Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Plantation Mobile Home Park
Energy-efficient window replacement in Plantation Mobile Home Park runs $450 to $1,200 per window installed, depending on whether you need a standard Low-E unit or an impact-rated model that meets HUD wind-load standards. Most replacements in the community take one day once the units arrive, and TruePane coordinates the HUD compliance paperwork so the job gets done right the first time. Call (954) 280-4413 for a free estimate from a crew that understands manufactured housing, not just site-built homes.
Plantation Mobile Home Park is not like the subdivisions a mile east on Broward Boulevard. Every opening is a non-standard size, every frame is aluminum, and every wind-load calculation runs through HUD’s Manufactured Housing Construction and Safety Standards rather than the Florida Building Code. We work on those terms every week. If you’re looking for Energy-Efficient Windows that actually fit a mobile home rough opening, we’re the crew that measures twice before the first cut.
Key Takeaways for Plantation Mobile Home Park Homeowners
- All replacements must meet HUD Manufactured Housing standards, not Florida Building Code; impact glass must carry a Florida Product Approval for manufactured homes.
- Standard big-box double-hungs run 3 to 4 inches too tall for mobile home rough openings.
- A compliant quote includes re-skinning the aluminum exterior, butyl flashing tape, and documented U-factor and SHGC ratings for your insurance file.
- Energy-efficient replacements in Plantation Mobile Home Park average $450 to $1,200 per window, with impact-rated Low-E units at the high end.
- TruePane registers both manufacturer warranty layers in writing before the truck leaves Community Drive.
Why TruePane Windows & Doors Is Plantation Mobile Home Park’s Preferred Energy-Efficient Windows Company
Dale Kessler founded TruePane in 2008 on a rule that’s still on the whiteboard: if the pane is not true, the job is not done. We have spent the years since working on manufactured housing in communities like Plantation Mobile Home Park, because the work rewards patience and punishes shortcuts. A crew that only knows how to hang a window in a site-built home will leave you with panel gaps and a voided warranty.
Every technician who works in Plantation Mobile Home Park is background-checked and uniformed. They measure every opening twice. They know that the aluminum skin around a mobile home window buck is structural, not decorative, and they know how to cut it clean and seal it with butyl flashing tape so the argon fill stays where it belongs. We stand behind the work with the Done Right Promise, and we register both warranty layers, durations stated, before the truck leaves your driveway.
We serve the whole of Plantation Mobile Home Park, from the homes along Park Road to the units back by the community’s eastern edge. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree, not a callback form. You call, a person picks up, and you get a straight answer.
Our Energy-Efficient Windows Services in Plantation Mobile Home Park
We focus on four services that matter most in a manufactured home community, where the sun and the salt air work on aluminum frames year-round.
Low-E & Argon Gas Glass
Low-E glass with an argon fill cuts the solar heat gain that turns a mobile home into a slow oven by 4 p.m. in July. In Plantation Mobile Home Park, where units sit close together with limited shade on the western end of the community, that glass pays for itself in a single cooling season. We quote U-factor and SHGC ratings on paper so you can see the number before you sign.
ENERGY STAR Replacement Windows Sized to HUD Rough Openings
ENERGY STAR certified windows only earn that label if the whole unit meets performance standards for South Florida’s climate zone. The catch is that most off-the-shelf ENERGY STAR windows are made for site-built rough openings that are 3 to 4 inches taller than what a manufactured home frame will accept. We source ENERGY STAR replacement windows sized to HUD rough openings, so you get the label and the fit without one being sacrificed for the other.
Double & Triple Pane Windows
Double-pane Low-E is the workhorse for most Plantation Mobile Home Park homes, cutting both heat gain and the outside noise from Broward Boulevard. Triple-pane makes sense in a smaller number of cases, usually when a homeowner wants maximum storm-noise reduction and the incremental cost is acceptable. We will quote both side by side on paper and let you see the difference in U-factor before you decide. No pressure, no upsell.
UV-Blocking & Fade Protection
UV-blocking coatings on Low-E glass slow the fading of furniture, flooring, and fabrics, and in a South Florida mobile home with ten large windows, that difference shows up within a few years. The UV transmission number is part of the glass package we quote, and we can tell you exactly what percentage of UV radiation each option blocks. It is a small detail that matters a lot when you’re replacing windows once and expecting them to last two decades.
Window Energy Audits & Ratings
We do not guess at U-factor and SHGC, and we do not quote a window without the numbers. A window energy audit in Plantation Mobile Home Park gives you a written report of what your current windows transmit and lose, and what a replacement would change. That report is the document your insurance company wants in the file after the next named storm, and it is the difference between a claim that gets paid and one that gets fought.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation Mobile Home Park
TruePane is an authorized installer for PGT, CGI, and Ply Gem, and we carry parts and track for their manufactured-home-specific lines. That matters in Plantation Mobile Home Park because a PGT impact unit built for a site-built home won’t fit a HUD rough opening without butchery. We stock and source the lines that carry Florida Product Approval for manufactured housing, and we have been quoting PGT and CGI side by side on paper long enough to know which one holds up better in salt-laden air. When you call, you get an honest comparison, not a brand pitch.
Common Energy-Efficient Windows Problems We See in Plantation Mobile Home Park Homes
- Corroded aluminum frames and tracks. Salt-laden coastal air eats the aluminum frames and tracks that are standard in mobile home construction, especially on the homes along the community’s northern edge where morning sun burns off the dew slower. Once the track is corroded, the window seals fail and the sash hangs out of square.
- Single-pane jalousie windows that bleed conditioned air. Older units in Plantation Mobile Home Park still have louvered jalousie windows that offer almost no seal and no hurricane resistance. They are the single biggest energy leak in these homes, and they are the first thing we recommend replacing.
- Site-built replacement units that do not fit HUD rough openings. A standard double-hung from a home center is 3 to 4 inches taller than the opening in most manufactured homes. The result is butchered framing or panel gaps, and we see the aftermath of that shortcut all the time.
- Weatherstripping decayed by humidity. Florida humidity breaks down mobile home weatherstripping in two to three seasons. When the stripping goes, so does the seal, and the air conditioner runs constantly just to hold 78 degrees. We replace the stripping as part of the unit replacement, not as an afterthought.
Pricing for Energy-Efficient Windows in Plantation Mobile Home Park, FL
A standard Low-E, double-pane replacement in Plantation Mobile Home Park runs $450 to $750 per window installed. An impact-rated Low-E unit, the kind required to satisfy Florida wind-load requirements for manufactured housing, runs $800 to $1,200 per window. Triple-pane with impact glass lands at the top of that range or slightly above. The number that moves the price most is whether the opening needs to be re-sized and the aluminum skin re-skinned, which we include in the quote rather than burying it as a change order. You get a written line-item estimate before any work starts, and the price on that sheet is the price on the bill. Call (954) 280-4413 to schedule a free estimate.
We Also Serve Cities Near Plantation Mobile Home Park
TruePane crews work throughout the area around Plantation Mobile Home Park, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re just outside the community and need a manufactured-home window specialist, call (954) 280-4413 and ask for a free estimate. We’ll tell you straight whether we service your street.
Serving Plantation Mobile Home Park, FL - Our Local Coverage Area
We’re based in the Plantation Mobile Home Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Plantation Mobile Home Park
Yes, replacements in Plantation Mobile Home Park must comply with HUD Manufactured Housing Construction and Safety Standards, not the Florida Building Code, and depending on the scope, the community may require a permit and a compliance sign-off. We handle the paperwork and the inspection coordination as part of the job, and we do not start cutting until the compliance path is clear. Call (954) 280-4413 for a free estimate that includes the permit and HUD documentation.
Almost never. Standard double-hung units are built for site-built rough openings that run 3 to 4 inches taller than the openings in manufactured homes, so a straight swap forces butchered framing or leaves panel gaps. We source manufactured-home-sized units that fit HUD rough openings without modification. Call (954) 280-4413 and we’ll measure your openings before we quote.
In Plantation Mobile Home Park, any impact-rated window must carry a Florida Product Approval for manufactured homes and meet the wind-load requirement for your specific zone, typically 60 psf or higher depending on exposure. A non-impact jalousie replacement may pass HUD but still fail the wind-load requirement, which voids insurance coverage after the first storm. We quote the exact rating on every unit we install, and we register the documentation in writing for your insurance file. Call (954) 280-4413 for a compliant quote.
In some cases, yes, and we’ll tell you honestly whether a glass-only replacement makes sense or whether the frame is too corroded to save. We replaced a corroded jalousie unit in a Park Road home with a fusion-welded, impact-rated double-hung carrying a 60 psf wind-load rating and Low-E glass, cutting out the aluminum skin, resizing the rough opening to a manufactured-home sash, and sealing the re-skinned frame with butyl flashing tape so the argon fill stays put through the next hurricane season. That is the standard we work to whether we replace glass or the whole unit. Call (954) 280-4413 and we’ll give you a straight answer.
A compliant quote includes HUD standard compliance documentation, the Florida Product Approval number for the impact-rated glass, re-skinning the aluminum exterior around the new buck, butyl flashing tape at every seal, and written U-factor and SHGC ratings for your insurance file. A cheap quote leaves all of that out, and the cost of the omission shows up after the first tropical storm as a denied claim. Our quote is line-itemed and fixed before work starts. Call (954) 280-4413 to get one that protects you, not just one that fits a budget.
Ready for an Honest Quote in Plantation Mobile Home Park?
Call (954) 280-4413 and ask for a free estimate on energy-efficient windows in Plantation Mobile Home Park. A live person answers, and we’ll schedule a time to measure your openings, quote the right units for HUD compliance, and put every number on paper. The work is done right or it is not done. That is the only way we have ever worked.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation Mobile Home Park with manufactured-home window expertise and HUD compliant installations.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.