Pembroke Park market.
Common Door Installation Problems We See in Pembroke Park Homes
Forty-plus years of opening doors on older South Florida block homes teaches you the same failure patterns. These are the ones we find most often in Pembroke Park:
- Skipped NOA paperwork. A crew installs an impact door but never pulls the Miami-Dade NOA or Florida Product Approval documentation. The inspector comes for the final, asks for it, and the permit stalls. We register the NOA with the paperwork before the truck leaves your driveway.
- Wood screws in CBS block. Impact-rated doors are heavy, and in a 160 mph design wind zone they exert real pull force on the jamb. Standard wood screws into concrete block work loose. We anchor every jamb with Tapcon masonry anchors sized to the block, not what fits a wood stud.
- Old threshold pans left in place. Some bids keep the existing aluminum threshold and caulk the new door to it. On a Pembroke Park CBS slab, that traps water against the concrete and rots the sub-sill from underneath. We pull the old pan, inspect the block, and flash the opening before the new sill goes down.
- Jalousie and thin-frame jamb reuse. Homes with original louvered jalousie windows and doors often have rough openings that do not match modern 36-inch door slabs. Some installers chisel the block and force a door in. That is how you get a binding door and a failed inspection. We measure the opening, tell you what slab actually fits, and reframe properly when needed.
Pricing for Door Installation in Pembroke Park, FL
A typical entry door replacement in Pembroke Park runs $1,400 to $3,200. Impact-rated entry doors start around $2,800 and top out near $4,800 for laminated glass and upgraded hardware. Storm doors run $450 to $950. French doors and double-door systems run $3,500 to $7,000 depending on the glass package and whether we are restructuring the opening. Folding door systems start around $4,200 and can exceed $9,000 for multi-panel impact-rated runs.
What moves the number in Pembroke Park specifically: whether the existing rough opening matches the new slab, whether the block is solid enough for Tapcon anchoring without repair, and which NOA product line you choose. We price all of it in writing before you sign. Call (954) 280-4413 for a free estimate on any door installation in Pembroke Park. Nobody is going to corner you with a surprise line item after the fact.
We Also Serve Cities Near Pembroke Park
Our crews work throughout the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are looking for Door Installation in Pembroke Park or a neighboring town, the same NOA standards and anchoring practices apply. Call us and we will tell you honestly whether your job falls within our regular service route.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Pembroke Park
Pembroke Park falls inside Broward County’s High-Velocity Hurricane Zone, which means every permitted exterior door replacement must meet Miami-Dade or Florida Product Approval standards regardless of how the existing door looks. The NOA is the piece of paper that proves the door and frame assembly has been tested to the required wind pressures. Without it, the final permit cannot be signed off. Call (954) 280-4413 for a quote on a properly documented, NOA-approved door replacement.
Yes, often. When a permit is pulled on a 1950s to 1970s CBS home in Pembroke Park, the inspector checks the anchoring, the flashing, and the wind-load hardware for the new door, not just the cosmetics. If the existing jamb is undersized or the header is insufficient, those items must be corrected. Our approach is inspection first, then a written allowance in the contract, and any additional work is priced and approved in writing before we touch it. That is how we prevent permit-stage surprises. Call (954) 280-4413 to schedule a pre-quote inspection.
Yes. The same laminated glass that carries the NOA for hurricane protection also has measurable sound-attenuation properties. On Pembroke Park streets that back up to or face the I-95 corridor, homeowners replace a thin aluminum door with an impact-rated laminated-glass door and immediately notice lower highway noise. We have installed enough doors along that corridor to tell you the difference is real, though not silence. Expect a meaningful reduction, not a recording studio. Call (954) 280-4413 for options.
Then the opening needs to be modified, not forced. On Pembroke Park block homes, the rough openings built for louvered jalousie units were frequently undersized for today’s 36-inch and wider door slabs. We cut or reframe the block opening properly, install a new header and king studs where needed, and flash the opening before the new jamb goes in. We tell you this in the estimate, not after the door arrives and does not fit. Call (954) 280-4413 and we will measure it correctly the first time.
We pull the old threshold pan, clean the block surface, and apply self-adhered flashing tape across the sill and up the jambs before setting anything. Then we bed the new threshold in sealant and anchor the jamb with Tapcon masonry screws, not wood screws. The overlapping layers shed water away from the rough opening. This is the exact method we follow on Pembroke Park CBS homes, and it is why we do not see water-damaged sub-sills on our own work. Call (954) 280-4413 for a full inspection of your existing threshold.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.