Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Gun Club Estates
Sliding door replacement in Gun Club Estates typically runs $1,800 to $4,200 for a standard 72×80 impact-rated patio slider, installed. The number moves based on glass package, frame material, and what we find when the old unit comes out. Call (954) 280-4413 for a written line-item quote specific to your opening.
We work in Gun Club Estates every week. The homes here, mostly concrete block ranchers and split-levels from the 1970s through early 1990s, share a common story: original single-pane aluminum sliders that bind in summer, fog between the panes, and fail wind mitigation inspections. Our crews know these openings. We know what Palm Beach County inspectors look for, and we know how to schedule around county routing delays that municipal inspectors in nearby cities don’t face. If you’re planning to stay in this house, the right sliding door changes how the whole back of the home feels.
Why TruePane Windows & Doors Is Gun Club Estates’s Preferred Sliding & Patio Doors Company
We’re not a franchise van that shows up, slaps in a door, and hopes the phone never rings again. TruePane was founded by second-generation glazier Dale Kessler in 2008, and the company runs on a rule that’s been on Dale’s whiteboard since day one: if the pane is not true, the job is not done. That rule governs every sliding door we set in Gun Club Estates.
Every job gets both manufacturer warranty layers registered in writing before the truck leaves your driveway. That’s The Keystone Standard, and it means you know exactly what’s covered and for how long, not a verbal promise you’ll have to argue about later. We also back the workmanship with a Done Right Promise. If something isn’t right, we make it right. No paperwork fights, no fine print that covers neither. The homeowners in Gun Club Estates who call us have usually been burned once already by a rushed install or a warranty that evaporated. We write it down.
When you call, a live person answers. Not a voicemail tree, not a callback form. Our technicians are background-checked, uniformed, and they measure every opening twice before quoting. We quote manufacturer lines side by side on paper so you see exactly what you’re buying and what each option costs.
Our Sliding & Patio Doors Services in Gun Club Estates
This is the full scope of what we do in Gun Club Estates. Each service starts with a free estimate and a straight conversation about what your opening actually needs.
Patio Sliding Doors
The standard patio slider is the workhorse of Gun Club Estates homes, and it’s also the opening most likely to fail a wind mitigation re-inspection. We replace original single-pane aluminum units with impact-rated fusion-welded vinyl or aluminum sliders that carry a proper design pressure rating for Palm Beach County’s 140 mph wind-load zone. Low-E glass and argon fill are standard on our quotes, not add-ons we pitch later.

Heavy-Duty Sliding Doors
Some Gun Club Estates homeowners want an opening that’s wider than the standard 72 or 96 inches, or one that holds up to daily abuse from kids, dogs, and Florida thunderstorms. Heavy-duty sliding doors use reinforced frames and thicker glass packages. We’ve set these on homes where the original door had sagged so badly the panel dragged on the track. A heavier door needs a properly sized header and jambs. We check both before we order anything.

Panoramic Sliding Systems
If you’re opening the back of a Gun Club Estates home to the patio, a panoramic sliding system turns most of a wall into glass. These are multi-panel systems that stack or pocket into a recessed wall pocket. In an unincorporated Palm Beach County community, these jobs require county permits and engineering sign-off on the lintel. We handle the permit package and coordinate with the county’s Building Division from start to final inspection. See our full Sliding & Patio Doors service line for more on what these systems cost and how they’re engineered.

Pocket & Barn Doors
Pocket doors slide into a cavity inside the wall. Barn doors ride on an exposed track. Both are popular in Gun Club Estates homes where a swing door eats too much floor space. The catch with pocket doors: the wall cavity needs to be wide enough and clear of wiring and plumbing. On older concrete block homes, a true pocket cavity isn’t always possible without furring out the wall. We’ll tell you plainly if a pocket door doesn’t make sense for your floor plan, and we’ll quote the alternative.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gun Club Estates
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Gun Club Estates homeowners we regularly recommend PGT, CGI, and Ply Gem for sliding doors. PGT and CGI are Florida companies that build to Miami-Dade and Florida Building Code impact standards, which matters in this wind-borne debris region. Ply Gem offers a strong vinyl slider at a more moderate price point. We quote these lines side by side on paper, with the glass package, frame finish, and sash construction spelled out so you can compare apples to apples.
Common Sliding & Patio Doors Problems We See in Gun Club Estates Homes
- Fogged glass panels: Most original sliders in Gun Club Estates are single-pane, but those that were retrofitted with insulated glass from the 90s and 2000s now fog between the panes. That means the seal is gone, the argon has escaped, and the glass has lost most of its insulating value. The fix is glass replacement or a full unit swap.
- Corroded aluminum tracks and rollers: Decades of humidity and rain splash attack the original aluminum tracks on these homes. Rollers seize, the panel grinds, and eventually homeowners just stop using the door. We see this constantly on homes off Haverhill Road.
- Undersized or water-damaged framing: Many original Gun Club Estates slider openings were framed with the minimum lumber the 1970s and 80s code allowed. Water intrusion at the threshold rots the bottom plate and king studs. You can’t set an impact-rated door into a rotten opening. We re-frame as needed.
- Failed wind mitigation inspections: This is the one that costs homeowners real money. An original single-pane slider with no impact-rated glazing and no design pressure rating will fail a Palm Beach County wind mitigation re-inspection. Citizens Insurance has been shedding policies. A failed inspection means higher premiums or dropped coverage. Replacing that slider with an impact-rated unit is often the single most direct way to get the credits that drop windstorm premiums.
Pricing for Sliding & Patio Doors in Gun Club Estates, FL
Here’s what we’re quoting for sliding door work in Gun Club Estates right now. A standard impact-rated vinyl 72×80 patio slider runs $1,800 to $2,800. A heavy-duty or oversized slider in the 96-inch range runs $3,200 to $4,500. Panoramic multi-panel systems start around $7,000 and run up from there depending on panel count and glass package. Screen door installation alongside a slider runs $250 to $600 depending on frame size and mesh type.
What moves the number: the size of the rough opening, whether framing repair is needed, the glass package (impact-rated is required here, so that’s baseline), and the trim finish. We give a written line-item quote before any work starts. No change orders on surprise framing unless we show you what we found, in writing, and you approve it. Estimates are free.
We Also Serve Cities Near Gun Club Estates
TruePane crews serve Gun Club Estates and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those neighborhoods and dealing with a slider that binds or fogs, the same crew, the same warranty, and the same written quote process apply. Call us.
How Gun Club Estates Permitting Actually Works (and Why It Matters)
The biggest difference between replacing a sliding door in Gun Club Estates and doing the same job five miles east in Lake Worth is this: Gun Club Estates is unincorporated, so every permit runs through Palm Beach County’s Building Division, not a city hall. County inspectors cover enormous geographic territories. One inspector might be routed from West Palm Beach to Belle Glade in the same week. That means we can’t predict a two-hour inspection window the way a municipal job allows. We schedule multi-day inspection windows on every Gun Club Estates sliding door job, and we factor county routing delays into the timeline upfront. If a door takes three or four days instead of two, that’s usually why. It isn’t the labor. It’s the county’s calendar.
On a 1980s concrete block rancher in the Gun Club Estates neighborhood just off Haverhill Road, our crew removed an original single-pane aluminum slider whose track had corroded from decades of humidity, and whose framing showed water staining where old flashing tape had failed. We replaced it with an impact-rated, fusion-welded vinyl sliding door with low-E glass and argon fill, upgrading the rough opening with new jamb extensions and sill flashing to meet Palm Beach County’s 140 mph wind-load requirements. That job took four days from tear-out to final county inspection. Three of those days were waiting on the inspection appointment. The door itself went in on day one.
This is the thing no one tells you when you’re comparing quotes: an impact door is an impact door. The difference between a clean install and a frustrating one is whether your installer knows the county’s process. We know it. We’ve been doing it for years.
Serving Gun Club Estates, FL - Our Local Coverage Area
We’re based in the Gun Club Estates area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Gun Club Estates
Yes. Every sliding door replacement in Gun Club Estates requires a permit through Palm Beach County’s Building Division, not a city hall, because Gun Club Estates is unincorporated. The permit covers structural attachment, wind-load compliance, and impact glazing verification. TruePane pulls the permit, schedules the inspection, and handles the paperwork. The inspection timeline often runs a few days longer here than in incorporated cities nearby because county inspectors cover far larger territories. Call (954) 280-4413 and we’ll walk you through the timeline for your specific opening.
Yes. An impact-rated sliding door installed with the proper product approval and passed final inspection will earn credits on a Palm Beach County wind mitigation inspection, which in turn can cut windstorm premiums by hundreds of dollars annually. The key is that the unit must carry a valid Florida Building Code product approval, the glazing must be impact-rated or protected, and the installation must be documented. We register both warranty layers and provide the documentation your inspector needs. If you’re facing a Citizens Insurance non-renewal, this is one of the most direct ways to keep your policy.
Sometimes. If the original insulated glass unit failed because the seal went bad and the argon escaped, but the frame is still sound and square, a glass pack replacement is faster and cheaper than a full door replacement, typically running $400 to $900 per panel depending on glass type and size. But if the door is a single-pane aluminum original, there’s no glass pack to replace; it’s already just one pane, and the smart money goes to a full impact-rated replacement. We’ll tell you which applies to your door after measuring it. Call (954) 280-4413 for a free glass and frame assessment.
A standard patio slider replacement in Gun Club Estates takes one day for tear-out and install, plus a county inspection window that typically adds two to four business days because Palm Beach County inspectors cover large areas and can’t be scheduled to the hour. A heavy-duty or panoramic system, or any job with framing repair, adds time for the structural rough-in and possibly a second inspection. We’ll give you a written timeline before we start, and we won’t leave the job until the county signs off. Get your exact timeline by calling (954) 280-4413.
Yes. Most Gun Club Estates homes are 1970s-1990s concrete block ranchers with a clean, simple exterior. We offer sliding doors in white, bronze, and neutral frame finishes with clean lines that don’t fight that architecture. If you want a specific panel configuration or a divided-light look, we’ll quote it. We show you manufacturer photos of the actual door, not a brochure drawing. Call (954) 280-4413 and we’ll bring samples to your home.
Get a Free Estimate for Sliding & Patio Doors in Gun Club Estates
If your slider binds in July, fogs between the panes, or rattles in a thunderstorm, call TruePane at (954) 280-4413. We’ll send a uniformed, background-checked technician to measure your opening, check the framing, and give you a written line-item quote on paper. Free estimate, no obligation, and a square deal in writing. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Gun Club Estates and Palm Beach County.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After