Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterHow Much Does Door Installation Cost in Pittman, FL?
Door installation in Pittman typically runs $900-$4,800 depending on the door type, frame condition, and whether custom sizing is required. A standard pre-hung fiberglass entry door on a wood-frame home usually lands between $1,400 and $2,600 installed. Manufactured homes with HUD-spec rough openings almost always push toward the higher end because the door must be custom-ordered or heavily shimmed to fit. Call (954) 280-4413 for a written line-item quote, not a guess over the phone.
Most Pittman homeowners we talk to aren’t shopping for the cheapest bid. They’ve watched a hollow-core door rot at the jamb or a west-facing entry bind every July. They want to know the real number, the right material for this climate, and whether the company will still answer the phone in five years. That’s the conversation we’re built for.
Fast, Reliable Door Installation Across Pittman
If you live off Pittman Road or in one of the older manufactured-home clusters near the St. Johns River corridor, you already know what this climate does to a door. Humidity works the bottom jamb. Afternoon thunderstorms drive rain sideways against west-facing entries. And the housing stock here, much of it built before Florida’s post-Andrew building code overhaul, wasn’t framed for modern door sizes anyway. Our Door Installation crews understand that Pittman isn’t a cookie-cutter subdivision. It’s older wood-frame homes on acreage, HUD-spec mobile homes, and a lot of openings that don’t match anything on a shelf. We coordinate scheduling and dispatch from our Miami office, but the technicians who show up at your door know St. Johns County permitting, wind-zone material requirements, and what happens to a cheap door here within a decade. Call (954) 280-4413 and a live person answers. No voicemail tree, no callback form.
Why TruePane Windows & Doors Is Pittman’s Preferred Door Installation Company
TruePane was founded in 2008 by Dale Kessler, a second-generation glazier who built the company on a rule that’s still on the whiteboard: if the pane is not true, the job is not done. We’ve carried that same standard into every door we hang. When we set a frame in Pittman, we measure the opening twice, quote the manufacturer line side-by-side on paper, and register both warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s not a marketing phrase. It’s a written practice.
Pittman customers tend to be long-term homeowners, people who’ve lived in the same house for twenty years or more and plan to stay. They remember the contractor who left them with a fogged seal and a door that binds in August. We earn their trust by doing the work right the first time and standing behind it with a Done Right Promise. If it’s not done right, we make it right. No paperwork fights, no arguing. That promise matters in a rural community where word travels faster than the trucks do.
Our technicians are background-checked and uniformed. They work in your home the way they’d work in their own mother’s. And because we’re an authorized installer for more than a dozen manufacturer lines including PGT, CGI, and CWS, we can put two or three quotes side by side on paper so you see exactly what you’re buying, not just a name we picked.
Our Door Installation Services in Pittman
Entry & Swing Doors
Most of the entry doors we replace in Pittman are hollow-core units on 1970s and 1980s wood-frame homes. They rot at the bottom jamb first, then the subfloor starts to give. We specify fiberglass entry doors with fusion-welded frames and marine-grade stainless hinges for this climate. A swing door on a home near the St. Johns River corridor has to shed water every afternoon for five months straight. Cheap hardware can’t do that.
Storm Doors
A storm door in Pittman has to do two jobs. It protects the primary entry door from driven rain and afternoon sun, and it ventilates during the shoulder seasons when the humidity is brutal but the AC isn’t running hard. We install storm doors with full-view glass, retractable screens, and frames that don’t warp when the west side of the house bakes from 2 to 6 p.m. Most importantly, we check the rough opening against the existing door’s swing and latch geometry before ordering anything.
Double & French Doors
Double doors on older Pittman homes often separate a living room from a patio or sunroom. The problem we see repeatedly is sagging on the active leaf, which throws off the reveal and lets air leak through the meeting stile. We install French doors with adjustable hinges and a heavy-duty astragal, and we set the threshold with a proper slope so water runs away from the interior. For homes that face open pasture, we recommend impact-rated glazing on any French door with a large glass area.
Bifold & Folding Doors
Bifold and folding doors are common on laundry areas, pantries, and closets in Pittman’s older homes and manufactured units. The failure mode is almost always tracked hardware and misaligned panels from years of humidity cycling the wood. We replace worn tracks, realign panels, and when the opening is a HUD-spec size, we order custom-width panels rather than shim a standard door into a hole it was never meant for.
Pivot Doors
Pivot doors are becoming more popular with Pittman homeowners replacing a dated front entry and wanting something heavier and more substantial. A pivot door carries its entire weight on a top and bottom pivot rather than standard hinges, which means the frame and rough opening have to be true. In an older wood-frame home, that often requires reframing the opening or adding structural blocking. We do the framing work, not just the door hang.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pittman
We’re an authorized installer for PGT, CGI, and CWS, among others. That matters in Pittman because these manufacturers build for Florida’s wind zones and humidity levels, not a generic national standard. We keep direct relationships with their supply chains, which means faster turnaround on custom-ordered sizes and direct access to warranty support when you need it. If you’ve had a door installed by another contractor and the brand is fighting you on a warranty claim, call us. We know how to register both manufacturer warranty layers in writing and keep the paperwork straight.
Common Door Installation Problems We See in Pittman Homes
- Rotted bottom jambs on hollow-core exterior doors. Summer humidity and afternoon thunderstorms push water into the threshold joint, and once the wood starts to go, the door loses its seal and the subfloor follows. We replace the frame, not just the door panel.
- HUD-spec rough openings on manufactured homes. Doors built to federal HUD dimensions don’t match Florida residential code openings. Installers who don’t know this over-shim the door, leave uneven gaps, and within two seasons the door won’t latch squarely.
- West-facing door warping and seal failure. The afternoon heat gain on a west-facing entry is relentless from May through October. Wood frames cup and the door binds against the jamb. We specify fiberglass or steel with a thermal break and set the reveal to accommodate seasonal movement.
- Fogged glass in older storm doors. Once the insulated glass unit loses its seal, the only real fix is replacement, not defogging. Pittman’s humidity accelerates this failure on doors that are ten to fifteen years old.
Pricing for Door Installation in Pittman, FL
Here’s what we typically see in Pittman, based on the homes and manufactured units we’ve worked on:
- Pre-hung fiberglass entry door: $1,400-$2,600 installed
- Custom-ordered entry door for HUD-spec opening: $2,200-$4,200 installed
- Storm door, full-view with retractable screen: $700-$1,400 installed
- French door, impact-rated glazing: $3,000-$5,500 installed
- Bifold or folding door replacement: $500-$1,200 installed
Custom sizing, reframing, and impact-rated glazing all move the price upward. A door that has to meet Florida Building Code wind-zone requirements costs more than a basic inland-spec door. We’ll show you the difference on paper, side by side, before you commit. Call (954) 280-4413 to schedule a free estimate. We give you a written line-item quote, not a range on a voicemail.
We Also Serve Cities Near Pittman
Beyond Pittman, our crews work in Door Installation in Pittman and the surrounding communities including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re on the edge of the county line or just outside one of these areas, call and ask. We’ll tell you straight whether we can get a crew to you this week.
Serving Pittman, FL - Our Local Coverage Area
We’re based in the Pittman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Pittman
Because much of Pittman’s manufactured-home stock was built to HUD specifications, not Florida residential code dimensions. These rough openings are often an inch or two narrower or taller than standard pre-hung door sizes. A contractor who quotes the job expecting an off-the-shelf door will either over-shim the frame, leaving gaps that leak air and water, or eat the cost of a custom order on the back end. We measure every opening twice and order the door that fits. Call (954) 280-4413 for a quote that accounts for the actual opening, not an assumption.
Pittman gets slightly less salt spray than St. Augustine, but the humidity load is just as punishing, and the afternoon thunderstorm pattern is actually more intense inland during the summer months. Wood door frames west of the St. Johns River corridor cup, warp, and rot faster than rated. We specify fiberglass frames with fusion-welded corners and marine-grade stainless hardware for most Pittman installations. A cheap wood frame might last five years here. A fiberglass frame should go twenty.
Yes, in most cases. Once you pull a permit for a full door replacement on a home in a Florida wind-borne debris region, the Florida Building Code requires impact-rated glazing for any glass in that door, even if the original door was grandfathered. That applies whether the glass is a full view in a French door or a single decorative lite in an entry door. We pull the permit, schedule the inspection, and make sure the door meets code before we call the job done. Call (954) 280-4413 and we’ll tell you exactly what your specific opening requires.
Fogged glass in a storm door means the insulated glass unit has lost its seal. Moisture from Pittman’s high humidity gets inside the unit, condenses between the panes, and there’s no way to clean it out. The fix is replacing the glass unit or the entire door, not defogging. On a ten- to fifteen-year-old storm door, replacement is usually the better value. We’ll show you the replacement cost against the cost of just replacing the glass and let you decide. Estimates are free at (954) 280-4413.
Yes, and the math is straightforward. A properly fitted storm door on a west-facing entry cuts direct afternoon heat gain in the summer, which lowers the AC load during the hottest hours of the day. On a wood-frame home with a single-pane primary door, the energy savings alone typically offset the storm door cost within five to seven years. Add in the protection from driven rain and reduced UV damage to the primary door, and the payback is faster than most people expect. Call (954) 280-4413 for a free estimate with numbers specific to your home, not a national average.
Get Your Free Door Installation Estimate in Pittman
If you live in Pittman and you’re tired of a door that binds in July, rots at the jamb, or lets the afternoon storm blow straight through, call us. Dale Kessler built TruePane Windows & Doors on a simple promise: if the pane is not true, the job is not done. We apply that same standard to every door we hang, every frame we set, and every warranty we register in writing. Call (954) 280-4413 and a live person answers. We’ll schedule a time to measure your opening, give you a written quote, and tell you exactly what your door needs to stand up to ten more years of Florida weather.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pittman and surrounding St. Johns County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.