Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across University
Most door replacements in University come down to one question: will it pass inspection the first time? We install doors that meet Hillsborough County’s current FBC wind-load and impact requirements, every time. If you own or manage a rental near USF, you know the drill: a permit gets pulled for a roof, an inspector walks the property, and suddenly the original hollow-core front door from 1974 is flagged. That’s the call that brings us out. TruePane Windows & Doors has served University for years, and we know exactly what the county will sign off on. Call (954) 280-4413 for a free estimate on any door replacement in University.
Why TruePane Windows & Doors Is University’s Preferred Door Installation Company
University is a specific kind of market. The housing stock runs dense with 1960s through 1980s concrete-block rentals and low-rise apartment complexes built for USF’s expansion. What that means for doors is predictable: hollow-core entries, aluminum sliders with lift-and-shimmy locks, and jambs that have been fighting Tampa humidity for forty years. We have replaced enough of them to know what is behind the trim before we pull it.
Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That carries into doors. Our technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. University customers deal with one crew, background-checked and uniformed, working the way they would work in their own mother’s house.
We pull the permit, schedule the inspection, and stand behind the work with our Done Right Promise. No paperwork fights, no arguing, no fine print. A live person answers the phone 24/7 in University and throughout the Bay area. When an investor calls from out of state about a flagged door on Fowler Avenue, they get a straight answer and a written line-item quote, not a callback form.
Our Door Installation Services in University
Entry & Swing Doors
Entry doors in University’s rental stock are frequently the original hollow-core units installed in the 1970s. They were never rated for exterior wind loads, and after four decades of humidity cycling, many have warped enough to let daylight show around the jamb. We replace them with solid-core exterior-rated doors, set in new jambs where the block-wall framing has rotted, and fitted with weatherstripping that handles a Tampa summer. A standard prehung exterior door in University runs $900 to $1,800 installed, depending on glass and hardware.

Double & French Doors
Double and French door sets show up most often in University’s slightly newer stock, the 1980s frame-built rentals closer to Fletcher Avenue. The failure pattern is consistent: the inactive leaf settles, the astragal loosens, and the locking point no longer lines up. We rebuild the rough opening, square the frame, and install both leaves as a unit. French door replacement in University typically runs $1,400 to $3,200, with fiberglass sets on the lower end and impact-rated units higher.

Bifold & Folding Doors
Bifold doors in University mostly appear as closet and laundry doors inside older apartment units, but folding patio doors are growing in the mid-range rental remodels we see. The issue with cheap original bifolds is track wear and misaligned pivot hardware. We set new track, hang the panels true, and adjust the pivot points so the door opens with one hand. Expect to pay $500 to $1,200 for a standard interior bifold replacement, and $2,500 to $5,000 for a folding exterior door system.

Pivot Doors
Pivot doors are an uncommon upgrade in University’s rental-dominant market, but they appear in the handful of owner-occupied mid-century blocks near the USF campus and in custom remodels. A pivot door carries its weight on a floor pivot and top pin rather than side hinges, which demands a precise frame and a level floor. We install pivot systems from $2,800 to $6,500, depending on slab size and hardware. For a door that weighs 200 pounds, the rough opening is not the place to save money.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in University
We are an authorized installer for manufacturer lines that Hillsborough County accepts under current wind-load codes:, PGT, CGI, and ES Windows among them. For University rentals, we quote products from at least two manufacturers side by side so you can see the rated pressure difference on paper. We stock common parts for University jobs in our South Florida shop, which keeps a replacement on schedule when a landlord needs a unit turned over before a lease starts. If you have a CGI slider that needs new rollers or a Jeld-Wen entry that needs a threshold, we handle the repair under the same Done Right standard as a full replacement.
Common Door Installation Problems We See in University Homes
- Hollow-core interior doors installed as exterior entries. This was common practice in 1970s concrete-block construction in University. These doors fail wind-load requirements within one Tampa summer and will not pass a permitted replacement. We see them constantly on Fowler Avenue and Fletcher Avenue rental blocks.
- Rotted wood jambs inside block walls. Original aluminum frames corrode in high humidity, but the wood buck inside the block is what fails. A new door screwed into a rotten buck will blow open in the first named storm. We replace the buck, flash it, and set the new frame true.
- Non-impact-rated sliders installed without permits. Landlords trying to save money skip the permit and install a standard glass slider. Hillsborough County inspectors flag it, the work fails, and the door has to come out and be replaced with a rated unit. The cheap quote becomes the expensive redo.
- Lift-and-shimmy aluminum sliders. These 1970s units are ubiquitous across University’s rental corridors. The panels lift out of their tracks with a pry bar, which tenants know and insurers are starting to notice. We replace them with fusion-welded frames and multipoint locks that meet current FBC ratings.
Pricing for Door Installation in University, FL
Door replacement in University reflects the market here: dense rental stock, frequent permit requirements, and products that have to carry a wind-load rating. A standard entry door replacement runs $900 to $1,800. Impact-rated entry doors start around $1,600 and reach $3,000 with glass and upgraded hardware. Sliding glass door replacement, the most common job we do in University, runs $1,800 to $4,500 depending on size and whether it is impact-rated. An arched or custom door pushes into $3,500 to $7,000 territory. The single biggest cost factor in University is compliance: pulling the permit, meeting wind-load documentation requirements, and scheduling the inspection. A quote that omits the permit is not cheaper. It is incomplete. We provide written line-item quotes with permit costs and product ratings stated clearly, and the price does not change once the work starts. Call (954) 280-4413 for a free estimate.
We Also Serve Cities Near University
TruePane Windows & Doors serves University and the surrounding communities across the Greater Tampa Bay area. If you own or manage property in Acacia Villas, Alafaya, Altamonte Springs, or Altoona, the same crew and the same Done Right standard apply. Our Door Installation team covers the whole corridor, and we schedule work around tenant turnover dates whenever we can. See what residents of Door Installation in University rely on from TruePane.
Serving University, FL - Our Local Coverage Area
We’re based in the University area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in University
University falls under Hillsborough County’s FBC wind-zone classification, which means any permitted door replacement must be rated for the design pressure specified for the structure’s exposure category. In practice, most entry doors in University need a design pressure rating of at least DP-40, and sliding glass doors in ground-level rentals near USF typically require impact-rated or shutters-protected glazing. We determine the required rating for your specific address and pull the permit accordingly. Call (954) 280-4413 and we will check your property’s exact requirement.
You do not have to replace them until you pull a permit for other work, but once an inspector sees them, replacement becomes mandatory. University’s original hollow-core exterior doors do not meet current FBC wind-load requirements, and Hillsborough County inspectors routinely flag them during unrelated permit inspections. We replace them with rated entry doors and document the compliance for your records. Call (954) 280-4413 for a free assessment.
Insurers in Florida increasingly ask for wind-mitigation documentation, and a rated door with a permit and final inspection does factor into that determination. The key is having the paperwork: permit number, product approval numbers, and the inspection sign-off. We register both warranty layers and provide the compliance documentation with every job. If you own rental property in University, that paperwork is worth more than a small premium discount; it is evidence if a claim is denied. Call (954) 280-4413 to get your property documented correctly.
A compliant TruePane quote includes the permit fee, the product’s design pressure or impact rating stated in writing, flashing and jamb repair, and the final inspection. A cheap quote leaves out the permit, installs whatever door is on the shelf, and hopes no one looks. In University, someone always looks. The landlord who takes the cheapest bid often pays twice: once for the first install and again for the compliant replacement after a failed inspection. Call (954) 280-4413 and we will send a quote in writing with every line item stated.
In most cases, a replacement sliding glass door in University needs to meet the FBC wind-load standard for the property’s exposure category, which for ground-level units near USF generally means an impact-rated door or an approved shutter system. Standard non-rated sliders will not pass a permitted inspection. On a 1970s quadraplex off Fletcher Avenue, we replaced three lift-and-shimmy aluminum sliders that inspectors flagged during a roofing permit, installing impact-rated Jeld-Wen sliders with fusion-welded frames and flashing tape, plus a solid-core entry door with a multipoint lock. We pulled the permit and secured final inspection the day before tenants moved in. Call (954) 280-4413 to find out what your specific building needs.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving University and the Greater Tampa Bay area since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After