Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Plantation Mobile Home Park
Window installation in Plantation Mobile Home Park runs $250-$550 per window for a HUD-compliant mobile-home unit, installed, depending on the window style and whether the aluminum exterior skin around the rough opening needs to be cut and re-skinned. Most of the jobs we do here start because a jalousie louver has seized, a seal has fogged, or an awning window has rattled loose in a wind gust and let water behind the thin exterior panel. If you live in Plantation Mobile Home Park and your windows are fighting you, call us at (954) 280-4413. We will come measure, quote side by side on paper, and tell you straight what the job actually requires.
We know this community runs on manufactured-housing rules, not the Florida Building Code that site-built contractors quote from memory. That changes everything about the job: the rough openings, the wind-load path, the flashing, the trim. If a standard residential window crew shows up with 36-inch site-built assumptions, they are going to leave you with a window that does not close square and a bill that does not match the work. We will not.
Why TruePane Windows & Doors Is Plantation Mobile Home Park’s Preferred Window Installation Company
The Keystone Standard is the reason people in Plantation Mobile Home Park call us instead of the first number they find. Before the truck leaves your driveway, both manufacturer warranty layers are registered in writing, with durations stated on paper. The workmanship itself is covered by the Done Right Promise. If it is not done right, we make it right. No paperwork fights, no arguing, no fine print that covers neither.
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. Years of community service sits behind that sentence. We are not a franchise playbook. We hire local, train apprentices into journeymen, and act like a company that plans to be in town in thirty years. When you call (954) 280-4413, a live person answers. Not a voicemail tree, not a callback form. Day or night.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper, so you see exactly what you are buying and what you are not. Most jobs in Plantation Mobile Home Park are completed in a single visit. That is a square deal, and we mean it.
Our Window Installation Services in Plantation Mobile Home Park
Sliding Windows
Sliding windows are the closest thing a mobile home has to a site-built picture window. The trouble in Plantation Mobile Home Park is that the aluminum tracks corrode fast in salt-laden air, and once the sashes bind, they never get better on their own. We replace sliding windows with marine-grade track material sized to the exact rough opening, and we re-skin the surrounding aluminum panel where the old frame has pitted. You get a window that slides with two fingers and keeps water out of the wall cavity.
Awning Windows
Awning windows in manufactured homes do double duty: they ventilate during the wet season and they keep driven rain out when they are shut. The weak point in Plantation Mobile Home Park is the hardware, not the glass. Salt air eats the crank mechanisms and the hinges. We specify corrosion-resistant hardware for every awning window we install here, and we bed the frames in sealant that will not peel away from the aluminum skin under South Florida humidity.
Casement Windows
Casement windows give you the cleanest sightline and the tightest seal when closed, but they need a square rough opening to seal properly. In Plantation Mobile Home Park, the rough openings in older single-wides are rarely square, and the aluminum framing has usually flexed a little over the years. Our crews correct the opening before they set the frame. That extra step is the difference between a window that seals and a window that whistles in a July thunderstorm.
Fixed and Picture Windows
Fixed picture windows in a mobile home usually sit on a wall with no structural header to carry the load, which is why HUD rules treat them as an integral part of the wall system, not a punched opening. We install impact-rated fixed units that meet Florida’s wind-load requirements for manufactured housing and anchor them through the wall framing the way HUD actually requires. No shortcuts, no site-built assumptions.
Single and Double Hung
Single- and double-hung windows are a practical replacement for jalousie louvers in Plantation Mobile Home Park. They seal tight, they are easy to operate, and they do not rattle in a wind gust. We order hung windows sized to mobile-home rough openings, which are narrower and shorter than the site-built standard. That means we are not trimming out a half-inch gap around the frame with shims and caulk and calling it done.
Bay and Bow Windows
Bay and bow windows in a manufactured home require floor-reinforcement underneath the projection and a re-skin of the wall where the old opening was. Most site-built contractors in Plantation have never cut a HUD wall open. Our crews work on mobile-home walls every week. We know where the steel outriggers sit, how much weight the perimeter can take, and how to flash the projection so water cannot follow the joint behind the aluminum skin.
Garden and Basement Windows
Garden windows are rare in Plantation Mobile Home Park, but when our customers want them, we install them as a boxed projection with a sealed aluminum pan underneath. The pan is the part most contractors skip, and the part that fails first here. We make the pan from the same marine-grade sheet we use to re-skin the wall. It will not rust through in five years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation Mobile Home Park
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and ES Windows. When our Plantation Mobile Home Park customers need a replacement in a hurry, we do not have to wait on a regional distributor 200 miles away. We stock mobile-home-specific parts and track components locally, because we know a seized louver on a Friday afternoon is not something you want to wait until Tuesday to fix. Our Window Installation team can quote any of these lines side by side on paper, so you see the actual price for the actual window, not a model number the contractor hopes you will not look up.
Common Window Installation Problems We See in Plantation Mobile Home Park Homes
- Aluminum frames pitted and jammed from salt-laden air. The frames on an older unit will literally grow white oxide blooms around the sashes. If the sash is not marine-grade, it will seize within months of install, not years.
- Jalousie louvers with failed weatherstripping. The louvers bleed conditioned air and rattle loose in gusts. Water follows the failed seal into the wall cavity behind the thin exterior skin, and by the time you see the stain inside, the studs have been wet for a year.
- Flashing tape that peels from the aluminum skin under humidity. Standard butyl flashing tape does not bond to aluminum skin. Contractors who do not know mobile-home construction use it anyway. The seal fails around the jamb, and the leak comes back.
- Site-built 36-inch door frames forced into 32-inch openings. This one we see at least once a month in Plantation Mobile Home Park. The door buck on a manufactured home holds a 32-inch slab. Force a 36-inch site-built frame into it and you cut through the aluminum skin, the buck twists, and the door binds in July. The repair is a half-day sheet-metal job.
HUD Compliance, Corrosion, and the Plantation Mobile Home Park Playbook
Every window and door job in Plantation Mobile Home Park falls under HUD Manufactured Housing construction standards, not the Florida Building Code. That is not a technical footnote; it is the entire job. The rough openings are narrower and shorter than site-built homes. The wall is thin aluminum skin over wood studs, not masonry or block. The wind-load path runs through steel outriggers that flex differently than a concrete tie-beam. A site-built residential contractor who has never cut a HUD wall open is going to order the wrong window, set it in the wrong opening, flash it wrong, and then argue with you when the water gets in.
This page gives you the exact HUD and corrosion-spec playbook for window installation inside Plantation Mobile Home Park, not the generic Florida Building Code advice a site-built contractor would hand you. The difference is not academic. It is the difference between a window that seals through its first hurricane season and a window that leaks through its first afternoon thunderstorm.
Pricing for Window Installation in Plantation Mobile Home Park, FL
A typical single-hung or sliding window replacement in Plantation Mobile Home Park runs $250-$400 per window, installed, with a standard mobile-home unit. Casement windows run $350-$550 per window. Bay and bow windows start around $900 and go up based on the floor reinforcement required under HUD rules. The variable that changes every quote in this community is the aluminum re-skin. If the old frame has corroded into the surrounding panel, the panel has to be cut out and replaced with marine-grade sheet. That adds $75-$150 per opening and a few hours of labor.
We do not quote a window over the phone without seeing the rough opening. You should not trust anyone who does. Call (954) 280-4413 and we will come to Plantation Mobile Home Park, measure every opening twice, and hand you a written line-item quote before any work is scheduled. The estimate is free. The price on the quote is the price on the bill. That is how a square deal works.
We Also Serve Cities Near Plantation Mobile Home Park
Our crews regularly work throughout Plantation Mobile Home Park and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If your home is in one of these areas and you are dealing with a corroded aluminum window frame or a seized jalousie louver, call us at (954) 280-4413 and ask for a measurement visit. We will schedule a time, show up when we say, and tell you what the job actually requires.
Serving Plantation Mobile Home Park, FL - Our Local Coverage Area
We’re based in the Plantation Mobile Home Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Plantation Mobile Home Park
Yes. Every window replacement in Plantation Mobile Home Park must meet HUD Manufactured Housing construction standards, not the Florida Building Code, and the unit must carry a HUD label for the wind zone it is installed in. You do not want a contractor who tells you to skip the paperwork. We pull the permits, we document compliance, and we register both warranty layers before we leave your driveway. Call (954) 280-4413 and we will walk you through exactly what your job requires.
Because the door buck in a manufactured home is built for a 32-inch slab, not the 36-inch standard used in site-built construction. The thin aluminum skin surrounding the frame must be patched or re-skinned after any door buck modification. That detail catches unprepared contractors off guard, and it usually turns a straightforward door swap into a half-day sheet-metal job. If someone hands you a quote for a 36-inch frame without mentioning the buck, they have not done this before.
Yes. Manufactured homes are inherently more wind-vulnerable than site-built housing, and HUD’s wind-load requirements for Plantation’s wind zone apply regardless of how far inland the community sits. A failed window in a storm loads the wall with pressure it was never designed to take. We specify impact-rated glazing for every window we install in Plantation Mobile Home Park, and we anchor the frames through the wall framing the way HUD requires. Cheaper windows here are not cheaper; they just fail sooner.
Look for white oxide blooms around the aluminum frames, louvers that no longer close tight, and weatherstripping that has turned stiff or crumbled. If the louvers rattle in a wind gust or you can feel conditioned air moving through the window when it is closed, the seal has failed. In Plantation Mobile Home Park, that is usually salt-air corrosion on the frames and tracks, and the fix is a replacement window with marine-grade hardware and track material. Call (954) 280-4413 and we will tell you what we are looking at, straight.
Usually not, but it depends on the rough opening and the condition of the existing aluminum skin. Fusion-welded vinyl frames are slightly larger than the old aluminum jalousies, so we frequently have to cut and re-skin the exterior panel to fit the new opening cleanly. We will know the answer after the measurement visit. We will not quote a number until we have seen the opening, because guessing is how walls get ruined.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation Mobile Home Park and surrounding communities since 2008 through a craft tradition that is still answering the phone.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.